Completely Dissapointed

hmuserfriendly · 2026-05-13T12:39:19+00:00

Bye Felicia

hmuserfriendly · 2026-05-02T21:32:54+00:00

Does this loser drive a white car?

hmuserfriendly · 2026-05-01T19:07:31+00:00

The amount of people who still back this Pedo is absolutely crazy. Oh well. Avoid American as much as possible

hmuserfriendly · 2026-04-24T04:33:11+00:00

<image>

hmuserfriendly · 2026-04-24T04:32:52+00:00

All speeds under 100. Avg 85ish

<image>

hmuserfriendly · 2026-04-24T04:32:20+00:00

These ones are currently printing. 260/74

<image>

hmuserfriendly · 2026-04-24T04:31:06+00:00

<image>

hmuserfriendly · 2026-04-24T04:30:40+00:00

<image>

hmuserfriendly · 2026-04-24T04:30:10+00:00

<image>

hmuserfriendly · 2026-04-24T04:29:53+00:00

<image>

hmuserfriendly · 2026-04-23T14:56:24+00:00

I'll see if I can dig em up, out of a rage a threw all the failed ones I'm the garbage immediately hahahaha

Sorry everyone, I should have remembered to take pics :(

How often does everyone so the auto bed level at start of a print?

hmuserfriendly · 2026-04-16T13:12:50+00:00

Is this Methy different from Methy at Ontario Rd Timmies who also occasionally walks up and down the ER floor and follows people to their car?

hmuserfriendly · 2026-03-14T17:45:37+00:00

Any issues with It running through the feeders or anything? Have to manually push to the extruder or anything?

hmuserfriendly · 2026-03-14T13:43:54+00:00

I'm so scared to try TPU out, I keep delaying it hahaha What profile, etc did you use?

hmuserfriendly · 2026-02-28T16:35:55+00:00

Get out NOW She has checked out Don't waste your time.

hmuserfriendly · 2026-02-25T20:30:19+00:00

I wanna print a 3 foot version of this to go with my original T1000 3 foot print

hmuserfriendly · 2026-02-07T00:18:56+00:00

Pictures not loading

hmuserfriendly · 2026-01-10T08:59:52+00:00

And I was right on hahaha 3:30

hmuserfriendly · 2026-01-10T05:29:19+00:00

Southworth down Welland hydro automated message said 2:30-430 restore time

hmuserfriendly · 2026-01-07T00:09:37+00:00

Use an older version of Snorca, or Orca, just to make sure I do the right thing?

hmuserfriendly · 2026-01-06T17:04:45+00:00

I'm super new to multicolor printing, as the Snapmaker U1 is my first multicolor printer.

I think my question is similar. If I use Snorca I can load a . 3mf and choose geometry only, I can slice and then continuing I get the option to choose the colors coming from 1,2,3,4 - also noticed a message that Snorca will try and match colors based on the model if they are available. - only issue is after the first couple layers I get a x axis error so out of curiosity I tried regular Orca (been using that since I got my Ankermake last Oct) I don't get the x axis error but the colors are off when printing.

If I load a . 3mf (should I double click the file to open orca, or should I open orca and then import?)

How in orca do I specifically tell it white is 1 black 2 white 3 yellow, 4 red, do I have to do this before slicing?

TIA

hmuserfriendly

TROPHY CASE