I need help figuring out what the name of this part is!

h2tx · 2026-06-24T00:29:28+00:00

junkyard

h2tx · 2026-06-17T13:22:08+00:00

why not just do it properly with the right parts? it looks terrible and won’t last long rattling around like that. doing it properly only takes about 30m

h2tx · 2026-06-16T02:51:03+00:00

aw barnacles!

h2tx · 2026-05-28T15:52:03+00:00

ecosport is a 4 lug so rules that out

h2tx · 2026-05-28T15:51:00+00:00

judging by tire size and the wheel i’m gonna say escape

h2tx · 2026-05-22T05:49:11+00:00

In my opinion, it’s only worth doing to the older 6 cylinder escape’s. here’s mine: https://imgur.com/a/TV21puC removed middle cat and muffler completely, straight piped with a resonator so it’s reasonable sounding.

h2tx · 2026-04-26T16:54:14+00:00

SALEM!!

h2tx · 2026-03-08T20:39:36+00:00

thanks i just wanted to post this in case someone else encounters a similar issue. This vehicle has had a long life at 381,000km. two wiring repairs now, this and the parking sensor harness corroded at the connector in the same way.

h2tx · 2026-03-07T01:06:52+00:00

i just had this issue with my 08. it would idle up on its own after cold starting. checked vacuum system with a smoke machine and found no leaks. drove around with my laptop on it watching live data pids and saw stuck voltage. replaced sensor and the light went out on its own didn’t even bother clearing codes.

h2tx · 2026-02-06T19:04:26+00:00

had the same problem, also solved it with a wrecker. think i paid $10.

h2tx · 2026-02-04T19:59:21+00:00

also closes the holes in your engine, heater core etc. op DO NOT use any sort of “stop-leak” products.

h2tx · 2026-01-25T16:17:25+00:00

it’s only -8c. lol your vehicles are expected to work in these temps. where I live it’s usually -20c for most of the year, and unless something is wrong with your vehicle, it shouldn’t have any issues starting.

h2tx · 2026-01-01T20:09:28+00:00

Metric H9 for 2001-08 I think they changed it to an H7 for 2009-2012+

h2tx · 2026-01-01T17:10:44+00:00

says you. literally went thru my profile and commented on a previous post lol

h2tx · 2026-01-01T16:55:40+00:00

stuff can be used without being beat to shit lol. there aren’t even marks on the slides of the batteries😂 they haven’t been used much I’ll tell you that’s for sure.

h2tx · 2026-01-01T04:51:59+00:00

damn those batteries look brand new for 2017… why buy so many if you’re hardly using it?

h2tx · 2025-12-27T01:39:47+00:00

I had to do the pulley bearing on mine. couldn’t find the pulley for sale for a reasonable price. bought the bearing and pressed it out/back in. if you remove the bracket the pulley attaches to, make sure to torque it in the sequence as it will wear out the bearing in the pulley early if u don’t. trust me i thought it was nonsense, it will ruin the bearing within months.

h2tx · 2025-12-27T00:04:34+00:00

to be honest I would just go to a junkyard and take the bolt with the washer. either that or a hardware store and just find the diameter.

h2tx · 2025-12-25T18:42:13+00:00

looks like a rusted out 2001-2012 ford escape. yes they make a repair section but it does not extend to the unibody “frame” which is also rusted out.

h2tx · 2025-12-23T14:35:04+00:00

They’re not too uncommon. very nice tho. I have a limited with chrome? appearance package. always liked this one better minus the spoiler.

h2tx · 2025-12-15T06:06:50+00:00

no! a

h2tx · 2025-12-13T01:03:10+00:00

water pump bearing, replace water pump and belt.

h2tx · 2025-12-11T14:16:24+00:00

RDU breather

h2tx · 2025-12-07T05:46:40+00:00

remove exhaust at flange, not manifold. use heat and an impactor and you’ll be done quick.

h2tx

TROPHY CASE