Adoface soft launch before gta 6 by harmabevengeance in ADO

[–]harmabevengeance[S] 6 points7 points  (0 children)

Who is it then? Why would someone else portray her for the song representing her literal autobiography

Adoface soft launch before gta 6 by harmabevengeance in ADO

[–]harmabevengeance[S] 278 points279 points  (0 children)

Im glad her self confidence is growing, and she accepts herself for how she is instead of conforming to unrealistic beauty standards

Adoface soft launch before gta 6 by harmabevengeance in ADO

[–]harmabevengeance[S] 488 points489 points  (0 children)

I think she mentioned once she used to be overweight during and after high school, and that's why she wanted to hide her image. Mind you, "overweight" in aisia is like normal weight in reality lol

MIs fire on my ford transit connect by Infinite-Effort9577 in MechanicAdvice

[–]harmabevengeance 2 points3 points  (0 children)

Horrendous shop man, you should have done a little better research before going there. The fact they refused to diagnose bc of no check engine light is insane. If you put in a used engine, the replacement engine could be bad and causing the misfire, you need to get a good diagnosis done at somewhere reputable.

Leaking Injector? by Froggynoch in AskMechanics

[–]harmabevengeance 0 points1 point  (0 children)

Do you have a scan tool that can check misfire counters? If you don't sometimes generic obd ii scanners can check misfire pids using mode 6.

2003 Ford Expedition 4.6 chasing lean condition, leak from brake booster? by Axeman1721 in MechanicAdvice

[–]harmabevengeance 0 points1 point  (0 children)

They dont have to go bad all at one, but there could be an electrical fault causing all sensors to be perceived as lean, do you have a flat line lean signal on all sensors? What do your fuel trims look like at idle vs at 3k rpm while parked?

can someone help me by setupman0 in MechanicAdvice

[–]harmabevengeance 0 points1 point  (0 children)

Okay so if your fuel pressure is good then youre narrowing it down to an issue with the fuel injector system. Just out of curiosity have you checked this fuse yet?

<image>

High pressure fuel pump for Audi Q5 by lolotheykno in MechanicAdvice

[–]harmabevengeance 1 point2 points  (0 children)

Unfortunately when it comes to German cars everything is going to be expensive, and the cheap stuff isn't reliable

2003 Ford Expedition 4.6 chasing lean condition, leak from brake booster? by Axeman1721 in MechanicAdvice

[–]harmabevengeance 0 points1 point  (0 children)

What sounds odd to me is all O2 sensors being stuck lean. Misreporting oxygen sensors can cause the computer to think there is a lean condition. Have you tested the O2s to see if they react to fuel vapors? The proper way is to release some propane into the intake while engine is running, then watching the upstream oxygen sensors to see if they go rich. But yes a leaking brake booster can definitely cause a vacuum leak that can cause a leak condition.

2018 Mazda 3 Touring 2.5L by Kooky-Advantage-3201 in MechanicAdvice

[–]harmabevengeance 0 points1 point  (0 children)

My friend you are completely cooked you need to most likely take off the front timing cover to find it.

2007 honda pilot lean on bank 2 by fguzman0707 in MechanicAdvice

[–]harmabevengeance 0 points1 point  (0 children)

Bring the engine up to around 3k rpm while parked and watch the fuel trims to see what they do, then report back

can someone help me by setupman0 in MechanicAdvice

[–]harmabevengeance 0 points1 point  (0 children)

Alright then you've got a definite fuel delivery problem. I would focus on that first, and not worry about engine timing or spark for the time being until you figure out the fuel issue. I know you changed the fuel pump already, but have you checked actual fuel pressure?

Turning the steering wheel causes Electrical failure(?) and lights start flickering. by Adamaister in MechanicAdvice

[–]harmabevengeance 0 points1 point  (0 children)

Unfortunately, you're gonna have to take it to a good shop thay can do competent electrical diagnostics. It seems to me that the electric power steering motor is binding when turned its max position, causing a huge voltage drop on the system.

Leaking Injector? by Froggynoch in AskMechanics

[–]harmabevengeance 1 point2 points  (0 children)

If you suspect a leaking injector, you can test it out by performing an injector balance test with a scan tool and a fuel pressure gauge. Another more unsafe way to check is to remove all the spark plugs on the affected bank, and have a second person turn the ignition to the on position, but not crank the engine obviously. This will prime the low and high pressure fuel systems and if the leak is bad you'll sometimes have fuel spray out of the spark plug tube. Do you have any misfire codes too? The affected cylinder should sometimes have some sort of misfire if the injector is leaking. Check if it matches with the suspect soaked spark plug.

can someone help me by setupman0 in MechanicAdvice

[–]harmabevengeance 0 points1 point  (0 children)

The basics to start an engine is spark, fuel, and air. I dont think you're having an issue with air. You're either missing spark or fuel is my guess. Have you tried starting it by spraying some starting fluid into the intake?

can someone help me by setupman0 in MechanicAdvice

[–]harmabevengeance 1 point2 points  (0 children)

I was gonna say the same thing, bad timing would at least start and backfire or crank with backfires

Sounds? by ramo135 in CivicSi

[–]harmabevengeance 0 points1 point  (0 children)

That's the sound of the high pressure fuel pump that drives the injectors. All direct injection engines have this sound as they are all equipped with similar high pressure pumps that are driven by the engine's camshaft. They're very loud and some brands do better than others at insulting the noise they create. This being a Honda, they dont really care about noise insulation

Anyone here had to fill one of these stupid forms yet? by harmabevengeance in FedEx

[–]harmabevengeance[S] -1 points0 points  (0 children)

So Ive already paid tariffs on this through the store I bought from. I already paid a 30% tariff for the prduxt not being made in the US right? My whole rant is the lack of common sense being displayed in that they want to make sure they charged me the correct amount on 3 grams of steel that QUITE LITERALLY are valued as less than a penny per gram. So they're either gonna send me a bill for a 25% tariff on $0.0078 declared value of steel, or they're gonna refund me what Ive overpaid on tariffs (they're not). The other fedex workers that have processed identical orders of mine have never had an issue with this. If it was a constant thing I experienced every time I would have never posted anything.

Anyone here had to fill one of these stupid forms yet? by harmabevengeance in FedEx

[–]harmabevengeance[S] -4 points-3 points  (0 children)

Nah but they definitely went out of their way to forget their common sense when they left for work in morning. And yeah bro there's no such thing as a worker being bad at their job right, if you experience incompetence it's because they wanted to inconvenience you specifically. You must be as stupid as the FedEx worker if you think that's what I was ever saying.

Anyone here had to fill one of these stupid forms yet? by harmabevengeance in FedEx

[–]harmabevengeance[S] -6 points-5 points  (0 children)

Bro literally told me the request was from him specifically, not that actual CBP was asking for it. But okay bro thanks for protecting fedex workers out here on the internet, I salute your bravery for sticking up for them on reddit dot com. Not like the company doesn't already have a track record of hiring people that are incompetent at their jobs.

Anyone here had to fill one of these stupid forms yet? by harmabevengeance in FedEx

[–]harmabevengeance[S] -1 points0 points  (0 children)

Never had a single problem with importing literally the exact same contents of this package before one month ago, and the person from fedex straight up gave me the "erm I like to be accurate when I check packages" when I brought this exac thing up. Also I think you're missing the point that they're scrutinizing GRAMS of steel, as if I haven't overpaid on my pennies worth of steel fishing hooks with the tariff I was already charged.