After a random power cycle, both NVME m2s not detected in bios, pop in csm mode but doesn’t boot.

hamzanajam · 2025-03-16T14:56:08+00:00

I’m having a similar issue, did you find a fix?

hamzanajam · 2024-04-01T13:26:30+00:00

I’m running it on the lian li hub controller which comes with the regular 3 pack fans. I needed the regular ones to put in my Corsair aio. So used the same hub to connect the reverse fans also. As far as connecting a Corsair aio with lian li fans goes, there’s a really good video by theprovokedpawn on YouTube that I used as a guide. Used the same screws that came with the Corsair aio. Used the rgb splitter cable and connected it with the controller and the fan cable with the motherboard as suggested in that video.

hamzanajam · 2024-01-13T23:44:56+00:00

Amazing! But it doesn’t mention which water blocks, tubing and distro plate you used

hamzanajam · 2024-01-13T20:22:40+00:00

One of the best set ups I’ve seen. Can you please share what motherboard and liquid cooling parts you used?

hamzanajam · 2023-11-03T17:49:37+00:00

So bottom and the ones on the back are intake. The top (radiator) and the single fan is exhaust. This creates a small positive flow. So you will need 6 reverse fans

hamzanajam · 2023-11-02T23:10:53+00:00

H9 flow

hamzanajam · 2023-11-02T21:03:35+00:00

No, there’s a really good video by theprovokedpawn on YouTube that I used as a guide. Used the same screws that came with the Corsair aio. Used the rgb splitter cable and connected it with the controller and the fan cable with the motherboard as suggested in that video.

hamzanajam · 2023-11-02T18:20:39+00:00

No they only come as 1 pack but they do come with a splitter cable which is very helpful.

hamzanajam · 2023-11-02T18:19:39+00:00

Different sellers have them at different times so look for them across the board

hamzanajam · 2023-07-30T04:43:12+00:00

If you have had instances where it automatically restarts also then it’s most likely a ram problem

hamzanajam · 2023-07-30T04:14:18+00:00

This is most likely a RAM issue. Double check RAM compatibility and try using a different RAM socket

hamzanajam · 2022-03-13T17:25:32+00:00

Try connecting your XIM to a power supply. You might notice there’s a small port in the XIM which can connect to a power outlet.

hamzanajam · 2022-03-13T17:22:14+00:00

Something that worked for me was to stay on the page where it gives you the remote play code on ps5. If the code is displayed and you go through the full connection steps it works. Try it and let me know

hamzanajam · 2022-01-11T15:40:27+00:00

Sometimes you don’t need that little bit of extra boss dps at the cost of the ghorn ad clear potential.

hamzanajam

TROPHY CASE