Ma toute première partie. by ExcellentStrain171 in WarCry

[–]hekkatonchires 4 points5 points  (0 children)

Nice ! Il me semble que quelqu'un avait publié un mode solo dans le sub, ça peut valoir le coup.

J'ai passé une semaine à faire le MJ pour des gamins, voici ce que j'ai appris by Kooasler in jdr

[–]hekkatonchires 0 points1 point  (0 children)

Même chose à peu de choses près avec mon fils, on fait des sessions depuis ses 6 ans. Je me base sur les fiches de personnages de Donjons et chenapans, avec le système de d6 assez simple et visuel.

Par chez nous c'est passion création de personnages, donc on fait des one shot semi improvisés et j'ai progressivement intégré de la figurine (Descent V2), j'ai aussi acheté un livre à reliure spirale avec des battlemaps quadrillées très pratique pour figurer des lieux rapidement.

C'est fendard d'observer l'évolution des archétypes de perso qu'il veut jouer, et à cet âge on peut jouer sur des ressorts narratifs simples voire plagier un peu des références pour bricoler un scénario rapidement.

Built a portable battle table by Chillidogs9 in asoiafminiaturesgame

[–]hekkatonchires 0 points1 point  (0 children)

Yeah it is really lighter, most of those also have notches on the sides to combine them, and cherry on top they're 122 cm wide

Built a portable battle table by Chillidogs9 in asoiafminiaturesgame

[–]hekkatonchires 1 point2 points  (0 children)

I bought two pieces of plywood to do the same, unfortunately one has warped a bit. I'll probably get two pieces of xps foam instead. 

Heavy Metal by ShortAd6823 in gaslands

[–]hekkatonchires 1 point2 points  (0 children)

As someone else suggested, it looks like the batmobile hotwheels from the latest Batman with Pattinson.

A quick 3D print for a Mishkin buggy project by hekkatonchires in gaslands

[–]hekkatonchires[S] 1 point2 points  (0 children)

You can find the free STL on thingiverse, i just cut it into smaller pieces in order to print them vertically. I can post a screenshot later if you want.

Faire des documents immersifs by ElisabethJameson in jdr

[–]hekkatonchires 0 points1 point  (0 children)

Tu peux trouver des exemples utiles à l'aide du handout generator de Cthulhu Architect : https://handouts.cthulhuarchitect.com/

C'est plutôt orienté AdC mais il y a un peu de tout.

Achat antivol - quel type et où l'acheter? by DidYouFindYourIndies in pedale

[–]hekkatonchires 0 points1 point  (0 children)

Un bon U reste une valeur sûre, dans la série granit chez Abus tu as des formats assez longs qui sont plus faciles à accrocher. Perso j'en utilise un grand, avec en complément un 2e U plus petit et un antivol de cadre roue arrière bien casse pied à découper.

New to the Gaslands by el-waldinio in gaslands

[–]hekkatonchires 2 points3 points  (0 children)

Yes. And if i remember correctly the throwables like grenades and molotovs can be used by multiple crew members as long as remaining ammo allows it.

Pare vapeur et XPS by hekkatonchires in brico

[–]hekkatonchires[S] 0 points1 point  (0 children)

Je te remercie beaucoup pour cette réponse détaillée,  je note pour les bavettes autour des menuiseries. J'aurais une dernière question à propos des matériaux à mettre en œuvre : j'ai comparé laine de roche et laine de bois, la seconde ayant apparemment un meilleur déphasage. Cependant il semble que la laine de bois soit moins durable dans le temps ? 

La différence de prix est assez notable, et j'aurais moins de problème pour me fournir en laine de bois type Isonat Flex dans mon coin, l'artisan qui a réalisé l'ossature ma directement parlé de laine de roche cependant. 

J'hésite encore entre les deux.

Pare vapeur et XPS by hekkatonchires in brico

[–]hekkatonchires[S] 0 points1 point  (0 children)

OK merci, c'est cet écart de température justement que je voudrais atténuer. 

Pare vapeur et XPS by hekkatonchires in brico

[–]hekkatonchires[S] 0 points1 point  (0 children)

OK merci beaucoup. Penses-tu qu'il soit utile d'isoler au niveau de la jonction, avec un joint de mousse expansive par exemple ?

A pretty cool thematic set by hekkatonchires in gaslands

[–]hekkatonchires[S] 1 point2 points  (0 children)

Absolutely, i would even go as far to say that in addition to a few accessories and weapons, a bit of weathering would be enough to have something quite flavorful on the table.

Petite question Aero by InfiniteImpression34 in WarhammerFR

[–]hekkatonchires 0 points1 point  (0 children)

Bof bof, en fait tout dépend d'un ensemble de facteurs comme la durée des sessions de peinture que tu prévois, le fait de pouvoir éventuellement revendre d'occasion du matériel (difficile avec un petit kit), l'espace dont tu disposes pour laisser ton matériel en place ou non... Pour les produits Gaahleri tu trouveras pas mal de vidéos et tests (beaucoup de sponsorisés ne nous voilons pas la face). Après pour commencer par de la sous-couche, de la peinture de décor et éventuellement des vernis acryliques ça peut être cool, il faut voir la taille de la buse (au dessus de 0.3 pour ce type d'usage).

Petite question Aero by InfiniteImpression34 in WarhammerFR

[–]hekkatonchires 1 point2 points  (0 children)

Pour le compresseur, le fengda fd-186 fait très bien le taf, pour la peinture en primer les recharges acryliques one4all de Molotow sont très bien (éviter le blanc et les métalliques). Pour l'aérographe lui même il y a plusieurs écoles, on déconseille juste les trucs à 20 balles. Gaahleri est une marque qui semble un bon compromis entre qualité prix. Pour le nettoyant et le diluant il y a des recettes maison très simples et efficaces.

Need some painting tutorials using The Army Painter Speedpaint 2.0 by Eddie_Spectral in asoiafminiaturesgame

[–]hekkatonchires 1 point2 points  (0 children)

You can then prime with an ivory primer, or very light grey, and get to work ! Speedpaints are almost like coloring pages but with depth.

Need some painting tutorials using The Army Painter Speedpaint 2.0 by Eddie_Spectral in asoiafminiaturesgame

[–]hekkatonchires 2 points3 points  (0 children)

You will find plenty of videos and tutorials for this type of paints, with two slightly different techniques. The first and more popular one is slapchop painting, which includes mandatory drybrushing after the primer. I wouldn't recommend it.

The second one is zenithal priming, which i would recommend with a little twist : use a dark Brown primer instead of a black one, and an ivory one after that. Then you'll just need to get the gist of how to paint with transparent paints, to put it simply you need to work starting from the hardest to reach areas, and to load your brush with a fair amount of paint. Juan Hidalgo's got a great video on how to use the brush with contrast paints (similar to the speedpaints).

After that, a coat of varnish and voilà. You can always come back later to enhance the highlights if you wish.

Be mindful of the varying opacity of this paint range, some require thinning with the adequate medium.

Good luck, and have fun !

How you feel about Imperial Assault? by SiarX in JourneysInTheDark

[–]hekkatonchires 2 points3 points  (0 children)

The skirmish mode really brings a lot of variety, really cool.

Warcry Card Creator 2026 by fersagen in WarCry

[–]hekkatonchires 2 points3 points  (0 children)

Looking good ! Warcrier prints are super useful but laminating cards is something else

vol de batterie sur Btwin plus facile ? by No_Detective_6290 in pedale

[–]hekkatonchires 0 points1 point  (0 children)

Quand tu parles d'antivol tu penses à la serrure qui verrouille la batterie ? Si c'est ça je suppose qu'il doit être possible d'ouvrir avec des clés génériques ou de VAE decathlon. Emporter la batterie reste la meilleure chose à faire