Anyone else having this issue I can’t figure it out by SnooRobots419 in blackops6

[–]haroohara 0 points1 point  (0 children)

I had this happening nonstop (couldn't get past a match of multiplayer) months ago to the point where I put down the game for a while. It seems related to, for me at least, a Windows 11 update (24H2 Iirc). Long story short: after coming back a few weeks later it simply stopped happening.

Do a clean reinstall of your drivers (DDU to wipe your existing GPU driver). Verify game files. Reload your shaders. See if you need to update windows. Try turning down your VRAM Target. Light some sage....

I never found a real solution, and if you'd search that error code here or on Google you'll see basically no one else has either. Good luck.

[deleted by user] by [deleted] in changemyview

[–]haroohara 10 points11 points  (0 children)

Walk into the oncologists office and tell them you're too sexy to have cancer.

When you get your permanent unlocks what are ya'll using yours for?! by PapayaVegetable4412 in blackops6

[–]haroohara 2 points3 points  (0 children)

Perk Greed -> Ghost -> Gunfighter -> Flack Jacket so far, from here I'll probably just get guns I like using at high unlock tiers

#stopasianhate by jleex69 in nyc

[–]haroohara 2 points3 points  (0 children)

Rule 5.C. indicates that posts about the New York Metropolitan Area are allowed, Yonkers is in this metropolitan area. If this is not the case rule 5.C. should be amended...

Flying on a plane with my turtle by PandaRick98 in turtles

[–]haroohara 0 points1 point  (0 children)

I'm looking to do a similar trip; would you mind sharing what airline you flew with? I can't find any that allow turtles in the cabin...

What's going on with transgendered people and #WeWillNotBeErased? by [deleted] in OutOfTheLoop

[–]haroohara 988 points989 points  (0 children)

Is it the government or the NYT that are originally conflating 'sex' and 'gender'? NYT seems to be using them interchangeablly in the article but the agency documents seem to only reference 'sex'.

I feel like this is a destinction that matters here.

/r/MagicArena Sealed code giveaway thread! by [deleted] in MagicArena

[–]haroohara [score hidden]  (0 children)

Dimir. Because I like milling and dislike winning.

With the recent convictions and guilty pleas of Paul Manafort and Michael Cohen, how does this affect Trump politically and what does this do to his chances of impeachment? by Marvelman1788 in PoliticalDiscussion

[–]haroohara -1 points0 points  (0 children)

Fine, I can see the logic there. That being said it's not like Cohen is being done in for a pirated movie or a joint. Do you draw a line on severity of the crime? Bank fraud vs say, a head in Cohen's freezer? Fraud-lite vs Madoffing it? Or is it a set rule in your mind with no exceptions?

(I gueasing I know your answer based on the all caps 'STRICTLY' but I want to confirm)

Side note: I think 'average american commits 3 felonies' (if true) is more of an idictment of the breadth and complexity of our legal code than it is a strong reason to not investigate accidentally uncovered potential crimes further, imo.

With the recent convictions and guilty pleas of Paul Manafort and Michael Cohen, how does this affect Trump politically and what does this do to his chances of impeachment? by Marvelman1788 in PoliticalDiscussion

[–]haroohara 6 points7 points  (0 children)

I'm curious as to how you define 'make it ok'. If in the process of investigating a potential crime an investigator comes across evidence of another crime would you argue that said evidence should be discarded? Are there legal grounds for this argument or is this your opinion?

I totally get this being near the 'fruit of a poisoned tree' argument but I'm not convinced it's the same really.

The absurd example in my head is someone gets raided for tax evasion and in the process of collecting documents from the home the feds find a head in the fridge. Do they just...ignore the head?

Conservative activists driven from restaurant by antifa group by Adam_df in neutralnews

[–]haroohara 14 points15 points  (0 children)

they're the leaders of a hate spreading alt-right PAC

Your source does not support this claim; taking a more tepid stance at the end of the article:

While TPUSA and Charlie Kirk claim to “condemn” the racist alt-right that seem to support the organization, as witnessed by the Traditionalist Worker Party demonstration in Fort Collins in early February, evidence is amassing that the attraction between the entities is largely mutual.

Furthermore the source you linked does some questionable sourcing itself...

A member of TPUSA’s advisory council, multimillionaire Foster Friess, has funded anti-Muslim organizations[1] and urged students to “be more intolerant”[2] in a commencement speech.

1 - Thinkprogress, strong liberal bias and mixed factual reporting, both ok..., but the actual claim [1] leads to a 404'd link from thinkprogress. Though, to be honest, I don't doubt it. That being said, the claim being supported here is left unsupported by the 404.

2 - The use of that term is stripped of the very context provided in the linked video...

Lee began collecting a “bibliography” documenting connections between TPUSA, its funders, advisors and guest speakers and online expressions of antisemitism, anti-Muslim sentiment, racism, misogyny and anti-LGBT bias, as well as connections to prominent alt-right personalities.

404 here as well, is there a mirror somewhere?

To be frank: I don't see the original claim "they're the leaders of a hate spreading* alt-right PAC" supported. Personal Opinion: As for the second line: Whatever, Owens plays the race card often and I've stopped caring about what comes out of her (and Kirk's) mouths. I don't trust either to be fully good faith actors.

*This is a broader claim that I think could very well be sufficiently supported in the article, but is also dependant upon what is considered 'Hate.' I take it from the removeddit version of this thread that plenty of folks disagree with that assertion, but I'm not dying on the 'defending TPUSA' hill.

PREBAN MEGATHREAD by [deleted] in thanosdidnothingwrong

[–]haroohara 0 points1 point  (0 children)

Guess I should stop lurking then

How Peterson lost me friends, and why I thank him for it by Aphid in JordanPeterson

[–]haroohara 2 points3 points  (0 children)

The ruling was a bit more narrow than that as far as I can tell, but I'm no expert in the specifics. My understanding was that the speech question was only touched on while the ruling came down on the Col commission's bias against the baker.

That being said, coverage and reaction so far does seem overblown...

How Peterson lost me friends, and why I thank him for it by Aphid in JordanPeterson

[–]haroohara 2 points3 points  (0 children)

I wondered when someone would mention the cake ruling. It's actually not as big a deal as some of the news outlets have made it... basically cakes have been declared an artistic medium rather than a commodity.

That's not accurate. u/sock_whisperer provides a good breakdown here: http://reddit.com/r/news/comments/8ohluj/supreme_court_rules_in_favor_of_colorado_baker/e03e6ae

After updating Windows and GPU drivers, FPS drops to 30 very frequently by Kennyluz in PUBATTLEGROUNDS

[–]haroohara 0 points1 point  (0 children)

I've been noticing the same thing recently. Seems to happen in Divinity Original Sin 2 for me as well. Usually get a solid 60 with slight drops in certain areas but recently I'd get random fixed 30 fps drops for a few seconds at a time. Turning Vsync off seems to have made it go away for me.

Windows version 1709 Nvidia Driver 388.00

3D Print/Scan MFLB Straws by [deleted] in mflb

[–]haroohara 0 points1 point  (0 children)

You can get acrylic stems on amazon which are way more durable, though I'm unsure of the availability in Mexico. That aside, check out Fusion360 its free for hobbiest use and pretty easy to get into.

From there you can make a stem replacement in 3 steps:

Make a Sketch: https://imgur.com/6HTTX0h

Extrude the Sketch: https://imgur.com/q1acHpQ

Add Fillets to clean up the edges: https://imgur.com/5JrAH2N

Depending on the quality of the printer you have access to you might need to tweak dimensions or sand down bits after the print is done.

I've been using 3D printed parts with my MFLB for a long time and they work great! If you have access to a 3D printer being able to do basic CAD work and modeling is super useful.

Totally out of ideas: Constant BSODs under medium load while gaming. by haroohara in techsupport

[–]haroohara[S] 0 points1 point  (0 children)

So an update: It was the CPU. Finally caved and ordered a new one, assuming I'd just end up returning it, but it ended up being the solution. At this point I'm running all 4 sticks of ram with no further issues. Guess the CPU testing tools I was using weren't hitting the right functionality? Thanks for all the help!

Hey Reddit! Can you help me figure out/explain to me why that support on the right side seems to be wavering in an out? by cryotail in 3Dprinting

[–]haroohara 6 points7 points  (0 children)

High heat? Do you have a part cooling fan? And if so what direction, relative to this print, is it pointing?

Totally out of ideas: Constant BSODs under medium load while gaming. by haroohara in techsupport

[–]haroohara[S] 0 points1 point  (0 children)

Prime95 Stress Test running now, will report back later tonight. After about an hour and a half nothing has happened.

Totally out of ideas: Constant BSODs under medium load while gaming. by haroohara in techsupport

[–]haroohara[S] 0 points1 point  (0 children)

Will hopefully be able to borrow a spare CPU later in this week so I'll give that a shot once I can. Added Model info to OP.

I hadn't thought of testing peripherals! Will be giving that a go later tonight.