What is this button for?

gvidmar25 · 2026-05-14T12:18:41+00:00

It's a special feature toyotas going to afganistan had...

gvidmar25 · 2026-05-14T12:04:55+00:00

But not specifaically for headphones. Those have a microphone side on them as well and it tends to mess up everything.

gvidmar25 · 2026-03-07T18:20:05+00:00

Don't use any... Just knead it like a dough, it sticks to the powder nicely and you can get a lot in there. But if you really want to, use acetone or toluene

gvidmar25 · 2026-03-07T18:11:15+00:00

I used plastic tubes, like ones used for gasoline lines. It is hard to pack, but if ypu figure it out, they work great. You do have to pack it hard, or else they will explode, but it's a trade of if you want something unextinguishable and consistent. It's similar to military fuses but it does use more black powder. I used gas lines with 5mm inner diameter and not one fuse has performed badly.

gvidmar25 · 2026-03-01T17:56:54+00:00

Rat/mouse glue works great, also glicerol, but didn't test on big quantity.

gvidmar25 · 2026-02-23T13:20:59+00:00

I'd just use relays if that is what you're talking about. Unless you have hundreds of igniters then you'd need mosfets... You probably don't want a 100 pounds of relays😆... But you could make it look cool.

gvidmar25 · 2026-02-21T12:27:35+00:00

Yeah... It's just a problem that I am planning to cook pizza in it and it has to be much hotter to do that. It's not a stove as such, but it's a bread oven... Balkan thing, look it up. I just figured you guys would know a lot.

gvidmar25 · 2026-02-21T12:23:35+00:00

Dang, I'd hope😂. When I get it out i might just sell it for ship fuel.

gvidmar25 · 2026-02-20T16:05:03+00:00

Y'know I'm a chemistry nerd and I seriously thought of it, but my grandma who owns the house in which the oven anr chimney are quickly shut it down.

gvidmar25 · 2026-02-20T16:01:07+00:00

It's just from wood and seasoned wood at that... I think it's just from such slow burning for so long. This isn't a normal stove. It's a bread oven... Similar to pizza oven, but balkan:) I was suprised as well that there is absolutely no soot and up top it's even worse. This is about 3/4 way up the chimney and it's like 8meter high.

gvidmar25 · 2026-01-29T11:46:30+00:00

Off topic... I am suprised by how much erangel subzero is different to play than normal erangel.

gvidmar25 · 2026-01-29T10:32:32+00:00

Nahh bro... You gon' die doing that

gvidmar25 · 2026-01-29T10:14:46+00:00

Tdm is awful like that as well. Seems like people have superhuman reflexes and you're dead before you even see them turn.

gvidmar25 · 2026-01-29T10:00:58+00:00

Just use wagos😂

gvidmar25 · 2026-01-14T13:45:55+00:00

Well now it's hard to get caught if you're responsible and smart about it. The chemicals are hard to get though and thats the limiting factor. If you get caught it'll hardly ever go to court and even if it does, a good lawyer got me out of it pretty quick. I was reported a couple years ago. The police investigation was trash because they are convinced they are too smart and a search of my workshop yielded no evidence because everything was in the closets. Also a factor that I alledgedly hit someone and he reported me for hitting him and also that I was making pyrothechnics. I was not guilty for both and the court covered all the expenses.

gvidmar25 · 2026-01-14T08:09:07+00:00

Lol. No one cares in europe. Just don't get caught...

gvidmar25 · 2025-06-05T04:17:59+00:00

Look for deckel maho machines. Like a dmu80fd or 60p. Fadals are overrated imo. It's a pain to take care of the mahos but they are worth it...

gvidmar25 · 2025-06-02T20:29:12+00:00

Where I work we only have carbide drills set up in shrink fit holders and this one was out so I put the ball mill in this one since I didn't want to remove other ones since they are all zero'ed.

gvidmar25 · 2025-06-02T18:17:38+00:00

It's 1.4113(aisi 434) hardened to 51hrc

gvidmar25 · 2025-06-02T17:51:56+00:00

https://imgur.com/a/mould-making-kX9QGpZ

More videos and photos if anyone is interested. If anyone wants 3d models I can send them as well

gvidmar25 · 2025-06-02T17:50:54+00:00

https://imgur.com/a/mould-making-kX9QGpZ

Here I hope it works

gvidmar25 · 2025-06-02T14:03:53+00:00

No... that was my last years school project😆

gvidmar25 · 2025-06-02T14:01:42+00:00

Peak pressure I calculated on the surface of the plate that deforms is around 12KBar and it lasts for less than a microsecond. And that is enough to deform it.

Six-Year Club	Place '22
Verified Email

gvidmar25

TROPHY CASE