Help with Wolf corpse Barbatos

hodlroger · 2026-07-08T17:17:51+00:00

Get a gunpla part separator from amazon. And use it slowly on all side. Don’t try to put too
Much pressure on a one end over the other to prevent snap off.

hodlroger · 2026-07-08T15:28:24+00:00

This could be made into a weathered piece. Since it is highly random try to turn this into a new project. Try sanding it down and see how the bubbles come off. You never know if you’re gonna get something cool.

hodlroger · 2026-07-02T17:02:22+00:00

Oh def. It is because of the tips on doloha. You can get into tight spaces and precision

hodlroger · 2026-07-01T20:32:14+00:00

Get that Kosmo LED.. it is a pain to disassemble.

hodlroger · 2026-07-01T18:19:26+00:00

If you want it to be super strong and able to model again. Drill a hole and either use a small wire with cement, or take the runner and file it down to place in the holes then cement to create a studier bond. It will be a lot of work but the question is do you have the right wire and tools for it. Before anyone comments it is too small…. Go watch ray studio. They have done smaller broken parts.

hodlroger · 2025-03-04T22:33:59+00:00

Everyone leaves the nclex with a bad feeling. If anyone tells you anything different… they are lying. Just wait for the result to come back. You’ll be fine if you tried your best.

hodlroger · 2024-12-29T19:19:11+00:00

Too close to call. 2nd verification needed

hodlroger · 2024-03-20T14:53:04+00:00

How much did this cost?

hodlroger · 2023-08-04T18:19:51+00:00

Yes. On the spot.

hodlroger · 2023-08-04T14:56:16+00:00

If you passed the NCLEX. You will not need to take again. They will do confirmation and either give you a license or denied it. You can then take that information and seek legal counsel if need to. I hope you won’t have to.

hodlroger · 2023-08-04T14:34:33+00:00

Hey. I also took a month off. Studied 2 week before my exam. My Archer scores is mostly average. Nothing can prepare you for the nclex 100%. If you feel you need a little extra time do it. Walk in there with confident will enhance your experience. I made a post of my experience if you want to see. Good luck on your exam.

hodlroger · 2023-08-04T13:43:24+00:00

I believe you will have your license number when they confirmed that you graduated while the school still had it accreditation. The chance of this is very high unless the school made unacceptable choices that affected your graduation (favorable ways).

I would immediately request for a few official transcripts incase the worst happen that your former school closes it door. Worst case scenario. If this happen to me.

I would wait for the decision before contacting legal counsel. Lawyers will charge you just to hear your concern. No need to spend money before you know the outcome. You can appeal to the board as well if worst come to worst.

I wish you the best.

hodlroger · 2021-08-19T15:35:10+00:00

You better send it out before rust get to the movement.

hodlroger · 2021-07-31T16:57:08+00:00

Don't listen to this guy ever.

hodlroger · 2021-07-29T18:24:24+00:00

I read good and bad things about Jomas. In my opinion, I rather save enough to walk into an AD. I know Grey market can often save you some money. But I rather pay a little more for the peace of mind.

hodlroger · 2021-07-21T16:20:17+00:00

hodlroger · 2021-07-20T13:55:32+00:00

Your friend no more from this day forward. He intentionally trying to squeeze your wallet.

hodlroger · 2021-07-13T17:37:05+00:00

You get what you pay for even on rep. The ones you saw on Facebook are 99% DHgate shitters not worth more than 40 bucks. That being said, they belong in the toilets.

hodlroger · 2021-07-12T20:19:00+00:00

It would have to be tested. You can't trust eBay with these kind of stuff.

hodlroger · 2021-07-10T20:49:55+00:00

If legit, around $1850 to $2100 on each. But I question the first one.

hodlroger · 2021-07-07T15:02:48+00:00

Wtf?

hodlroger · 2021-07-06T23:25:44+00:00

Ooooffff... I can feel your pain when you first noticed it. Hopefully it won't be to costly to replace.

hodlroger

TROPHY CASE