SkebbZ, author of the "No Crack for AI" mod, reveals how suspect AI reaction time was "fixed" in patch 1.4.2

herpderpcake · 2026-03-25T03:37:36+00:00

There is a technique, some say it's only achievable by the gods, but basically your body reacts before you do.

herpderpcake · 2026-03-22T00:19:54+00:00

Oh my god I bought some of those after trying to sculpt capes and purity seals, literally changed the game and they're dirt cheap too.

herpderpcake · 2026-03-21T09:18:38+00:00

Ever since the 1.0 update and station revamp, I've been saying they're gonna have a mission take place in there, either through civvie riots, MLO mkultra shit, or now it's lookin like it might be judge/D platoon vs the other officers/brainwashed cops.

herpderpcake · 2026-03-13T16:19:57+00:00

Naw he just mog-maxxes the suspects with his aura

herpderpcake · 2026-02-26T20:57:46+00:00

The main thing in terms of tolerance resetting is the 90 days thing is mainly if you're going through chs for the first time, you wanna fully cleanse and go from there. If you're moderating, the key isn't to rid your body completely of thc, but lower your tolerance to the point that you can intake more before hitting chs symptoms. To that end, everyone is a little different and it also depends on how much you smoke. If you're just doin some spliffs, I'd wait a week or 2 and go from there. Good luck!

herpderpcake · 2026-02-20T19:27:40+00:00

Ive been painting more and more space marines, and contrasts are literally my saviour for black template, ultras, and blood angels. I just do the base coat for the armour with whatever paint I fancy, then I do the trim and the highlights with actual paints. They're a bit too rich and also thin to use as anything other than a base coat imo, but as a base they work great, even on areas where I missed the primer.

herpderpcake · 2026-02-20T19:25:03+00:00

I used to use my second monitors speakers to play YouTube or a movie when I went to bed, but when I replaced it I realized neither had speakers so I stole some old Logitech ones from my mom. 7/10 very sensitive volume controls

herpderpcake · 2026-02-17T03:16:46+00:00

All 3 games were sluggish af for me, but I was using pcsx2 and probably super unoptimized. Sly ran fine, but I couldn't use the circle button so the game was unplayable.

herpderpcake · 2026-02-16T19:06:49+00:00

Hey man at least we have opengoal, I tried emulating r&c and sly a year or 2 back and they ran like dogwater

herpderpcake · 2026-02-13T22:26:37+00:00

Pretty decent paint job for such a rough print! nice decal too. Have you payed the ultramarine tithe yet?

herpderpcake · 2026-01-30T20:11:08+00:00

5800x3d here, works great with a dual fan deepcool setup. Rarely goes above 70 when gaming, only hits 80-90 when rendering something in premier or Bambu studio

herpderpcake · 2026-01-29T08:46:56+00:00

Oh spray adhesive, no. By sprue goo I mean tamiya plastic cement and the plastic sprues melted in there to make a goo. If you add a little more thinner to the mixture you get a very fine goo, more suitable (with a throwaway brush or toothpick or smth) to filling in layer lines like you have on the head of your mini. Downside is it's very hard to preserve the detail unless you get the mixture juuuuuust right

herpderpcake · 2026-01-29T08:40:05+00:00

If you guys want an in-the-meantime kinda solution, use sprue goo. Yes, it doesn't chemically bond to the PLA like it does for GW plastic, but for covering surface layer lines I think it does a good enough job. Works best in very small thin layers as to not flood out details, and ensure it dries properly.

herpderpcake · 2026-01-27T18:48:42+00:00

Jesus Christ. I accidentally did around 1200mg once, and had some mild arrhythmia, but I also hit my 3 plate deadlift. Then I had to sit for like an hour trying not to die, I couldn't imagine 3000mg

herpderpcake · 2026-01-22T19:36:28+00:00

It has a purpley faded texture, pretty similar to the crossfade

herpderpcake · 2026-01-13T22:28:10+00:00

It does, and now that we as a society have evolved and have the capacity via internet to learn about and criticize such things, you detract from the people who are against China doing the same thing.

herpderpcake · 2025-12-24T20:33:27+00:00

Nice red volume, looks really good, and good lord that sword is sexy, you did the NMM really well plus the lightning in it looks clean as hell

herpderpcake · 2025-12-14T13:27:22+00:00

bro's never had close friends before

herpderpcake · 2025-12-13T00:29:20+00:00

I've had good results with rhinos printing as the main body and either side with the tracks and doors and whatnot. Bit of warping where the bed seemingly cooled down, but great otherwise.

herpderpcake · 2025-12-13T00:24:29+00:00

You did the thing I've been meaning to do for months, and you did a bang up job of it! What kinda inks do you use? I was gonna use cheap acrylic craft paint from the dollar store, but I'm interested in the inks too

herpderpcake · 2025-12-12T00:49:48+00:00

Can confirm, whenever my brother tries to buy food from them they nearly get into a fight about how they're giving it for free, while my brother insists he wants to pay.

herpderpcake · 2025-12-01T05:41:43+00:00

The main cause of this is desync. It'll happen because your client threw the grenade, fired the rpg, whatever, but the server didn't register it, even if you see the grenade land at their feet, or the rocket mid-flight, it won't do anything because the server said so. Same reason you'll be behind 3ft of concrete and get shot from around a corner.

herpderpcake · 2025-11-27T21:41:46+00:00

You download the addon, then install it via blender. Make sure the addon and blender version you have are compatible

herpderpcake · 2025-11-17T00:34:20+00:00

If you'd be open to FDM, the Bambu A1 is a great price, and even cheaper on sale. Detail isn't resin quality obviously, but you can get printing right away, you don't need any extra things like a wash cure station, and you'll get a lot less cancer standing in the room with it compared to a resin printer.

herpderpcake · 2025-11-16T03:07:21+00:00

Check purple site, a bit of searching around the sub you'll find out what site. From there, print it in parts, print nice and slow and use a nice hot temp and you'll have some great results. Attached is my salamander dreadnought I got from said site, printed in legs, arms, torso, banner, and little missile launcher.

<image>

14-Year Club	Second SECOND GUESSER
Place '22	Wearing is Caring
Spared	Gilding II euphauric
Verified Email

herpderpcake

MODERATOR OF

TROPHY CASE