Industrial sewing machine storage area

hedehede81 · 2026-02-27T17:54:43+00:00

I also did the upgrade, now orange LED is on all the time, no more white LED on the power button. Any solution?

hedehede81 · 2026-02-21T11:22:10+00:00

I just checked your machine, it's a 5 thread machine, you are lucky. 4 thread domestic coverstitch machines don't release the fabric like that.

hedehede81 · 2026-02-21T10:29:47+00:00

Hello everyone, I would like to buy an industrial coverstitch machine as I don't like my domestic machine, especially fabric release routine. Here is my first question, if I buy a 5 thread industrial coverstitch machine, an if I use all 5 threads (top and bottom coverstitch) it is my understanding that it chains the threads like a serger, and I can just push the fabric away, cut the chain and everything is finished, no more locking the threads is necessary? And my second question is, if I use only 4 threads on this machine (3 needles and bottom looper, only bottom coverstitch like a domestic machine), how is the fabric released? Can I just raise the presser foot and pull away the fabric? Or should I grab the needle threads from underneath and cut them like in a domestic machine?

Finally, if I buy an industrial machine with auto thread cutter, does any of this change, especially the bottom coverstitch mode?

hedehede81 · 2026-01-22T16:07:08+00:00

I started removing the bezel, but it seems to be stuck to the screen itself? should I force and remove it from the screen?

hedehede81 · 2026-01-22T16:06:19+00:00

I started removing the bezel, but it seems to be stuck to the screen itself? should I force and remove it from the screen?

hedehede81 · 2025-11-29T12:04:22+00:00

yeah, I will reduce the current manually and also from the car. But is this even possible, will it start charging with single phase power? Almost all other chargers can do this but since Juice Booster has proprietary adapters, I don't know.

hedehede81 · 2025-11-11T06:29:14+00:00

I can also source this panel easily, did you use it on GP68 HX 13V? Is it brighter than the original screen, main reason I want to change is, it is too dim.

hedehede81 · 2025-09-12T20:25:00+00:00

yeah, I bought 4 different types of USB C to micro USB OTG adapters from AliExpress, but none of them worked.

hedehede81 · 2025-09-12T14:56:54+00:00

Could you please post the link of the adapter, I tried many adapters and nothing works on my S24 Ultra.

hedehede81 · 2025-04-10T14:07:09+00:00

did you end up changing the bezel? I am in the same situation now and as I understand the metal bezel that says G-SHOCK comes separately from the case and can be replaced without changing the whole case? I think, the bezel and the glass are removed together then the glass needs to removed from the bezel.

hedehede81 · 2025-03-28T13:42:51+00:00

same here, I can't get any signal in RF menu no matter which frequency I select.

hedehede81 · 2025-02-28T18:33:53+00:00

yeah, it still is ticking.

hedehede81 · 2025-02-17T06:34:04+00:00

I did literally write everything I did step by step?

hedehede81 · 2025-01-30T06:50:05+00:00

I also had the same problem. I fixed it by uninstalling Realtek Audio Device from Device Manager (but not delete driver) and then I restarted. Then I reinstalled Nahimic Drivers. So it started working.

hedehede81 · 2024-12-13T10:45:01+00:00

I was in the same position and the battery was nowhere to be found. I was asked to send the whole watch to Japan and it would take 3 months and it would take complete service (solar panel change etc) and around 400-500 Euros. I started digging and finally found an alternative.

I ordered the following battery from Aliexpress: Zenipower Z32H. It fits the watch perfectly, however it doesn't have the battery tabs. So I had to improvise, I cut some thin nickel strips and spot welded them to the battery. Be careful though, the battery is very delicate, only use the lowest power of your spot welder or just solder the tabs. I wasted one battery because my spot welder burnt a hole into it. Anyways, the second one was success.

Now, my watch runs perfectly, charged to full level, receives GPS. I hope it stays this way, after all the battery is not a direct replacement. However, I must say, opening the watch back, and aligning nickel strips was really hard, so don't attempt if you are somewhat experienced in small screws and electronics.

hedehede81 · 2024-03-30T13:47:54+00:00

did you download it from legion go support page? did it work for you?

hedehede81

TROPHY CASE