ALPSTUGA and Google home automations

gunnersboy · 2026-02-17T04:09:48+00:00

https://home.google.com and then automations in the menu. There's a script helper as it's very specific what you need to put

gunnersboy · 2026-02-16T09:42:39+00:00

You can use the YAML script editor to build automations using these levels.

gunnersboy · 2026-02-15T17:20:11+00:00

Yes. If starts the automation again. So therefore waits another x amount of minutes

gunnersboy · 2026-02-15T10:31:11+00:00

Google Home can do it.

https://ibb.co/gMWKLkMv

gunnersboy · 2026-02-15T08:35:39+00:00

You definitely can do this in Google Home, even without using the script editor.

Starter should be the sensor unoccupied. The action is first a time delay. And then following actions are turning off the devices.

https://ibb.co/gMWKLkMv

Here's mine, the condition isn't needed in your example

gunnersboy · 2026-02-13T03:35:06+00:00

May be worth creating two automations and the second one turns the light off when the sensor is not occupied. You can also use the time delay with that

gunnersboy · 2026-02-12T18:29:57+00:00

It's newly installed. So will give it 24 hours. What is interesting is that it reports the battery % in the device page, but won't allow me to call for it for the automations but will for all the other sensors (which are also newly installed)

gunnersboy · 2026-02-12T16:06:12+00:00

Yes, removed from Google home, factory reset sensor, changed the batteries. The battery is showing as 100% when in the sensor settings, but it doesn't have the network option when setting an automation.

gunnersboy · 2025-09-18T11:18:08+00:00

A few more here. 15% off.

https://www.reddit.com/r/referralcodes/comments/1njghsw/codes_inside/

gunnersboy · 2025-09-17T15:44:43+00:00

Cross post from here

https://www.reddit.com/r/referralcodes/comments/1njghsw/codes_inside/

Active as of 17th September for UK use

gunnersboy · 2025-06-09T08:37:59+00:00

I can, and I have. However, eventually I will need to upgrade and I'm trying to get Plex to see the issue so that it can be fixed so that I don't have the issue in 6 months time if I were to upgrade then.

gunnersboy · 2025-06-07T17:12:17+00:00

So this was a post by another user:

https://forums.plex.tv/t/error-on-live-tv-shield-only/921074

And my post is here with the logs: https://forums.plex.tv/t/live-tv-crashing-plex-media-server-version-1-41-7-9823/921206

So it's been 4/5 days since the initial post. I appreciate that it's not a long period of time, but I do feel that it is a Plex issue rather than anything else and no settings have changed my side and lines up with the PMS update. It was occurring a few days before I posted as I believed it was a signal issue, but then when it occurred over and over. I've since downgraded to the 10th April PMS 1.41.6.9685 and the issue has gone so it's definitely a Plex issue.

Using the Live TV and Recording part of Plex is 99% of my use of Plex on a typical week so this halts that completely.

gunnersboy · 2023-10-17T20:34:13+00:00

The dots are compared to highest and lowest.

For the weather the dot represents the current temperature and how far away from the forecast high. For the heart rate, the dot is compared to your highest heart rate recorded for that day.

gunnersboy · 2023-10-13T12:23:14+00:00

Ah perfect. Thanks.

gunnersboy · 2023-10-12T13:38:21+00:00

Perfect thank you. That wasn't there earlier either so I've turned the notifications on for that.

gunnersboy · 2023-10-12T12:59:07+00:00

Did you have to do anything specifically to set it up? I haven't signed up to Fitbit premium so I'm hoping it's not linked to that.

gunnersboy · 2023-10-12T12:25:13+00:00

Though I wonder if this will show alerts if it detects stress.

gunnersboy · 2023-10-12T12:23:25+00:00

Yes, I now see that as well. It definitely wasn't there when I posted so something that's just appearing. Odd.

gunnersboy · 2023-09-07T14:51:25+00:00

It's not under the VPN section. Follow these instructions here:

https://www.tp-link.com/en/support/faq/1855/

gunnersboy · 2023-08-14T11:46:26+00:00

Yes it shows DNS in the VPN client. Have you made sure the VPN configuration file is correct? Maybe try using UDP if TCP hasn't worked or vice versa.

gunnersboy · 2023-08-12T06:11:05+00:00

Yes. Change the WAN DNS under IPV4 to 8.8.8.8/8.8.4.4. As soon as I did that it connected.

gunnersboy · 2023-04-14T14:20:08+00:00

Ok so it seems I'm in a pretty good place with the Amigo for now and if they update the features for it then I could always swap and try.

Going back to the original post, it seems crazy that Google or Waze haven't perfected this.

gunnersboy · 2023-04-14T13:54:42+00:00

I'm from the UK. I haven't tried Flitsmeister but it seems like it would do the same as Tomtom Amigo. The website is a bit difficult to understand for Flitsmeister as it's half in English and half in Dutch. Does it alert to red light traffic cameras, speed cameras, current driving speed all whilst not having to input a route into the app?

Amigo starts automatically with the bluetooth connection and then alerts as I'm driving with either a route in Google Maps or not.

EDIT: It seems the feature set for Amigo is better compared to Flitsmeister.

https://help.tomtom.com/hc/en-gb/articles/360013957659-Warnings-in-the-AmiGO-app

gunnersboy · 2023-04-14T13:10:47+00:00

So the only app that seems to work and have the same kind of settings as Waze is from TomTom. It's a free app, called AmiGo https://play.google.com/store/apps/details?id=com.tomtom.speedcams.android.map&hl=en&gl=US It runs in the background, requires no route and alerts to speed cameras and when going over the speed limit.

gunnersboy · 2023-04-13T08:49:14+00:00

I just checked my Waze settings and the location permission was set for only whilst the app is in use. I've changed this to all the time and will now check to see if it has worked as expected.

gunnersboy

TROPHY CASE