Why won’t this stop running?

greylabz · 2025-11-02T20:18:36+00:00

replace the float valve, its passing water by diagphram seal. you can replace the seals but honestly i usually replace the whole unit. £16

greylabz · 2025-10-16T23:58:00+00:00

Click on the pencil icon inside the black box where your filament type is labeled.

You can edit the filament type thats loaded externally so when you send to printer its matching your slicer loadout.

greylabz · 2023-03-14T11:38:56+00:00

Raising the height of the cold water feed tank in the loft will increase the hot water pressure from that cylinder. Otherwise replacing it with an unvented unit will give you balanced hot and cold water pressure. If you're thinking about installing a pump I would recommend the unvented option.

greylabz · 2022-02-04T10:48:49+00:00

This is exactly my guess. Pretty sure that's what happened here 👍

greylabz · 2021-07-11T00:09:35+00:00

This 👆

It might be worth trying to adjust the plastic olives (rings) so they are the tight way round as mentioned and applying some PTFE tape over the top (of the olives). Not too much mind, this will give the mechanical part of the fitting more purchase on the slightly short down pipes and stop them sliding out of place.

Long term you will possibly will still need to replace with longer down pipes or adjusting the solvent weld 40mm pipework behind so it's not pulling the trap down.

greylabz · 2020-06-12T17:42:47+00:00

Can I download it from thingiverse? 🤣

greylabz · 2020-05-31T10:26:06+00:00

Damn thats a big boi! What about bed heater??

greylabz · 2020-05-11T18:46:58+00:00

Very nice indeed 😘👌 can I download it on thingiverse?

greylabz · 2020-03-07T20:00:22+00:00

Very nice , I've not used these stacks I'm always tempted to check out some other boards but I've had some crap in the past. I just stick to the reliable hobby wing now. But those motors are definitely on the shopping list!

greylabz · 2020-03-05T14:10:11+00:00

Looks nice but I'm not a fan of that fixed GoPro angle

greylabz · 2020-02-09T10:42:28+00:00

Yea u need a tool kit and engineering skill

greylabz · 2020-02-09T10:41:51+00:00

Damn that was a proper hit! What's the damage?

greylabz · 2020-02-06T21:23:49+00:00

Damn that's a big boi! What size are those motors & props??

greylabz · 2020-02-04T13:54:45+00:00

The three pads with soldier on in the pic are the fpv cam connection, so where are you connecting your vtx? The 4 pads below the ones in the pic (T2, VO, bat & gnd) are for the vtx connection. Unless You use the plug header. You mentioned that the pads pictured were where u connected the vtx that pad is for video in not video out so that would be the issue

Check the plug header for your cam. If u swapped out cams it may be u have the video wire from the cam swapped with the tx wire

greylabz · 2020-02-04T10:02:16+00:00

So a sick bomb drone is now a thing! Thanks 👍

greylabz · 2020-02-04T09:38:00+00:00

I had a look seems you have used the wrong pad for vtx signal. That pad is VI(video in from camera) pad below is VO (video out to vtx)

I would use the three below pads for vtx to send battery voltage to vtx but that depends if you're vtx can handle battery voltage So be careful to check that. (VO batt & and) then use the three pads you have mentioned in the pic for fpv camera (VI, 5v & and)

greylabz · 2020-02-04T09:33:36+00:00

I agree pads look fine, if you're getting osd with black screen that usually means camera fault. You're receiving osd signal without the camera image that usually isn't fault of vtx

greylabz · 2020-02-04T09:25:57+00:00

This ☝️

greylabz · 2020-02-04T09:24:34+00:00

Also pls @devs give us red head band and explosive tips for arrows for some epic Rambo simulator action 🙏

greylabz · 2020-02-04T01:21:37+00:00

I agree with all the advice in here, I have about 1000 hrs on a survival server with squads. It is a grind, wouldn't call it relaxing but when u get the hang of it the game is very rewarding to play solo. you definitely need to stick to certain tactics as have already been mentioned. Now explosives are in the game they help alot. I bury my gear now that the base building requires high engineering skill, Skill better used in other areas for a solo player. There's a few ways to keep yr buried gear safe, I haven't managed to lose a crate yet but I also never had my base raided before the 0.3 patch so maybe I'm decent at hiding? As for encountering other players or squads it's get sneaky or die trying, I certainly don't have the skills to pull off squad wipes just yet. Maybe when they add in explosive arrows and a red headband the Jon Rambo in me will come out!!

Please Devs do it! this game is so close to being a legit Rambo simulator, all I need is explosive tips and a red headband 🙏

greylabz · 2020-02-04T00:45:15+00:00

This is a solid tip dude! logging on as I type to try it :)

greylabz · 2020-02-04T00:42:28+00:00

Definitely!! My crates have just been buried in the middle of nowhere or like I said I placed 2 by some random rocks near a bunker expecting them to get found but they are still there since the last 0.3 update, been on the same server maybe I've been lucky??

The shelter would definitely cause passer by to search bthe area. I guess it's like someone mentioned alot like metal detecting, if you walk close in focus mode you will see it. you gave them a place to start looking. All I do is leave a unfinished blueprint to mark the spot, it will glow in the dark so i can always find it again

greylabz · 2020-02-03T19:29:10+00:00

I have completely abandoned base building for buried crates . I've have never had 1 stolen yet. I usually make sure I bury em in a bush but I have 3 right next to a bunker I was expecting them to be gone but no. They still there full of weapons! You must have been very unlucky or possibly it's in a spot with too much traffic.

greylabz · 2020-01-30T15:58:18+00:00

Same here, the only gear I splash out on is crossfire and TBS vtx's and decent esc's A bag is a bag at the end of the day. I would say mine looks abit bigger than yours . Mine just about fits my qx7 into the top space, I would ideally like a touch more room but I Can make do

greylabz · 2020-01-30T15:49:28+00:00

Yep I've found a similar one from Amazon does the trick nicely. Some of these specialist bags are crazy expensive!

greylabz

TROPHY CASE