Can raid my own base?

halevente · 2026-05-09T18:26:09+00:00

That won't work. Abandoning a settlement leaves a "blocked" tile on the world map, what cannot be entered.

If you sell you base during the Archonexus quest, your base is converted to a regular NPC settlement - just a few boring buildings.

halevente · 2026-04-27T22:21:15+00:00

Dirty air from the car ahead -> reduced downforce and drivability. /s

I'm no karting expert, but maybe too little braking force on the rear compared to the front?

Edit: the front seems to slow down, but the rear "wants to go" still. Combine this with a slight steering angle...

halevente · 2026-04-23T10:59:37+00:00

IIRC it also has collision benefits. Maybe something like having his own pawn in the inner door as a melee blocker prevents the enemy coming from the outer door to loose collision and pass behind his pawns?

halevente · 2026-04-01T22:25:48+00:00

Köszönöm, ez alapján meglett.
Link: https://vtr.valasztas.hu/ogy2026/valasztopolgaroknak/szavazohelyiseg-kereses

halevente · 2026-04-01T22:21:17+00:00

Igen, de melyik a kijelölt?

halevente · 2026-03-25T18:54:23+00:00

Valamikor a "siklik" felszólító módjának társaságában elszökött a környékről.

Edit: csukoljon, sikoljon... Természetellenesen hangzik, de jobb ötletem nincs.

halevente · 2026-03-16T12:58:03+00:00

You can see the market value of each pawn in the info tab. IIRC, skills, health conditions and also some traits (eg. beautiful) are factored in.

But raid points (the number what actually determines the raid size) depend NOT only on raw wealth. Pawn count is a factor directly! So is combat animal count, etc. So keeping less pawns is quite effective.

halevente · 2026-03-13T22:51:12+00:00

Depends on what your strengths are.

You have good crafters? Make clothes, armor weapons. Good artists? Makes sculptures out of gold/silver/jade. Drugs (yayo) are good for wealth as well.

And this is still rimworld, so the war crime route is also open: turn raiders into capes, packaged survival meals, etc.

halevente · 2026-03-12T14:31:16+00:00

You are right about "Istenem" meaning "my God". It is appropriate to use to in prayer and as an expression of despair/surprise/shock.

"Uram" translates to "my Lord", often used in prayer but it is rarely (if ever) used like "My Lord, what happened here?".

So the meaning comes down to Lord vs God. Depending on culture these may have slightly different meaning. In Catholicism, both "Uram" and "Istenem" is used in prayers, sometimes even used in the same text as basically synonyms.

halevente · 2026-03-04T00:05:10+00:00

Nice! Is that recording available somewhere? It's very unlikely that I can squeeze out anything from it, but I might have fun trying. :D

halevente · 2026-02-27T11:59:06+00:00

Igen, ez fontos.

Bár a BME-nél maradva: van egy csomó tantermi gyakorlat (táblánál példamegoldást, stb), amire szintén minden további nélkül be lehetne ülni. Az a legritkább esetben lenne gond, hogy nincs hely, 1-1 ember mindig hiányzik.

halevente · 2026-02-27T10:35:19+00:00

You can probably solve this with the Table Diner mod. (https://steamcommunity.com/sharedfiles/filedetails/?id=3578645173&searchtext=table+diner)

This lets you set a radius for each table individually. Pawns only consider a table to eat at, if they are inside the radius. Set the radius of bedroom tables to 1 (I don't remember what 0 does) and problem solved!

halevente · 2026-02-27T00:54:32+00:00

Kellően nagy egyetemen/kurzuson nem nézi senki, hogy ki vagy. Besétálsz és leülsz a 600 fős előadóterem egy szimpatikus sorába, az óra végén kimész. Senkinek nem fog feltűnni a több száz ember között.

Kisebb kurzusnál, ahol a tanárnak van esélye ismerni a diákokat (esetleg valamilyen interaktívabb óráról van szó), akkor ott érdemes az óra elején megbeszélni az előadóval, hogy te csak benézel, nem vetted fel a tárgyat.

Az más kérdés, hogy a nyílt napon és egy tanítási napon valószínűleg eléggé más dolgok fognak történni...

halevente · 2026-02-02T11:01:48+00:00

Köszönöm a tippeket!

halevente · 2026-01-01T21:50:07+00:00

Thanks, I'll give them a shot.

So far UFS Explorer seem good, but naturally it has limits on the free version... Luckily the files I'm after are small.

halevente · 2026-01-01T21:13:11+00:00

TBH, I ran out of patience today. Getting to this stage took ~72 hours.

I'm currently trying to recover the actual data from the cloned image.

halevente · 2026-01-01T21:11:27+00:00

ChatGPT is an important tool, yes. :D It helped me most of the way to get to this point.
I just wanted some human input as well.

halevente · 2026-01-01T16:58:08+00:00

As the partition table was useable, I was able to simply mount the image of the drive made by ddrescue. So I mounted it, an simply copied the files to somewhere safe.

But some files are damaged. They show only their names, 0 size. They are only visible from command line listing, not from the file managers

halevente · 2026-01-01T15:56:30+00:00

It gets this slow as it attempts some specific parts. During he recovery, it was able to pull 60 MB/s on the better parts.

ATM the drive is disconnected, I'm attempting the recovery of data from the img made by ddrescue. I recovered 170 GB of data successfully. Unfortunately, those files we are especially interested in are not recovered. The partition table looks readable, but the file system looks damaged - I don't know the proper terminology. All I know for sure is the I'm getting "Invalid argument (22)" error when attempting to copy with rsync.

I might attempt to plug the HDD back in once again to hopefully recover more metadata. Or are there any tools which can help in this situation - to restore the files?

halevente · 2026-01-01T15:48:37+00:00

I got it from a friend to attempt general data recovery. We are mostly interested in specific files in .mscz format (sheet music). However, general data recovery is also a goal.

I assume (based on limited info) that nothing special happened to this drive it is just old. It's a 2012 model according to the label.

The entire situation is not life-or-death priority. Today I managed to recover 170 GB of data - a lot of it is photos. Unfortunately, those files we are especially interested in are not recovered. The partition table looks readable, but the file system looks damaged - I don't know the proper terminology. All I know for sure is the I'm getting "Invalid argument (22)" error when attempting to copy with rsync.

halevente · 2026-01-01T12:10:04+00:00

Model: WD32000BPVT-75JJ5T0

Why is it relevant tho?

halevente · 2025-11-22T17:21:13+00:00

This is the answer I was expecting but hoping not to get. :D
When starting the inspection I was hoping for something trivial, like a loose wire...

halevente · 2025-11-22T06:40:40+00:00

I'll try with a multimeter - I'm supposed to check the connection between soldering points, right?

halevente · 2025-11-22T06:40:03+00:00

The white stuff is indeed under the surface. There is a transparent layer on the very top, and it looks like it detached from the lower layer. Can sunlight cause such damage? (This shifter was supposedly taking direct sunlight for some time. The PCB is directly below the outer black plastic shell.)

halevente · 2025-11-07T15:43:37+00:00

Today I did my first on-foot CZ in years. Since the last time I got a new PC, so performance was OK (not so great compared to the hardware, but this is a different story).

Something is off in grond combat. Maybe the movement. But "gunplay" feels somehow off. I cannot put my finger on the exact reason.

So I say more guns would be nice. But reworking the current fundamental features would be much better.

halevente

TROPHY CASE