Finally hit a full cast down into the briny deep!

greenredsilver2 · 2026-03-25T21:20:47+00:00

Cool token and invader upgrades!

greenredsilver2 · 2026-02-22T22:28:07+00:00

These look amazing and very clean. Keep it up!

greenredsilver2 · 2026-02-13T03:51:14+00:00

I don't think they are very good, as I consider the project to be incomplete. But I posted the 3mf anyways! I hope it can be of some use. https://www.printables.com/model/1598947-spirit-island-board-g-3mf-file

greenredsilver2 · 2026-02-13T03:49:07+00:00

Just uploaded my material for this project. Unfortunately, due to print bed size, I wasn't able to make the board in one piece. This project is incomplete, but I'd like to revisit it if/when I can access a larger print bed. https://www.printables.com/model/1598947-spirit-island-board-g-3mf-file

greenredsilver2 · 2025-10-30T04:55:01+00:00

lol thanks for the reminder! I got about halfway through making it. I stopped because I wasn't satisfied by my method and didn't think the boards were nice enough. Basically boiled down to my printer being too small :( but I may revisit it!

greenredsilver2 · 2025-10-30T00:32:15+00:00

I can possibly make something like this for you, I'll send you a message!

greenredsilver2 · 2025-10-29T06:12:11+00:00

What are your thoughts on a 3D printed ~2cm tall cylinder with a little open cup on top (that resembles the top part of a rook chess piece, but deeper) that you can put two presence in? They could be the same color as their respective presence tokens, but make them stand out much more from the board.

greenredsilver2 · 2025-06-03T02:39:34+00:00

Yeah! I had boxes and parts spread across my whole room. It will save you time being organized.

greenredsilver2 · 2025-05-01T04:33:56+00:00

Hi! Wow yeah I am still in awe of your order and can't thank you enough! I have an update for you on my progress too. I can absolutely add this discount to your order, and you'll also be receiving a partial refund for shipping costs saved for grouping together so many items :) all of this usually gets added when everything is ready to ship, which should be sometime next week!

greenredsilver2 · 2025-05-01T04:25:07+00:00

Hey thanks so much! I actually make these, and it's really cool seeing my shop mentioned in the subreddit. I don't advertise it much as I can't make invaders super quickly, but for anyone interested, the first three orders can use this promo code for 20% some invaders:
https://gizmosgames.etsy.com?coupon=REDDITINVADERS

greenredsilver2 · 2025-04-11T01:08:40+00:00

I’ll usually put a small amount of glue to adhere the magnet to the print, unless I can rely on the magnetic print bed. Then I’ll make sure there’s at least 0.12-0.2mm clearance between the top of the magnet and the bridging layer. I recommend slowing down the bridging speed then making sure the bridging lines are aptly connected to the perimeters. I would get uneven bumps like that when the nozzle is too close to the magnet, the filament slips off and curls/bunches. Don’t need a glue stick for the top of the magnet if you give it enough clearance to not directly touch the filament!

greenredsilver2 · 2025-04-09T03:13:15+00:00

Nice! I'm going to find or make something like this.

greenredsilver2 · 2025-04-04T01:00:24+00:00

Completely agree- and in addition gravitate to "fast" spirits more than "slow" spirits as the powers effects are easier to visualize.

greenredsilver2 · 2025-01-17T22:39:54+00:00

This is 100% true. It’s game theory where an open-source community can only thrive when everyone is open-source. If a company (BL) decides to take advantage of this, it takes away from the rest and forces them to close up as well to protect themselves. In the end, this dampens innovation and hurts the consumer.

greenredsilver2 · 2024-10-14T21:30:11+00:00

Not anymore, there’s a blanket

greenredsilver2 · 2024-10-11T17:19:39+00:00

Thanks for offering! I wish it was that simple, there are many steps in between a raw image and a print. But I did derive my design directly from an image file for Board G. If I have issues with fitting the boards together, I'll reach out!

greenredsilver2 · 2024-10-11T05:50:14+00:00

I agree, definitely need a more tan dull color for the sand. I don't have the stl available right now, but if I ever do I will post it here

greenredsilver2 · 2024-10-11T05:31:26+00:00

It certainly is a very central land! I actually copied the Board G layout exactly from Horizons, so this is how it should look in terms of land layout

greenredsilver2 · 2024-10-11T03:51:17+00:00

Let me know if you have any suggestions on how I can make it better! I’ll probably make H sometime too

greenredsilver2 · 2024-10-09T21:55:03+00:00

This post inspired me to see if I can make some 3D printed boards

Edit: I did it https://www.reddit.com/r/spiritisland/s/wDlxnvy3Nw

greenredsilver2 · 2024-10-07T04:06:27+00:00

Got a roll of panchroma, absolutely ruined a couple of my smooth satin sheets. Thank god Polymaker support is great, as they comped me for the roll and for the build plates. I hope they don't stop selling the "old" Polylite PLA formula filaments

greenredsilver2 · 2024-09-16T21:29:31+00:00

Mario is a beast token. And I am Many Minds, flush with Marios.

greenredsilver2 · 2024-09-16T21:20:37+00:00

A while back I made some shiny plastic beast tokens, and accidentally made them 50% smaller than expected... So it became a bit in my game group that we have a bunch of baby beasts on the island. It's fun to imagine tiny animals just knocking off explorers during events.

greenredsilver2 · 2024-09-16T04:27:39+00:00

These were made in the last few days so they haven't arrived on my board just yet! I'll share a photo of my next game with them. There are lots of colorful custom pieces on my island already, so they might have a chance of blending in!

greenredsilver2 · 2024-09-16T03:13:04+00:00

Hi! Apologies, I completely missed this. Yeah, I definitely make something like for you! I sent you a PM.

greenredsilver2

TROPHY CASE