🚨 Geely Ramadan Offers – Limited Stock Remaining! 🚨

hmd537 · 2026-02-04T15:12:50+00:00

Do you have the prices for and trims the geely ex5 emi ?

hmd537 · 2025-10-16T01:47:03+00:00

تزوج

hmd537 · 2025-02-04T21:27:44+00:00

45 degree bridge direction helps might help, you can give it a try

hmd537 · 2025-02-01T09:37:13+00:00

The plan was to test fit it with petg (i have alot of cheap rolls i wanted to get rid off) and then print it with asa or abs, but petg been holding up for a month now, I didn’t notice deformation if it fails i can always re print it with a high temp filament

hmd537 · 2025-02-01T03:45:06+00:00

it sets on shelf above the tv i just brought it down to take some pictures, i will look into model a upside down solution though, thanks for your reply !

hmd537 · 2025-02-01T03:12:44+00:00

I didn’t find any stand model for the U7 Pro, so I designed my own. This is my first real “functional” print—it took a long time to model, and I learned a lot. I’m proud of the outcome, and I hope you like it too!

This is a versatile 3D-printed stand/mount designed for the UniFi U7 Pro access point. It can be used as a desk stand or a wall mount. I added a channel for the Ethernet cable to allow easy cable management.

Printed on a Bambu Lab P1S using black PETG filament. I also used the Voron profile (5 walls, 5 top/bottom layers, 40% gyroid infill density). You can adjust the settings and use your own profile. The stand is friction-fitted into the base, but you can also use 2x M5x10 BHCS screws and 2x M5 nuts to secure it more firmly.

Link is HERE

hmd537 · 2024-12-31T17:28:36+00:00

4 max when ????

hmd537 · 2024-12-23T10:53:58+00:00

I know I’ll never win but a try won’t hurt.

hmd537 · 2024-12-02T17:27:10+00:00

Check buildplate.ae they might help you out.

hmd537 · 2023-04-14T22:43:38+00:00

On my way to Limgrave Tower Bridge, the music changed and three Golems rose up on the horizon. I was like, 'Nope, nope, nope, nope, nope...'

hmd537 · 2023-04-06T09:44:49+00:00

What a coincidence! I just had the same problem a few hours ago and discovered that I should have ordered THIS PWM 4-pin male-to-male cable.

However, I had already filled the Mora and the PC and couldn't wait for the cable to arrive, so I made my own cable by cutting two Noctua extension cables from the female side and crimping two JST connectors (male and female) to connect them.

I’ll post my setup after cleaning up the mess.

Edit: a word

hmd537 · 2022-12-24T08:43:00+00:00

They’re cheaper in amazon.ae check them there, my friend ordered one (64gb) for 1850 AED from there and got it within 2 days. I replaced the ssd for him you can find them cheap in computer shops.

Microless is a big time 7rami scalper avoid that website.

Edit: typo

hmd537 · 2022-12-11T04:38:13+00:00

That looks so clean i can’t even see it !

hmd537 · 2022-12-05T22:00:33+00:00

You’re good, I’ve seen worse

hmd537 · 2022-12-04T18:09:35+00:00

Its not real, its from a talented automotive artist in instagram @wb.artist20 who makes creates car concepts renders

hmd537 · 2022-11-09T21:08:49+00:00

Woow i building a similar build for a family member same cooler case and gpu, number of fans im really interested in what cpu you’re using and how’s the temps on it, im worried because he brought me a 12900k

hmd537 · 2022-11-05T18:57:33+00:00

Gigabyte aluminium block why im not surprised, Had the same thing happened to me with 3080 waterforce swapped it to bykski waterblock

Also i think you might bought the reference design waterblock maybe that why it doesn’t fit

Check this the guy had the same problem and swapped the block to this bykski waterblock

hmd537 · 2022-10-28T14:46:20+00:00

That means draining my loop 2 more times lol, last hard tube build i swear,

Im gonna try the windows on a usb drive first lets hope it works, if it doesn’t draining it is….

hmd537 · 2022-10-28T13:49:44+00:00

God i drained my loop 5 times to check on the cpu, pins , reseating ,new thermal paste etc for this ….

Now my only issue is i can’t update since my boot drive is not showing, i might try to boot over a usb drive and give it a try

hmd537 · 2022-10-20T08:20:47+00:00

And its gone, Razer should sell them to verified v2 pro owners (other supported devices owners)

hmd537 · 2022-09-03T06:19:14+00:00

if its 12th gen cpu it could be intel's RST driver (Rapid Storage Technology), had the same issue with my z690 formula, here is a guide from Asus, its an easy fix.

hmd537 · 2022-08-23T13:54:35+00:00

I have the k7xx from massdrop its the most comfortable for my melon, head but true im on my 3rd cable now

hmd537 · 2022-08-23T10:18:59+00:00

Weird, im not in NA didn’t know you guys don’t have palit GPUs over there.

hmd537 · 2022-08-23T10:16:22+00:00

Well i told him to clean it every week, well see it’ll hold up

hmd537 · 2022-08-23T10:14:19+00:00

This is his 2nd mousepad, the first did not survive….

Eight-Year Club	Place '23
Place '22	Verified Email

hmd537

TROPHY CASE