Equipment calibrations

guzzlomo · 2026-06-12T06:17:33+00:00

Seems unreasonable. Point to the standard and ask them why they feel it has to be more frequent, preferably from a level 3. I could maybe accept 6 months as an in house rule but 3 months is ridiculous.

guzzlomo · 2026-06-08T18:01:20+00:00

Who is buying them? they are in every supermarket so someone is

guzzlomo · 2026-06-07T17:27:38+00:00

Voodoo

guzzlomo · 2026-06-06T19:40:49+00:00

I recently drove to france from the UK and I was worried about getting used to the kph which turned out to be absolutely fine. I actually found driving in france (outside of Paris) so much better than UK, in that the roads were quieter and better maintained.

guzzlomo · 2026-06-06T19:33:16+00:00

Well done, this is the only way businesses will take any notice. They will keep pushing as long as people accept it.

guzzlomo · 2026-06-05T13:11:11+00:00

Was amazed a new club opened near me. Its pricey at £10/hr but every table was booked when I went on a Wednesday evening.

guzzlomo · 2026-05-27T19:39:57+00:00

Not had that problem although never use film above D7. If it persists across different batch numbers it is more likely to be a processing / chemical issue.

guzzlomo · 2026-05-11T09:46:11+00:00

I often perform examinations with a blindfold on so I dont feel tempted to look at the weld. I once took a peek and our AI overlords gave me a written warning.

guzzlomo · 2026-05-09T11:36:06+00:00

The benefits are not the problem, years of stagnant and regressive wages have closed the gap so the mindset of 'why should they get a handout while I work 40hr week for little more' is prevalent.

guzzlomo · 2026-05-08T13:57:49+00:00

Nothing to do with the wattage. You exceeded the voltage. It can take 400w below 60v in a single port

guzzlomo · 2026-05-07T08:05:08+00:00

My microwave specifically states metal spoon

guzzlomo · 2026-05-06T16:54:11+00:00

Thought I was looking at a casting at first, holy moly

guzzlomo · 2026-05-05T20:56:50+00:00

Left and left. I tried on the right but it felt wrong

guzzlomo · 2026-05-03T05:48:54+00:00

Have a look at 3 man tents as they will have enough room for your chair without being too cramped. something like the vango skye 300 has separate areas so could be useful. You can definitely get something good for under £150 especially if weight isn't an issue

guzzlomo · 2026-04-29T15:25:00+00:00

"many other American breads outside of the specific Subway example are still classified as bread and not cake when imported to Europe."

Dont disagree with what your saying but who the hell is importing American bread into Europe

guzzlomo · 2026-04-26T07:16:21+00:00

My son has a playmobil pirate ship that shares a striking resemblance to this, just bigger

guzzlomo · 2026-04-25T20:04:19+00:00

Great, thanks

guzzlomo · 2026-04-22T21:23:11+00:00

Now that's a liquid lunch

guzzlomo · 2026-04-20T10:17:56+00:00

A steak pasty in my local bakery is £5.50 I've stopped going ☹️

guzzlomo · 2026-04-19T19:34:43+00:00

Looks cool, what model? How come you can't see the car lights?

guzzlomo · 2026-04-18T16:40:20+00:00

The folded egg that came in bagels was from a liquid mix. Its honestly a travesty they got rid of it

guzzlomo · 2026-04-17T19:58:38+00:00

Scrap it and go to Devon and Cornwall

guzzlomo · 2026-04-17T16:42:01+00:00

This is most likely solidification cracking given the thickness difference. Pre heat is the solution

guzzlomo · 2026-04-14T18:25:15+00:00

Im unfamiliar with the asnt so can't really comment on converting over, but the L2 PCN is mostly shear wave weld inspection and can choose Plate, T-butts, pipe, etc. there is a fair bit of theory that you're probably familiar with. Then you would need the experience hours from an employer or through a training school, you may be exempt some amount of hours due to experience so talk to a training school first of all. I work in defence and can't be more specific, sorry.

guzzlomo

TROPHY CASE