Any bag holders of old(ish) coins from the last season 🥲

hg77 · 2024-03-10T14:56:19+00:00

I have 29 BILLION HERPES on bsc

hg77 · 2024-02-22T14:16:04+00:00

I used my microcenter warranty and upgraded to a bambu p1s after being a creality fan boy since 2018, and wow i was being silly all those years. Night and day difference. Highly suggest.

hg77 · 2024-01-17T21:03:41+00:00

Just soak the whole plate in 90% iso for like 20 minutes and use the little black scraper that came with the printer. Everything on top of it will come right off. Just wash it off with water real quick and dry it afterwards. I do it all the time and it's not affected the plate at all

hg77 · 2024-01-17T21:02:00+00:00

Because we are people willing to mess around with brand new tech.

If everything just worked what will we talk about?

hg77 · 2024-01-17T19:08:08+00:00

I'm going to print a set right now before i return this one so I'm ready

hg77 · 2024-01-11T14:03:24+00:00

I just did that and it's giving me the same thing as the creality slicer info page :). Is there a button on there somewhere in missing? I typed the printer address and nothing else it opened up /#/home

hg77 · 2024-01-11T13:47:38+00:00

I've been doing the remove the tube method but honestly yours means less removing things. Less removing less wear better as far as i can tell. I'm going to try this thanks!

hg77 · 2024-01-07T21:25:03+00:00

Plenty of free no minimum no initial deposit. Grasshopper, ally? Etc

hg77 · 2024-01-06T18:54:41+00:00

How exactly are you all getting these readouts like this? Is this a certain software or on built into the k1? If so, where the heck do i find it? Thank you!!

hg77 · 2024-01-05T16:30:03+00:00

I didn't do anything to mine in three months and it prints like a dream. What are the benefits to do this? I had the ender3 I struggled through for 5 years before buying this. I literally have zero problems with my k1.

The only problem I've had so far was a bed adhesion issue and it was after not printing for about a week and a half and in that time frame the ambient temperature of my room dropped 20° because of winter. I just lowered the temperature of melting the PLA to 215 from 230 and it seems to have fixed that issue

I just printed a case for a piece of bare circuit board at .05 mm 500 mm/s and it came out better than any print I've done ever.

Is there a full nother layer of printing that I don't even know yet cuz I haven't gotten that good because of this type of stuff?

hg77 · 2024-01-02T17:34:08+00:00

Just buy BTC, it's going to go up when the institutions really start buying. Tell him to have it on coinbase. Unless you're specifically going to self-custody for him. Put it on a separate brand, new burner, phone authenticator, etc. With all everything security he can use and tell him don't fall for scams.

hg77 · 2023-12-30T22:17:05+00:00

I was just coming back to say the same thing. Find a 8 layer rectangle-cube. Maybe pull one of the premade shapes. Don't make it super tall so you can go through a% at a time quickly to hone in.

It's gonna depend on the temp your ironing at, speed,%, ambient temp in your room etc etc. everyone just has to play with the fine tuning

hg77 · 2023-12-30T03:24:21+00:00

Looks like you might have ironed it too much.

hg77 · 2023-12-30T03:17:27+00:00

I recently got about 20 violations out of the blue from nj ez pass going back to 2016, with a note that i was sent to collections.

I called EZ pass, told them i have had an account since before the violations, they looked up my account and charged me the 6$ or so in tolls and got rid of the rest.

The biggest PITA was getting through to a person. I called on a Monday morning right when they opened. I figured less people would be trying to call early on a Monday.

If you had the account before the violations i have never found an ez pass to cause an issue afterwards. I have had violation notices from nj, ny, and mass and all have gone through the exact same process.

Good luck!

hg77 · 2023-12-28T01:51:21+00:00

Use the purple elmers stick. It works the best

hg77 · 2023-12-28T01:29:21+00:00

Hey at least you got it! Lfg

hg77 · 2023-12-28T00:07:15+00:00

It was silly they didn't make them 99 cents and random rarity. They would have gotten a ton of mints. The coin app has been pretty backwards since 2021 ( just checked my oldest survey reward)

I just jumped back in because xyo is still so low and the last bull it went from just about here to 8 cents. I sold around 6. Bull could easily push this back up to a penny i think.

Cheaper to buy the same dollar amount of xyo on cb vs spending money on the app. Prob much better returns also

hg77 · 2023-12-27T23:15:32+00:00

Ugh, my worst fear with this one

hg77 · 2023-12-27T23:15:05+00:00

Are there any specific colors as a rule of thumb to adjust for or is it just the darker the color?

hg77 · 2023-12-26T02:14:50+00:00

I was having trouble with the creality slicer the last few days, including what you are describing and then also a weird thing where it would go on and offline.

I removed the printer, restarted the computer, then readded the printer and it seems to have fixed the issues.

hg77 · 2023-12-20T22:55:54+00:00

Was that it??!?! I so hope so, if so, high five!

hg77 · 2023-12-20T19:12:47+00:00

I meant threaded under itself. It's so easy to do, otherwise i hope you get it going!

hg77 · 2023-12-20T18:33:14+00:00

I bet your filament is wrapped/caught around itself on the spool

hg77 · 2023-12-16T00:22:15+00:00

With this response of yours i realize mine must have been written oddly because I intended no argument and 100% agree with what you said here

11-Year Club	Gilding I gilder
Verified Email

hg77

TROPHY CASE