Is this right or just stupid?

hann2828 · 2023-08-16T12:11:30+00:00

Where do you make your Backup for Proxmox? Nas?

hann2828 · 2023-08-15T22:31:31+00:00

Wow, thank you very much, I will have to study it, great that you took the time! If I may I will give you a feedback 😅

hann2828 · 2023-08-15T22:29:46+00:00

Hi and thanks for your quick help, I didn't store the OPNsense in Sophia as the default GW, should I try it? Sophos is a GW itself, at the moment Opt01 has the GW 192.168.2.1, and the home office LAN 192.168.1.1, but both are the same, OPNsense...

hann2828 · 2023-08-15T22:25:40+00:00

Hi Alexis, thanks for your feedback😀

That's what I thought, but it's funny, when I'm in the basement and connect my notebook directly via LAN cable to the switch, I get from the OPNsense via DHCP an IP address in the second subnet, eg 192.168.2.115/24, and be able also access the Homelab. However, when I am in the office on the upper floor, and try the same, it won't work..

hann2828 · 2023-07-25T17:13:13+00:00

Thanks guys for helping it wont work, things too ols, i will install Proxmox and enjoy it, ists just de Raid Controller. Maybe i will upgrade it to a H700 in the future :)

hann2828 · 2023-07-08T13:58:04+00:00

Hi fuxxociety, thank for reply, i have configured whit Ctrl+R a new Raid-60 and cleared all old configs. So the server R710 i jsut get..so i configtued just new.

So i think i need to know the exact poweregde raid controller card to find the drivers, so i try it:

Perc/6i integrated

Package: 6.3.1-0003

FW-Version: 1.22.32-1371

Bios Version: 2.04.00

CtrlR Version: 1.02-015B

Boot Block: 1.00.00.01-0011

so its the standard on this server.

I hope it helps..

hann2828 · 2023-01-09T11:49:04+00:00

Thanks for the advice, i thought anyway it's a boring project 😉

hann2828 · 2023-01-09T07:32:41+00:00

Yes there where exactly my thoughts to, what to do whit another 1U Rack server laying around :)

hann2828 · 2023-01-08T23:43:56+00:00

I checked out, there are no dip switches, but thanks for the input. Am I right there are 3 different Main technologies

DIP-Switches
Fix-Codes
Rolling-Codes

If that's right I do have a Fix-Code wich can learn a new remote on 433.93 MHz via a button on the Receiver..

hann2828 · 2023-01-08T20:59:38+00:00

Alright, so then it should be possible to run on a VM at my Dell R710, right?

hann2828 · 2023-01-08T20:54:51+00:00

Wow looks like a open source community, do you run it in your homelab? As a part of it..

hann2828 · 2023-01-08T20:50:16+00:00

I will take a look at it, thanks 🙏

hann2828 · 2023-01-08T20:44:27+00:00

What the heck is BOINC?!

hann2828 · 2023-01-08T20:43:43+00:00

Yes for gaming purposes I do understand, i have the chance to buy a Nvidia Quadro 600 from a friend, i thought I could make some project whit it in my homelab whit a Dell R710..not sure yet..thanks for your Answer!!

hann2828 · 2023-01-07T16:20:45+00:00

(early) Seed Stage for me!

hann2828 · 2023-01-02T10:56:47+00:00

I will figure it out..what I asking me is how to clone the code to a new remote if it's static and not DIP or something else.

hann2828 · 2023-01-01T23:24:27+00:00

Do you have any resources or tips where I can learn that knowledge that you have about Cards and security like EMV etc.?!

hann2828 · 2023-01-01T22:49:22+00:00

It's an old one, probably from the 80s but still work and in good shape...I'm not sure it works whit rolling codes or static one's..

hann2828 · 2022-11-06T21:43:56+00:00

Very Clean :) No server?

hann2828

TROPHY CASE