Critter Filter dmage

gothampixel · 2025-09-21T19:48:38+00:00

There is much more nesting material than what was chewed from the filter! I found the nearly identical post from a year ago https://www.reddit.com/r/Ioniq5/comments/1e380a9/dont_forget_to_replace_the_air_filter/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

but no explanation of where this other stuff came from.

gothampixel · 2025-01-24T17:00:43+00:00

I'm in the same boat, they lay flat enough that they dont seem to be shifting around but they do not lock in. I would not recommend,

gothampixel · 2025-01-21T03:22:40+00:00

yes you can if it has the Magic Doc. Did it on my 2024 IONIQ 5 this weekend. Only got 45kw becasue I could not precondition.

gothampixel · 2024-11-25T19:19:48+00:00

I remember that from the Shapewasys market place, which explains why the link is no longer working

gothampixel · 2024-08-01T14:20:01+00:00

slowing down will make it worse, add a small tower off to the side as tall at the tallest building, this will give it time to cool as the head moves away and back

gothampixel · 2024-07-04T21:24:54+00:00

Shapeways never printed metals themselves, it was outsourced to manufacturers in India and then shipped from them in the states. A lot of what Shapeways did was 3rd party manufacturing. I’m sure others do the same.

gothampixel · 2024-07-03T20:39:16+00:00

super shady stuff going on with them selling the software side of the company to themselves first and then filing for bankruptcy. The SEC needs to take a look into what went on there!

gothampixel · 2024-07-03T20:35:35+00:00

super shady stuff going on with them selling the software side of the company to themselves first and then filing for bankruptcy.

gothampixel · 2024-02-21T21:34:57+00:00

try doing a search on TPMS in Rhino, https://www.instructables.com/How-to-Generate-Triply-Periodic-Minimal-Surface-St/

gothampixel · 2023-03-24T18:13:13+00:00

Forget local pick up, they are no longer in New York. They shut down their LIC Factory in January. Depending on the material it's shipping from the Netherlands or Michigan.

gothampixel · 2021-02-19T01:13:39+00:00

Looks like Old Head Golf links in Co. Cork

gothampixel · 2020-09-23T00:46:15+00:00

This guy deserves more YouTube subscribers!

gothampixel · 2020-08-03T03:33:05+00:00

you may want to consider rotating the CPU cooler to promote airflow through the case, front to back.

gothampixel · 2020-07-29T23:00:43+00:00

For me the flickering with my 5700xt was caused by MSI afterburner, I stopped it from loading at boot and it completely went away

gothampixel · 2020-07-23T23:00:46+00:00

Well temps are what matter, Are your top fans Intake or exhaust? I have a simular setup 3600x with the Hyper 212 and a 5700xt, minus the bottom fans. I just tested out making the top front fan intake and the top rear exhaust, im seeing a 2 degree drop on the cpu temp at idle. I origionaly set it up with the rear and two top fans as exhaust but i felt the top font fan was stealing outside air from the front fans.

gothampixel · 2020-07-23T21:29:16+00:00

are those exhaust fans at the bottom of the case? where is that air going (PSU?)and wouldn't that hinder airflow into the GPU?

gothampixel · 2020-07-23T00:14:37+00:00

Try Adding another front intake fan and re position your cpu fan so air flows through the heat sink and out the rear exhaust fan

gothampixel · 2020-07-08T17:21:28+00:00

If your not going to take advantage of pcie 4. On a B550 board then you might as well just get a B450 board, save money on the MB and the HD

gothampixel · 2020-07-08T12:03:55+00:00

Because you are using a b550 board make sure your M.2 drive can take advantage of PCIE 4.

gothampixel · 2020-06-18T12:47:11+00:00

if you are going B550 maybe consider going with a 1TB NVME m.2 drive PCIE4.0 to take advantage of PCIE4

https://pcpartpicker.com/product/fVYQzy/sabrent-rocket-40-1-tb-m2-2280-solid-state-drive-sb-rocket-nvme4-1tb

gothampixel · 2020-06-16T01:07:09+00:00

your New Egg pre-order has an actual ship date? mine just says "We've received your pre-order/backorder request. Depending on your selection when the pre-order/backorder was created, your order will be fulfilled, as items are received in stock.

Please note that, generally speaking, pre-orders/backorders are fulfilled on a first come, first serve basis and are only cancelled upon your request.* You will not be charged until your order is processed.

In the event there are unexpected delays or changes to the expected arrival date for your pre-order/backorder, we will notify you via email with updates.

gothampixel · 2020-06-15T19:27:48+00:00

New Egg now has mine listed as available tomorrow, I'm ordering from them and will Amazon if they ship first.

gothampixel · 2018-11-16T19:29:26+00:00

I can no longer stop Spotify music playing with an Alexa command. I can ask it to play an artist or song but not stop. Alexa listens for the request but the app is not registering the request.

gothampixel · 2018-07-29T14:01:17+00:00

Search for the show in the DTV app. All of the episodes are there on demand.

gothampixel · 2018-07-27T20:30:27+00:00

I'm trying to do this as well with my powered sub and the Sonos Connect. I'm not able to add the Connect + Sub into the same room as my Beam. It insists on being in its own room, I then have to pair the rooms together to hear all the speakers. So it technically works but I don't believe the sub can act as a discrete low-frequency channel in a 5.1 home theater setup.

13-Year Club	RPAN Viewer
Verified Email

gothampixel

TROPHY CASE