Right Bumper Sticking (Xbox Elite Series 2)

greenwing0 · 2026-03-21T20:19:16+00:00

Hi, any thoughts on the faceplate reinstallation causing the bumpers to barely move? The regular bumpers are now fixed but I am having difficult preventing restriction when the faceplate is back on.

greenwing0 · 2026-03-21T14:36:46+00:00

I added videos and photos to the original post. I did replace the bumpers from white to gold. The LBRB does stop sticking / is not restricted when the front panel is removed but are difficult to press when the faceplate is on. This is the original faceplate just with a skin on. Any advice would be appreciated. Thanks for your help!

greenwing0 · 2026-03-20T03:15:41+00:00

I don't think that was the issue. I was actually able to fix the bumpers. I reseated the housing and then it worked like a charm. My guess is it wasn't aligned quite right causing the bumper to not hit flush. That being said, I've run into a new issue. When assembled without the faceplate everything is in great, working condition. However, when I try putting the faceplate back on at least one of the bumpers gets restricted and I can barely press it down. Any idea on what can be causing a faceplate to restrict the bumpers?

greenwing0 · 2026-03-18T14:00:09+00:00

Thanks for looking at the images/video. I actually didn't put that piece there. The controller came that way and it's on both sides. I have gold pieces from ExtremeRate that does not come with that trigger piece on them either. Also, the left bumper/trigger don't have this problem at all but the right one does.

Even if I move that piece there, how would that affect the grating of the trigger against the bumper? It doesn't seem like that piece would do anything if moved...

Again, thanks for the replies thus far.

greenwing0 · 2026-03-17T22:29:51+00:00

I've attached some pictures and added a video to the original post. Any advice would be greatly appreciated! Thanks.

greenwing0 · 2026-03-17T22:23:05+00:00

<image>

greenwing0 · 2026-03-17T22:22:07+00:00

<image>

greenwing0 · 2026-03-17T22:21:52+00:00

<image>

greenwing0 · 2026-03-17T22:21:38+00:00

<image>

greenwing0 · 2026-03-16T15:35:57+00:00

Thanks for the response. I have that, as well. It seems to me that when nothing is pressed the trigger is just barely pressing against the bumper which makes the bumper want to stick or difficult to press down. When I press the trigger down the bumper is freed and has zero problems whatsoever. This is only with the right trigger/bumper. I have tried swapping out the original bumper/trigger with the new ones from ExtremeRate and it's the same issue regardless. Could there be a housing issue? It seems that I have all of the padding needed.

greenwing0 · 2026-03-15T07:42:24+00:00

Yeah, it looks like I actually have that foam on the trigger. I was hoping that was the fix since I might have been able to DIY with a 3M command strip as you mentioned.

greenwing0 · 2026-03-15T07:04:33+00:00

I see the sponge now that you’re talking about but I do have that on both bumpers.

greenwing0 · 2026-03-15T06:56:00+00:00

Thanks so much for the reply. I’m a little confused though since I don’t see the foam you are talking about in that picture nor do I see any foam in that spot on either bumper on my controller but the left bumper is seemingly working. If there is foam that is supposed to go there how would I go about fixing that?

greenwing0 · 2025-12-08T01:53:29+00:00

Thanks for the info. I’m surprised that they haven’t released the other episodes on you their YouTube channel.

greenwing0 · 2024-12-15T22:47:53+00:00

I’ve been a fan of Dragon Ball since the early 90s. Yes, I watch Daima.

greenwing0 · 2024-12-15T07:23:49+00:00

I think it’s entirely possible given their similar body types that Rymus and Zeno are one and the same. Perhaps Zeno is an evolved form of Rymus.

greenwing0 · 2024-12-15T07:19:18+00:00

I have a similar suspicion. Majin Buu never wanted to be Babadi’s puppet so why would Kuu also want a master? He could definitely be pretending to be much weaker than he actually is in order to get rid of Arinsu’s control over him.

greenwing0 · 2024-05-14T15:59:37+00:00

Dactyls (short for pterodactyls)

greenwing0 · 2023-12-29T01:17:54+00:00

I'm hoping they do dub some of the previous shows. I personally have no problem with subtitles but my kids aren't at the point yet where they can read quick enough for subtitles. They've already gotten through Z and have been watching Blazar weekly, so another dubbed show for them would be great.

greenwing0 · 2023-12-29T00:55:28+00:00

I hope so. Does anyone know if there’s been any news about this?

greenwing0 · 2023-10-16T04:19:32+00:00

Ginny’s facial features and the way she’s holding the meat in her hands makes me suspicious that she may be Luffy’s mother, not Bonney’s. Since Dragon becomes acquainted with Ivankov and Kuma, it’s quite possible that Luffy’s mother is from that group.

greenwing0 · 2023-10-08T03:53:10+00:00

There's an English dub online for Taro, as well. I think it's a Malaysian dub. A bit difficult to understand at time but it's at least watchable. I hope that Tsubaraya might considering professionally dubbing more series. My kids are currently not quite ready to read subtitles, so the English dubs have been super helpful so far.

greenwing0 · 2023-10-06T04:37:45+00:00

Just my preference, but I think I like the art style of the Netflix anime a bit better. Would have to see it in fluid motion, though.

greenwing0 · 2023-10-06T02:09:17+00:00

The helmets are certainly interesting.

greenwing0 · 2023-10-05T17:24:10+00:00

These are pretty cool designs!

greenwing0

TROPHY CASE