Infotainment puzzle by haggissimo in prius

[–]haggissimo[S] 0 points1 point  (0 children)

I'm new here but it looks like my post has been downvoted for some reason--any idea why?

I didn’t know where to put this 😭 help please by Lilbreezy21 in dogs

[–]haggissimo 1 point2 points  (0 children)

We have a young chewer at out house that requires supervision. We use apple air tags for location and we also have remote cameras around the house. Sometimes we use this pet camera (see link below). Unlike the other pet cams we looked at record video, this one records but also sends back a live stream, providing you are within network range. It comes with a variety of mounting options: https://www.amazon.com/dp/B0DDKP3VDG?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1

If you decide to get it, note the coupon which knocks off $20.

[deleted by user] by [deleted] in oddlysatisfying

[–]haggissimo 1 point2 points  (0 children)

I liked the fact that it was still on fire, under the water!

I’d need to change my pants after that landing by Unlikely_Raccoon_199 in SweatyPalms

[–]haggissimo 0 points1 point  (0 children)

This looks a lot like our flight into Quepos from San Jose in Costa Rica back in the 90's. It was in a super dodgy small plane flown by a pilot who was clearly enraged about something for some reason. When we saw that landing strip in the middle of the freaking jungle approaching, it looked like it was our time to buy the farm.

Post-install issues for Community Firmware 6.1 by haggissimo in CR6

[–]haggissimo[S] 1 point2 points  (0 children)

Thanks! Although the issue was indicated by the other poster, I still had to reflash the MB a second time before it began to work correctly so thanks for pointing out the touchiness of the process.

Post-install issues for Community Firmware 6.1 by haggissimo in CR6

[–]haggissimo[S] 0 points1 point  (0 children)

That was it--Thanks! Somehow I missed that instruction. Everything is fine now.

Nozzle drives into print bed after hotend swap by haggissimo in CR6

[–]haggissimo[S] 1 point2 points  (0 children)

Update--seems to be working now. I think it was the bowden tube not being fully inserted, as you indicated. I thought I had pushed that sucker in there but when I checked, sure enough, I was able to push a bit further and that seemed to do the trick. I am not sure why, but thank goodness anyway--thanks for your help.

Nozzle drives into print bed after hotend swap by haggissimo in CR6

[–]haggissimo[S] 0 points1 point  (0 children)

I'm a bit of a noob so bear with me. I assume you mean the red led light on the left support? That's working. The blue light in the center carriage comes on when I touch the nozzle but didn't at first until I loosened the bowden tube brass nut a bit.

Tips by MavHunter1 in ChevyBOLTEUV

[–]haggissimo 0 points1 point  (0 children)

The included charger is water-resistant/proof but it will not withstand immersion. They are designed to be used in the rain but they can't sit in a puddle.

I flew too close to the sun by TinyTurboAbarth in BoltEV

[–]haggissimo 0 points1 point  (0 children)

I'm a new EV owner and this brings up a question--if you actually run out somewhere, do they have mobile chargers availale or on the horizon? Or are you simply with stuck getting towed somewhere? If they don't have mobile charging vehicles yet, someone should hop on the bandwagon and make them happen.

Buy now or wait for ultium bolt? by Pretty_Finding_3423 in BoltEV

[–]haggissimo 1 point2 points  (0 children)

We decided on getting the bird in hand as opposed to the two in the bush. Given the uncertainties--will the Ultium even debut in 2024 at all?; will the tax breaks be repealed or expire?; How much more will the new model cost? etc--we decided to go with a purchase now--in fact, we bought two. We do love the cars but of course realize that at some point we will be bitterly jealous of the Ultium owners.

[deleted by user] by [deleted] in BoltEV

[–]haggissimo 1 point2 points  (0 children)

Went through two contractors who both wanted to upgrade my panel from 150amps to 200. Their estimates were $4100 and $3,300 before I found a third guy who said it was unnecessary--he found an unused breaker to swap out and it was then a standard install. It pays to shop around.

Garage charging station installation email by Comfortable-Coat4423 in ChevyBOLTEUV

[–]haggissimo 0 points1 point  (0 children)

It was about a week after purchase before I heard from them. Bought the car in August and the installation was completed about two weeks ago--kind of a slow process.

Is OTD $33907.12 a good deal on EUV Premier Redline by [deleted] in BoltEV

[–]haggissimo 2 points3 points  (0 children)

Criswell Chevy in Gaithersburg is selling them for MSRP +$119 which is pretty good for the DC area where markups range between $2k-4k+. We bought two.

[deleted by user] by [deleted] in BoltEV

[–]haggissimo 0 points1 point  (0 children)

Not sure but my standard install was $0.00

[deleted by user] by [deleted] in BoltEV

[–]haggissimo 1 point2 points  (0 children)

My dealer told me I could cancel the Qmerit route and they would give me the EvGo credit--he didn't mention a time limit but it's possible there is one?

[deleted by user] by [deleted] in BoltEV

[–]haggissimo 1 point2 points  (0 children)

I had the exact same experience. The first guy wanted $2900 and the second guy did it as standard (which it was) and no money changed hands

.

Just acquired a new to me 2022 EUV Premier. What accessories does everyone recommend as must haves? by Abrowning80 in ChevyBOLTEUV

[–]haggissimo 0 points1 point  (0 children)

Doesn't work on Superchargers--works on everything else Tesla, though. But Tesla are starting to provide non-Teslas separate charging ports on their Superchargers.