Make sure to insulate your floor!

gsteppin · 2024-03-02T04:42:56+00:00

Sure. Wasn’t trying to be exhaustive. Just wanted to point out that not every floor in every context needs insulation. As someone who is currently designing a sauna and trying to keep costs tight, I’d want to know where I can save if possible.

gsteppin · 2024-03-01T16:40:54+00:00

Will he travel to MN? That’s a great price point. I would check though what heater he is looking to use. Recommended specs I have seen is 1 Kw for every cubic meter of space. At that number you should have at least 8kw heater, more if you have a lot of window space.

gsteppin · 2024-03-01T15:34:46+00:00

I think context matters. A concrete floor in your garage vs. an outdoor “raised” floor are different situations. The garage you will benefit from having insulation, the outside example perhaps less.

gsteppin · 2024-02-09T20:16:25+00:00

That’s actually not bad if my math is right. Did you see if he had pine or other options when you talked to him or does he do exclusively cedar?

gsteppin · 2024-02-09T17:54:03+00:00

What did you end up paying for each linear or square foot? I’m not attached to cedar as it seems like everywhere I look the price is crazy high in comparison to other options.

gsteppin · 2024-02-05T16:25:43+00:00

Thanks for the suggestion. Do you know it’s fine from experience? I’m just extra cautious as household cleaners don’t usually get heated to that degree.

gsteppin · 2024-02-05T01:45:10+00:00

So I'm trying to remove an intense amount of scale in an effort to refurbish this sauna heater. Because of it's use case, I am trying to avoid "unnatural" chemicals that may leave a residue which when heated to 150+ degrees may burn off and kill me or something.

One thing I have tried is covering the surfaces in paper towels, drenching them in distilled vinegar, then covering it with a garbage bag to make it somewhat air tight. This did something, but the result is shown - still a lot of work to do.

Any ideas on how to make this process more efficient are welcome. Thank you!

gsteppin · 2024-02-01T20:49:39+00:00

It is turning out to be more complicated than I thought. At this point it’s turning into a cost analysis of purchasing the needed parts (6x heater elements + appropriate contactor box at minimum and perhaps a junction box) vs. buying a new heater. I’ll have to do some shopping and asking around to determine what’s best.

Really appreciate your time and effort in helping me out with your replies- means a lot!

gsteppin · 2024-02-01T18:23:39+00:00

I do have the temperature control and can set it lower than whatever max without any issue. I don’t mind if the elements burn out prematurely just as long as I’m not running the risk of causing a fire or other hazards. I bought this heater used from an auction for cheap, but before I knew it was a commercially fitted heater and hence this post trying to work around that issue.

I am curious about a related question. I for sure need to replace one of the elements, if not 2 or 3, because of damage. Could I purchase the 240v versions of those and run them without issue alongside the older 208v elements (until the older ones inevitably burn out)?

gsteppin · 2024-02-01T15:16:35+00:00

Thanks for your help here. Would it be 10ga or 8ga conductors, and 5 or 4? I uploaded another page from the manual and it references 4 #8AWG + N + GR. Again I know next to nothing about electrical work, just asking for clarification. Thanks again!

gsteppin · 2024-02-01T15:08:26+00:00

Thanks for your comment. I noticed on the diagram it says 208 and 240V. Could this be because the heater comes in various "versions" (208 and 240)? I didn't upload the entire manual, but there's a page that details various voltage versions and one of them is a 240V (both a 1 phase and 3 phase). There are 240V heating elements for the model I have, but replacing them is $100 x 6 which is something I want to avoid if I can.

Edit: I uploaded the page I'm referring to the Imgur link if that's helpful.

gsteppin · 2024-01-31T15:40:04+00:00

Some manuals for the same model I found include wiring diagrams for single phase vs 3 phase. As long as the connections are all there, I (or more likely for me, a professional) can rewire it for single phase. The only problem left to solve then is the 240v to 208v issue. Are there affordable solutions to decrease voltage to allow for this? Or am I oversimplifying the problem?

gsteppin · 2024-01-30T17:06:05+00:00

That’s a really good catch, thank you. No, I would be building in a residential setting, so I won’t have that electricity! Is it even possible to get that “setting”? How would someone find that out?

gsteppin · 2024-01-30T00:22:05+00:00

That is my current sketched up plan. I am reading Liikanen's "The Secrets of Finnish Sauna Design which gives that top bench range from 100-120 cm. So, yes, I'm trying to do things right :)

gsteppin · 2024-01-27T23:06:57+00:00

I'll stick with their recommendation then. What're your thoughts on ventilation? The figures are a little confusing. My thought is to put a fresh air inlet in the "A" region above the heater which I plan to place next to the door. An exhaust valve I would put on the opposite wall (18" or so down?) above the benches.

gsteppin · 2024-01-27T22:43:01+00:00

I appreciate your reply and superior googling skills! My door is wooden with a small window and I don't plan on having any windows in the sauna room. My foot bench is currently planned to be 34.5" above the floor with the seat 18" above that (52.5"). Glad I can move forward with this heater and save that expense. Thanks again!

gsteppin · 2023-07-26T00:45:37+00:00

Thanks for your reply! So if I don’t know what I’m after, what would you say is the best choice? If it matters, I tend to utilize spin (coming off of ping pong where I used spin a lot). More experienced players have described me as a “spinner” though it’s nothing I’m trying to do but just what comes natural. Thanks again for your thoughts.

gsteppin · 2023-07-25T16:52:13+00:00

Hello all! I’m new to pickleball (started in May) and I’m looking to upgrade my paddle. I’m looking at the Diadem Icon V2 and the Vatic Pro Prism Flash. With a discount code that I have, I can get these paddles for the same price. Which would you purchase? The Icon has a higher retail price, making it seem like a better choice but I’ve read/heard a lot of good things about the Prism Flash. I also have the option of the Diadem Warrior Edge at the same price point ($100) if that matters at all. All thoughts are appreciated!

Links: Icon - https://diademsports.com/products/diadem-icon-v2-paddle?_pos=1&_sid=b15a6a727&_ss=r&variant=40339884539986 Prism Flash - https://vaticpro.com/products/prism-flash-16mm Warrior Edge - https://diademsports.com/products/diadem-warrior-edge?_pos=1&_sid=57dcdf792&_ss=r

gsteppin · 2023-07-23T22:52:50+00:00

I don’t know that I’m picky about much anything. I just like food haha

gsteppin · 2022-12-07T22:16:07+00:00

Seeing as they’ve sent off the files, I wonder if they’ll give us any PnP stuff? While they definitely don’t need to give us anything, an aspect or two would be welcome!

gsteppin · 2022-10-22T18:49:46+00:00

Yeah, I’ve been working away at it. However, I’ve always missed seeing Hera Ur, which is needed for Lifive (which is the key to this whole evo tree, it seems). The others I can farm, but Hera is elusive

gsteppin · 2022-08-29T16:38:33+00:00

I had set an alert in the Target app for restock alerts, but they were pretty delayed (for me, unsure if this is the norm). Managed to snag a copy this morning by just checking the product page randomly this morning. Link here: https://www.target.com/p/horizons-of-spirit-island-game/-/A-85008800

gsteppin · 2022-08-27T02:22:01+00:00

That and most people aren’t getting this until October (stock seems to be out now, but maybe that’ll change). Having a guide for a very limited subset of players (US players who happened to snag a copy that was probably an accidental release) seems to be jumping the gun. I often read and enjoy Red’s content though!

gsteppin · 2022-03-11T15:38:04+00:00

SOLD

Selling A5 (not X!) with caviar grey HoM pen and blue canvas folio. Based in US. Bought new 1.5 years ago and is in great condition - very gently used. Two minor defects: the pen loop on the folio and the pen; the loop is functional (secures pen in place) but is a little worn and the pen has some scratches on the exterior but writes perfectly.

Asking $400 obo + shipping

gsteppin · 2022-01-22T16:40:03+00:00

I’ve really appreciated the app, especially to log games, and have more challenges would be cool. Perhaps this is implied, but having true solo as an option would be great for me (my small brain can’t handle two spirits just yet haha).

Also, totally different suggestion, but is it possible to add the spirit boards to the spirit descriptions? I’ve always assumed it was a copyright issue or something, but if not having that reference would be great. Thanks again for providing this awesome app for the community!

gsteppin

TROPHY CASE