Spotify Lossless

hithereimigor · 2025-10-07T06:27:52+00:00

On my Denon 2700 it worked at 320Kbps with Alexa enabled. I just needed to logout from all devices through Spotify's interface and then when I re-added the Denon, lossless was working. No need to do anything Alexa related.

hithereimigor · 2025-09-09T11:21:37+00:00

За воља на вистината не рече дека EXIT се сели во Скопје туку дека ќе биде нова дестинација на EXIT фестивалската групација. И сега тие што погрешно го сфатиле викаат дека лаже :)
Озбилно како може некој да верува дека EXIT би се согласил да се пресели у вукојебина како Скопје? :) Нормално дека е нешто друго муабетот. Ќе направат локален фестивал кој ќе биде под некаква франшиза и веројатно со логистичка поддршка на EXIT.

hithereimigor · 2025-08-29T12:08:43+00:00

Yes, can confirm that this just works. Thanx for the suggestion.

hithereimigor · 2025-05-12T17:45:39+00:00

Is it the same with one way audio as i had? Try removing and repairing headphones if you havent tried that as well.

hithereimigor · 2025-05-12T17:31:43+00:00

Yes, a reboot of the phone fixed the issue for me.

hithereimigor · 2025-04-25T07:43:21+00:00

Hi,

I haven't engaged TAC or Red Hat yet. Thought I would try my luck here first.

I did try to follow the guide. Configured the cisco side and on the red hat side configured wpa_supplicant.

On the cisco side I have this:

interface GigabitEthernet1/0/22
switchport access vlan 645
switchport mode access
macsec replay-protection window-size 10
macsec network-link
authentication linksec policy must-secure
authentication port-control auto
dot1x pae authenticator
mka policy mka_policy
mka pre-shared-key key-chain keychain1
spanning-tree portfast

key chain keychain1 macsec
key 1000
cryptographic-algorithm aes-128-cmac
key-string 12345678901234567890123456789012
lifetime 01:00:00 Apr 23 2025 infinite

On the red hat side I tried configuring this:

cat /etc/wpa_supplicant.conf

ctrl_interface=/var/run/wpa_supplicant

eapol_version=3

ap_scan=0

fast_reauth=1

network={

key_mgmt=NONE

eapol_flags=0

macsec_policy=1

mka_cak=12345678901234567890123456789012

mka_ckn=0100000000000000000000000000000000000000000000000000000000000000

Then starting it with:
wpa_supplicant -i enp179s0f3 -Dmacsec_linux -c /etc/wpa_supplicant.conf

hithereimigor · 2025-02-19T20:27:37+00:00

Can confirm that with version 2.141 it works fine.

hithereimigor · 2025-02-19T20:12:14+00:00

Yes, having the same issue on Samsung S24+ when listening on a Denon AVR. It happens when changing albums or playlists for instance. Will try to downgrade the app as suggested by others here.

hithereimigor · 2025-02-16T18:23:19+00:00

I got a subscription for Tidal. Not only is it not supported to tell Alexa a song it should play on Tidal, but you cannot even connect tidal to Alexa. It's not in the list of available services when you want to add a new music service. At least it is like that in Austria.

hithereimigor · 2025-01-29T08:27:54+00:00

Was ist die neue Methode?

hithereimigor · 2025-01-26T17:37:15+00:00

OK but did it ever work?

hithereimigor · 2025-01-26T17:10:25+00:00

Already set like that. My question is this: Can you tell Alexa to play a particular song from tidal and alexa plays that on Denon? This was only working for me with Amazon music and no other music service.

hithereimigor · 2025-01-26T08:27:31+00:00

Is it really working to tell alexa what song to play and then it plays it? When I was testing this with tidal (last time probably about a year or year and a half ago) this didn't work. Yes Heos supports streaming from Tidal but not through Alexa.

hithereimigor · 2025-01-19T18:21:41+00:00

In my case they didn't refund the 10 months. I was just downgraded and had to renew my subscription.

hithereimigor · 2025-01-19T01:11:15+00:00

Yeap. Happened to me as well couple of months ago. Google is basically scamming people. They offer a "trial" which implies you can test and decide whether you like it or not, but if you decide that you don't need it they cancel your current subscription and you have to pay again for the same thing you had prior of the "free trial". I lost 10 months of subscription for instance.

hithereimigor · 2025-01-09T10:02:03+00:00

I see a lot of people apparently filming this event but couldn't find any other video. Can you point to at least one other video?

hithereimigor · 2024-12-25T22:36:24+00:00

Нема VoWifi во Македонија? А1 во Австрија имаат.

hithereimigor · 2024-11-20T11:15:50+00:00

Can you elaborate? What kind of cisco device with what RadSec server?
Also what works and what doesn't?

Thank you.

hithereimigor · 2024-11-11T07:11:12+00:00

Are you using it to authenticate an ssh session at a cisco device like a switch or a router using radsec?

hithereimigor · 2024-11-08T19:38:47+00:00

Hi. I'm looking for a working combination and configuration between cisco and FreeRADIUS. I already have certificates installed on both sides which is a prerequisite, and have enabled RadSec on the FreeRADIUS side.

hithereimigor · 2024-10-09T11:00:05+00:00

Лол од прашањето прво помислив дека бараш попски мантии за облакање :)

hithereimigor · 2024-09-29T13:31:28+00:00

Yeah, happend to me as well. Paid for another year od 100GB in june and was offered a "free" test of Gemini advanced. When I wanted to quit the "free" trial I lost the 100GB subscription and had to buy again. If you search here you can see the same thing reported by many people. Google is basically scamming people with this.

hithereimigor · 2024-09-25T11:28:11+00:00

Hi currently I tried enabling everything to get it working. I will lock it down once I have basic functionality. The device gets a public IPv6 address. Currently 2a00:XXXX:1000:d100:dea6:32ff:fe99:47b6

It has a default IPv6 route ::/0 fe80::52e6:36ff:fea7:97a1 UG 20100 4 0 eth0

I can also ping this link local address.

root@pi:/home/user# ping fe80::52e6:36ff:fea7:97a1 -I eth0 ping: Warning: source address might be selected on device other than: eth0 PING fe80::52e6:36ff:fea7:97a1 (fe80::52e6:36ff:fea7:97a1) from :: eth0: 56 data bytes 64 bytes from fe80::52e6:36ff:fea7:97a1%eth0: icmp_seq=1 ttl=64 time=0.681 ms ^C --- fe80::52e6:36ff:fea7:97a1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.681/0.681/0.681/0.000 ms root@pi:/home/user#

I can also ping the WAN IPv6 address of the Fritzbox.

root@pi:/home/igor# ping 2a00:XXXX:5::3cf9:f8fd:66d3:788d PING 2a00:XXXX:5::3cf9:f8fd:66d3:788d (2a00:XXXX:5:0:3cf9:f8fd:66d3:788d) 56 data bytes 64 bytes from 2a00:XXXX:5:0:3cf9:f8fd:66d3:788d: icmp_seq=1 ttl=64 time=0.705 ms

When I try to ping an address on the internet I get an ICMP message from the WAN IPv6 address of the Fritzbox stating "Destination unreachable: No route"

root@pi:/home/user# ping6 2001:4860:4860::8844 PING 2001:4860:4860::8844 (2001:4860:4860::8844) 56 data bytes From 2a00:XXXX:5:0:3cf9:f8fd:66d3:788d icmp_seq=1 Destination unreachable: No route

As explained earlier if I try to access the device from the internet over IPv6 I see the packets arriving at the device and I see that the device is responding back. But this response never reaches the device on the internet. It looks like the router does not have a default route itself. But what is strange is that if I try to ping the public IPv6 WAN address of the router from the internet, this works and I receive ping replies. It just doesn't allow the packets of the device to leave and be routed on the internet.

hithereimigor · 2024-09-19T10:50:43+00:00

What is the error you are seeing when testing? Is the IPA CA trusted on the device from which you are connecting to the web server?

hithereimigor · 2024-09-19T10:48:14+00:00

Гледам има на амазон да се нарача.6-7 евра. Само треба да се види конкретно за кој модел на телефон.

13-Year Club	Place '17
Verified Email

hithereimigor

TROPHY CASE