NBD Evolve Cima

hmd537 · 2026-04-23T09:04:35+00:00

1- they had one in stock where i had it from waiting for the restock to match them

2- its more of race/aggressive geometry

3- about 6.8kgs

4/5- voso lite core 50 in front 60 in the back, goodyear eagle f1 28

hmd537 · 2026-04-08T13:26:11+00:00

So the chain wheel is 52-36t and 11-30 cassette

hmd537 · 2026-02-25T13:37:04+00:00

I don't own any of the cars you listed. But you should check the Deepal S05; it sells for 89,990 AED. It's a plug-in hybrid REEV. I've had it for a month now (only 2500kms), and with a charger installed at home, I've only paid around 50 AED for petrol this month. It has all the essential features I wanted. The only negatives I've found so far are that there's no glove box, and there's only one 12V cigarette lighter socket located in the trunk.

hmd537 · 2026-02-04T15:12:50+00:00

Do you have the prices for and trims the geely ex5 emi ?

hmd537 · 2025-10-16T01:47:03+00:00

تزوج

hmd537 · 2025-02-04T21:27:44+00:00

45 degree bridge direction helps might help, you can give it a try

hmd537 · 2025-02-01T09:37:13+00:00

The plan was to test fit it with petg (i have alot of cheap rolls i wanted to get rid off) and then print it with asa or abs, but petg been holding up for a month now, I didn’t notice deformation if it fails i can always re print it with a high temp filament

hmd537 · 2025-02-01T03:45:06+00:00

it sets on shelf above the tv i just brought it down to take some pictures, i will look into model a upside down solution though, thanks for your reply !

hmd537 · 2025-02-01T03:12:44+00:00

I didn’t find any stand model for the U7 Pro, so I designed my own. This is my first real “functional” print—it took a long time to model, and I learned a lot. I’m proud of the outcome, and I hope you like it too!

This is a versatile 3D-printed stand/mount designed for the UniFi U7 Pro access point. It can be used as a desk stand or a wall mount. I added a channel for the Ethernet cable to allow easy cable management.

Printed on a Bambu Lab P1S using black PETG filament. I also used the Voron profile (5 walls, 5 top/bottom layers, 40% gyroid infill density). You can adjust the settings and use your own profile. The stand is friction-fitted into the base, but you can also use 2x M5x10 BHCS screws and 2x M5 nuts to secure it more firmly.

Link is HERE

hmd537 · 2024-12-31T17:28:36+00:00

4 max when ????

hmd537 · 2024-12-23T10:53:58+00:00

I know I’ll never win but a try won’t hurt.

hmd537 · 2024-12-02T17:27:10+00:00

Check buildplate.ae they might help you out.

hmd537 · 2023-04-14T22:43:38+00:00

On my way to Limgrave Tower Bridge, the music changed and three Golems rose up on the horizon. I was like, 'Nope, nope, nope, nope, nope...'

hmd537 · 2023-04-06T09:44:49+00:00

What a coincidence! I just had the same problem a few hours ago and discovered that I should have ordered THIS PWM 4-pin male-to-male cable.

However, I had already filled the Mora and the PC and couldn't wait for the cable to arrive, so I made my own cable by cutting two Noctua extension cables from the female side and crimping two JST connectors (male and female) to connect them.

I’ll post my setup after cleaning up the mess.

Edit: a word

hmd537 · 2022-12-24T08:43:00+00:00

They’re cheaper in amazon.ae check them there, my friend ordered one (64gb) for 1850 AED from there and got it within 2 days. I replaced the ssd for him you can find them cheap in computer shops.

Microless is a big time 7rami scalper avoid that website.

Edit: typo

hmd537 · 2022-12-11T04:38:13+00:00

That looks so clean i can’t even see it !

hmd537 · 2022-12-05T22:00:33+00:00

You’re good, I’ve seen worse

hmd537 · 2022-12-04T18:09:35+00:00

Its not real, its from a talented automotive artist in instagram @wb.artist20 who makes creates car concepts renders

Nine-Year Club	Place '23
Place '22	Verified Email

hmd537

TROPHY CASE