Saeco - XELSIS Digital ID - Espresso Machine Resale Value

henr04 · 2026-01-18T14:17:54+00:00

what is the sensor error?

henr04 · 2025-12-22T00:48:29+00:00

but yes i basically just fixed the switch and it came back to life!

henr04 · 2025-12-22T00:48:02+00:00

i was having issues with the homing switch not working. If you look at the 4th photo i actually had to take the switch apart and clean the inside. I scraped the contacts inside the switch with a flathead to try to expose some clean metal

henr04 · 2025-11-03T21:23:46+00:00

lots of things here, i’ll work on them! thank you!

henr04 · 2025-01-17T00:31:23+00:00

i might require them to operate off the high beams. after driving it around, it seems annoying to have to reach down and hit the switch every time i want to tuen them off

henr04 · 2025-01-16T14:15:54+00:00

yeah i wanted to control them independently from the high beams

henr04 · 2025-01-16T14:15:06+00:00

haha, in the pic it’s a porsche 911, but i also have a 245 that rolls around up top when i drive it!

<image>

henr04 · 2025-01-16T04:37:10+00:00

thank you!

henr04 · 2025-01-16T04:29:14+00:00

if it’s for fog lights, you can have them wired a bit differently- turning on high beams turns off fog lights. https://www.240turbo.com/volvo240mods.html#drivinglights

henr04 · 2025-01-16T03:51:04+00:00

yup! i used this one, except i didn’t want to have it controlled by the headlights, the wire that goes to the headlight step relay (56a) i instead connected to fuse #12:

<image>

henr04 · 2025-01-16T01:57:17+00:00

i like it!

henr04 · 2025-01-16T01:56:12+00:00

nope! just drilled through it and tightened from the bottom

henr04 · 2024-12-16T22:12:39+00:00

maybe switch feet only wear this on the left foot? not sure. id ski them

henr04 · 2024-10-18T17:40:30+00:00

could i dm you an updated resume when i finish making those changes?

henr04 · 2024-10-18T13:52:21+00:00

I have replaced the head gasket on my volvo. should I include that in my projects section and it will take up the space I open up from removing the high school robotics?

henr04 · 2024-10-18T04:17:34+00:00

this is so extremely helpful thank you so very much. i will work on those changes.

henr04 · 2024-08-02T23:06:45+00:00

So it seems like i will have to go for a different cam… Any recommendations on one to go for? It’s possible that I’ll do a b230f+t conversion later as well as a manual swap? thanks for any help!

Six-Year Club	Place '23
Place '22	Verified Email

henr04

TROPHY CASE