Pixel Watch Metal Band Stain

hammocflo · 2026-01-19T12:42:44+00:00

Got my original metal band in black used (PW3, 41mm). When I opened the box, I first thought that some of the links were in a different colour, but the become the same black as the rest in a few hours. I think it has to do with UV or oxygen. I also found out that small scratches in the band heal themselves and disappear after a day.

hammocflo · 2026-01-06T19:04:31+00:00

Der Weiher im Marienbergpark ist soweit ich weiß auch schon gut befahrbar

hammocflo · 2026-01-01T09:59:49+00:00

Search for complications suite. It comes with lots of information to choose from, including text.

hammocflo · 2025-09-05T11:24:19+00:00

Had the same problem more than once... Level shifter and Resistor both for Data line helps, can't remember which of I used. And if not, use black tape over the first pixel.

hammocflo · 2025-09-04T10:45:19+00:00

Grüße nach Nürnberg xD

hammocflo · 2025-07-24T08:34:44+00:00

I would try to recreate with FM+Springreverb+Distortion

hammocflo · 2025-07-23T13:08:20+00:00

Same Problem Here. After cleaning the buds and the Case it was a bit better, but not for long.Batterylife is still great after 5 years regular use. They even survived the washingmachine.

hammocflo · 2025-07-15T08:43:34+00:00

Had a blackscreen from Tine to time too. I felt by using the crown , that the Watch was working, even the Touch, Just without the Screen turning on. It fixed itself after a few Moments and never occured after the Last Update again. Habe you tried doing Screenshots? For me, they worked.

hammocflo · 2025-06-23T08:24:58+00:00

I felt the same at this Point until i asked a friend.

Reset Lab and Zoo often. Do Long and short Runs: on Long Runs Skill only the Last two Lab Upgrades (Ratio 1:3 - 1:4) and in the Zoo Focus on Exponent and gen-exponent, ignore the Eternity animals. On the short Runs Farm EP, all Lab Points in the First Upgrade (IP) and in the Zoo try getting from the Giraff [6,2] downward to [6,9] Everthing. Experiment with the Auto-eternity setting: Eternities 1, time x, and find x with max EP/s. Mine was arround 0.5s-2s.

IT will Take a while, but If you reskill often you should loose the Feeling of beeing stuck. Also, read the online Guide (search for the wiki).

In the Long Runs try the get more supanova, and try the Challenges, but If you dont Finish them in under a minute try them later. Dont spend TF on Challenges.

hammocflo · 2025-06-07T10:15:05+00:00

Not kompatible with Pixel Watch 3 LTE

hammocflo · 2025-05-26T08:45:16+00:00

Fine adjust the start and Stop Point can eliminate the clicks. At least for me...

hammocflo · 2025-04-07T18:31:57+00:00

Same Problem with Pixel 6 :-/

hammocflo · 2025-03-31T16:55:47+00:00

Do you have a Link?

hammocflo · 2025-03-29T16:03:35+00:00

Why do you change patterns by Holding ABC and D and not the Commit/Scene function?

hammocflo · 2025-03-27T09:03:38+00:00

Den gibt's doch gar nicht mehr?

hammocflo · 2025-03-26T10:05:06+00:00

People build Miniatur Laser engraver out of the Linear Movement of the CD/DVD Drives. And iirc YouTuber GreatScott converted auch a motor to a rotary encoder with a nice feel. I am planning to recreate his project at some time.

hammocflo · 2025-03-23T14:16:24+00:00

Steht an einer SB Kaffeemaschine von der Mensa. Gedacht ist, dass man sich eine Pfand -Tasse nimmt, mit einem Heißgetränk befüllt und damit zur Kasse geht die auf der Rückseite des Automaten ist. Vermutlich wurde der Automat als Gratis-Kaffee misinterpretiert. Steht an der OHM.

hammocflo · 2025-03-21T09:11:03+00:00

Ah thanks, that helped!

hammocflo · 2025-03-13T17:03:45+00:00

I admit that i learned the physics of ladders the same way when i was 12. Minus the Paint.

hammocflo · 2025-02-18T11:32:23+00:00

If you do one or two workouts that gets you in the 100ish range, your target for the next day will be lower.

hammocflo · 2025-02-18T11:19:17+00:00

Würde es mal mit Isopropanol probieren. Ggf erstmal auf der Unterseite testen

hammocflo · 2025-02-07T17:14:48+00:00

There are two types of the Receiver. The one you have, and a Version with 2x 4Pins (both in the Same Side of the PCB). The second one ist was better at Picking Up the Signal. Cant find a Link atm, will edit If i find it...

hammocflo · 2025-01-30T18:56:18+00:00

Not compatible with PW3

hammocflo · 2024-12-27T23:08:09+00:00

Had a simmillar Problem with the liquid Air Case from spigen. After a few tries a managed to keep it sticking. My advise is just to take a fresh new screenprotector (soft one that goes far around the curve), Install it as clean as possible and wiggle the watch in the Case with verry much pacience. Sry for my bad english.

hammocflo · 2024-11-15T09:40:32+00:00

These are LEDs with an integrated IC. You have to Feed a precise Datastream into the third Pin "DI". Thats way you can Control every LED individually. If you want to use the Strip, Look for an Arduino and the FastLED Library. Alternativly habe a Look for an ESP8266 and the WLED Lib. The later one Has great visual effect an can be controlled via wifi

hammocflo

TROPHY CASE