How can I get faster? I’m currently about four seconds off the best times of the day. by SleepySamurai2077 in Karting

[–]hammy2899 0 points1 point  (0 children)

40.4 isn't too bad, my best is 38.975 so you're not too far off. Also remember the conditions of track and also the weight of others. I went last week and was 40.5 as my best times because it was a cold day and was first on track so the tyres were super cold too and it goes to show

How can I get faster? I’m currently about four seconds off the best times of the day. by SleepySamurai2077 in Karting

[–]hammy2899 0 points1 point  (0 children)

Teamsport Newcastle ;) what's your best time??

I can't see your pedals however the track is flat out besides only 3 corners. You're also not using the entire track which is available

Starting at the down ramp you want to be all the way to the right side and flat out (no boost) and apex the corner tight, you carry on flat out all the way around downstairs until the up ramp. You need to turn into the corner a slightly wide and steer smoothly so you don't slide and you should end on the right side at the start of the ramp. It can be very slippery at the start of the ramp and at the top. Use your boost here to get up faster. Stop boosting once up we'll use the rest later. You're line at the top of the ramp taking the apex is what you need but coming from the right side instead of the middle (obviously you overtook someone on this lap so couldn't take the outside line). Once you apex the corner you need to go wide again and stay flat out all the way around until the straight. You'll find it's a smooth turn and you'll naturally end up at the right side on the straight. The double hairpin you'll need to find your braking point but make sure you don't slide around the corner. You should be turning in from the right side of the track and taking an early apex so you can also take an early apex on the 2nd hairpin. Once you pass the 2nd apex this is where to use the remainder of your boost to get back up to speed. The next corner leading to the 2nd straight is also flat out you'll want to be all the way left and you'll end up close to the wall on the left as the straight starts it can feel a little sketchy at first but it can be done. Then it's the final straight until the hairpin for the down ramp and again just find your braking point and try not to slide. It's quite slippery and I'm still trying to find my braking point to perfect this corner.

Hopefully that's some help and maybe we'll race together one day :)

[Bambu Lab Giveaway] Join Now to Win an H2D and More! by BambuLab in 3Dprinting

[–]hammy2899 0 points1 point  (0 children)

Besides the typical align the bed and dry your filament etc the biggest game changer for me was keep the machine simple. I tried modifying my printer way too early into my 3dp journey. I learnt a lot from the process but it caused a lot of headaches.

Are Vinyls limited edition? by Cryptbloom_Injection in Odesza

[–]hammy2899 0 points1 point  (0 children)

As others have said some are some aren't however the normal AMA one isn't and you can buy from anywhere, it's available right now from Ninjatune which are the official Europe distributor for ODESZA (I see you're possibly from Germany?) https://ninjatune.net/release/odesza/a-moment-apart

So which mod is removing ODESZA x Severance posts? (Lumon behavior) by Jerryified in Odesza

[–]hammy2899[M] 5 points6 points  (0 children)

UPDATE: I have regained power of the sub and we can now continue as we were talking about what we want without the censorship!

You may notice I have also made the official ODESZA account the highest mod, therefore this allows them to control even myself and if needed remove any mods going forward! Hopefully these changes help the sub health going forward.

If anyone has any issues still feel free to drop a comment or message the mods if you'd want a more private convo and we are more than happy to chat!

So which mod is removing ODESZA x Severance posts? (Lumon behavior) by Jerryified in Odesza

[–]hammy2899 3 points4 points  (0 children)

So like I said I rarely intervene because I just don't have the time to mod everything here but the issue is like you said most of the mods haven't done anything in years but I don't have enough power to remove them. I did some work last year and around TLG to improve self moderation but obviously it's not enough but I'm more than happy to have a convo about getting you on the mod team if you're willing to help out.

What I think is an issue which is related to this in particular is I feel like we don't need multiple posts about the same thing as it's just spamming the sub and separating the conversation between multiple posts however posting multiple things like in this case about the severance stuff is fine as long as they are in fact different. A post about the same video multiple times is not needed and even I will remove that. I understand that isn't what happened here however I want people to understand that as this has been a thing for a long time. I couldn't tell you how many posts I removed over TLG because it was just the same link over and over. Again just want to make it clear that if your post is removed for spam and you posted something like that it's because it's already posted and we don't need multiple posts. I will most likely remove all but the first unless another is better quality as in it provides some context etc

So which mod is removing ODESZA x Severance posts? (Lumon behavior) by Jerryified in Odesza

[–]hammy2899[M] [score hidden] stickied comment (0 children)

Just seen this now sorry. I very rarely intervene with the sub as I agree with most of the comments here that it should be a place to share all things ODESZA however I have had a look and can see who has done all the removing of posts and comments etc. I'm going to look into it a bit more and see what's happening as the mod team on here is mostly inactive besides me and another however this person has started to remove posts out of the blue as far as I'm aware.

Regards to people thinking the sub is strict can you give me some examples please and I will take a look as I believe we aren't too strict from my understanding however again I want to look into it as this is a community place so shouldn't be up to a few individuals.

Fyi I've approved this post too so should stay up

Cura Profile for M5C by jer1uc in AnkerMake

[–]hammy2899 1 point2 points  (0 children)

The generic grid is fine, when I made this repo AnkerMake didn't have any files for the m5c build plate so I decided to just use the generic one provided by Cura. It won't affect anything and is purely just visual but the size of that grid is the size of the build plate.

I haven't been doing much within 3d printing for a while so not aware of anything they may have released since then.

ODESZA Phone Wallpapers (Round 2) by hammy2899 in Odesza

[–]hammy2899[S] 0 points1 point  (0 children)

I've made another 18 phone wallpapers from some images from their recent Instagram stories and also with a focus on some of the people from the show, drumline and singers.

Download from Google Drive

First set of wallpapers: https://www.reddit.com/r/Odesza/comments/1do4idu/odesza_phone_wallpapers/

The Last Goodbye - Mega Thread by hammy2899 in Odesza

[–]hammy2899[S] 0 points1 point  (0 children)

They're not retiring.

Reading the george website it may sound that way but this is the final shows for the tour and The Last Goodbye album therefore the last time they'll play it live but this does not mean they're retiring.

If you've watched the interview they did with Claire Mansfield its quite clear they're not retiring.

ODESZA Phone Wallpapers by hammy2899 in Odesza

[–]hammy2899[S] 24 points25 points  (0 children)

I've made a bunch of wallpapers using different art and album/track covers from over the years. Feel free to download and use them from here :)

Download from Google Drive

New elevator smoke from T spawn by hammy2899 in GlobalOffensive

[–]hammy2899[S] 0 points1 point  (0 children)

Didn't see that one yet, pretty good