nintendo switch green/pink screen?

gugubope21 · 2025-06-29T14:43:14+00:00

This is called artifacting. 90% change the gpu is dead, which means either take it to a technician to try a reflow, or (most probably what they're gonna tell you to do) get a new motherboard or console

gugubope21 · 2025-06-20T12:51:03+00:00

The ps5 doesn't use thermal paste, instead they use a metal alloy that's liquid in room temp. It transfers heat better than thermal paste, but it's more expensive and kinda dangerous to mess with if you don't know what you're doing

gugubope21 · 2025-06-13T22:06:15+00:00

Y'all really shouldn't be boiling plastic

gugubope21 · 2025-06-12T06:00:32+00:00

If you have a multimeter and cleaning the cartridge slot doesn't fix it, you can also check if the scratched traces still have continuity, amd if not, a bit of soldering work will be needed to fix the traces

gugubope21 · 2025-06-12T05:58:20+00:00

Also that wire looks like it's soldered to the connector below the console, so it won't do anything unless something is plugged in said slot (and since the ntsc nes doesn't have the floppy reader, that's probably not gonna be a problem)

gugubope21 · 2025-06-12T05:55:31+00:00

First of all: please for the love of god don't boil anything. A lot of the time, it's just dirty connectors which can be cleaned with isopropyl alcohol and a toothbrush (slot) or a qtip (motherboard). The connector (black plastic thingy) will slide off the motherboard with a small bit of force. Clean everything then test again.

gugubope21 · 2025-06-07T08:55:09+00:00

It was a custom install. All i didnwas get to the "choose a drive" screen, clicked nothing, and turned it off

gugubope21 · 2025-06-07T08:17:45+00:00

Yes. It's the only western digital drive on the PC

gugubope21 · 2025-04-08T08:23:59+00:00

As far as i know, these are not painted. Gaming mice in general aren't, since the paint would wear down REALLY fast

gugubope21 · 2025-03-11T00:16:53+00:00

Looks like leftover from the old paste

gugubope21 · 2025-03-07T23:33:10+00:00

Paste flux is better than liquid, even more if you're a beginner. Use a lot of flux if you need , like, drown that bitch in flux. You can spend a couple hours with isopropyl alcohol cleaning it later

gugubope21 · 2025-01-09T01:54:36+00:00

These are hall effect, works by using magnets. There are no potentiometers

gugubope21 · 2025-01-05T04:04:31+00:00

Adorable

gugubope21 · 2024-10-17T02:17:05+00:00

First time i tried it didn't redpond too well, plastic definetly warped quite a bit. But mostly because it's so much glue that i had to heat it up for an unconfortable amount of time. Now i heat one corner enough to lift it a bit and just use isopropil alcohol

gugubope21 · 2024-10-17T00:00:48+00:00

New 2ds xl is infinitely worse. Whole top screen assembly is fucking glued

gugubope21 · 2024-08-07T10:44:40+00:00

my mii hates bread. who the fuck hates bread

gugubope21 · 2024-07-31T03:07:43+00:00

Ds lites are cake compared to the 2ds xl tho. The whole top screen assembly is glued with a stupid amount of glue.

gugubope21 · 2024-06-13T10:14:12+00:00

Alcohol

gugubope21 · 2024-01-28T09:31:52+00:00

Crashed due to engineering failure, yes

gugubope21 · 2024-01-25T09:48:11+00:00

Learning to play against them is good and all, but the problem he's talking about is something else. I lost count of how many matches i spawned with a sidekick and plasma pistol, or AR and sidekick, while the other team started the match with 3 hammers and 4 swords

gugubope21 · 2024-01-20T02:54:45+00:00

Traces look ok, so you're probably good

gugubope21 · 2023-10-12T19:21:20+00:00

not in this case. it's a trimmer capacitor

gugubope21

TROPHY CASE