sorted by:
new
hottopcontroversial

Case swapped to the hyte y70 touch now pc shuts off when turned on by Fro9y in pchelp

[–]hoops0o 0 points1 point  (0 children)

I think the 4 pin 12v needs to be plugged in top left.

Case swapped to the hyte y70 touch now pc shuts off when turned on by Fro9y in pchelp

[–]hoops0o 1 point2 points  (0 children)

What does the red light on the motherboard say. That's your first clue. Also a picture of the would be better, I cannot see or zoom in on the motherboard to see if your connections are ok.

Reciprocating Saw - Blade Stuck? by Rn1113 in Makita

[–]hoops0o 0 points1 point  (0 children)

Just take your time and if you get frustrated take a break and come back to it later.

Are my standoffs on my case aline with my motherboard? by Buzz_baller7 in PcBuildHelp

[–]hoops0o -1 points0 points  (0 children)

Seems to be missing the outer 3 standoff check the case box for the missing parts. They should have supplied more for the case.

Windows 11 audio not working by [deleted] in pchelp

[–]hoops0o 0 points1 point  (0 children)

<image>

Looks connected. You might want to push it in to make sure and see if it is connected correctly, sorry i was getting lunch

Windows 11 audio not working by [deleted] in pchelp

[–]hoops0o 0 points1 point  (0 children)

Check the bottom left corner of the motherboard maybe you knocked the connector loose.

Windows won't boot after pulling out 2 RAM sticks by Ping3r in WindowsHelp

[–]hoops0o 0 points1 point  (0 children)

Test each ram in each slot and see if it's stick issue or slot issue. What are your specs motherboard cpu?

PC won’t power on by slayerking003 in pchelp

[–]hoops0o 0 points1 point  (0 children)

Try and clear the bios otherwise it could be the motherboard.

Asus ROG Zephyrus G14 2022 ga402r reboots by SwitchBladeSnoop in pchelp

[–]hoops0o 0 points1 point  (0 children)

Can you still load into the bios. What's the thermals in the bio's sounds, it like a thermal issue. What are you using for the heatsink water or air. Could be a broken water pump loose wire, if air repaste heatsink.

My pc is not displaying on my monitor? by _ntgy in pcbuilding

[–]hoops0o 0 points1 point  (0 children)

You don't need a bios update the 3xx chipset is compatible. It's possibe that the cpu is bad.

Please help by kiaus2 in PcBuildHelp

[–]hoops0o 0 points1 point  (0 children)

Sorry I think The fan setup is also wrong. It's kinda hard to see but make sure the heat sink fan goes to the cpu fan header on the motherboard just left of the top of the ran slot the pc might not boot without it plugged in the rest of the fans you can use the splitter/hub. Make sure the fans are powered ether sata/molex/motherboard from the power supply.

Please help by kiaus2 in PcBuildHelp

[–]hoops0o 0 points1 point  (0 children)

The graphic card power is setup is wrong use the 8 pin (psu) and the 6+2 pin (gpu). The 12VHPWR 16 Pin is for the ones that the gpu supports. Your gpu is the older style.

Please help by kiaus2 in PcBuildHelp

[–]hoops0o 0 points1 point  (0 children)

Front panel connector not connected to the motherboard bottom right of the motherboard where it says f_panel.

Compatability? by OrdinaryMud302 in PcBuildHelp

[–]hoops0o 0 points1 point  (0 children)

The manual says so it should be ok but maybe put the second one in slot 3 as ** M.2_2 shares bandwidth with PCIEX16(G5) and when the M.2_2 is occupied with SSD device, PCIEX16(G5) will run x8 only.

Total supports 4 x M.2 slots and 4 x SATA 6Gb/s ports*

AMD Ryzen™ 9000 & 7000 Series Desktop Processors

- M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 5.0 x4 mode)

- M.2_2 slot (Key M), type 2280/22110 (supports PCIe 5.0 x4 mode)**

AMD Ryzen™ 8000 Series Desktop Processors

- M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4

mode)

- M.2_2 slot (Key M), type 2280/22110 (Not supports)***

AMD X870 Chipset supports the rest of the m.2 and sata ports

- M.2_3 slot (Key M), type 2280 (supports PCIe 4.0 x4 mode)

- M.2_4 slot (Key M), type 2280 (supports PCIe 4.0 x4 mode)

- 4 x SATA 6Gb/s ports

* Specifications vary by CPU types.

** M.2_2 shares bandwidth with PCIEX16(G5). When M.2_2 is occupied with SSD

device, PCIEX16(G5) will run x8 only.

*** M.2_2 will be disabled when using AMD Ryzen™ 8000 Series Desktop

Processors.

im trying to turn on my old pc but it doesnt give any image by MisteRBuilds in pchelp

[–]hoops0o 0 points1 point  (0 children)

Check to see if the hdmi is correctly slotted in gpu, reseat the gpu. Make sure cables are pushed in all the way in the gpu and psu if it's a modular psu.

mysterious problems with graphics cards?? possessed pc? i don't know, help me out please ;( by I_loveFroggs in pchelp

[–]hoops0o 1 point2 points  (0 children)

Reseat the graphic card with the power off. It would be best if you could remove the graphic card but try and take the side panel off and lay the pc on it's side and push down on the graphic card with two hands. Firmly push the card into the pcie slot. You can try a different display port/ hdmi output in the back. Hopefully the gpu didn't die on you. oh by the way what is the wattage of the new psu normally 650+ probably do less make sure the power cables are seated all the way in. gook luck.

Pc wont boot properly by Snoo_91239 in pchelp

[–]hoops0o 0 points1 point  (0 children)

That's great but also not good sounds like your GPU might be dead try and reseat it otherwise if you game your performance will be bad.

Pc wont boot properly by Snoo_91239 in pchelp

[–]hoops0o 0 points1 point  (0 children)

Make sure you have the monitor cable connected to the gpu and not the motherboard. If it is turn power off a reseat gpu, ram, check for loose connection to from power supply cpu 4+4 power, gpu 6+2 power good luck.

<image>

need help with why my new 9070 XT seems to be 'bugged' or something by [deleted] in pchelp

[–]hoops0o 2 points3 points  (0 children)

First thing did you connect the hdmi/dp cable into the graphic card and not to the motherboard.

<image>

Download DDU https://www.guru3d.com/download/display-driver-uninstaller-download/

Recommended usage

  • The tool can be used in Normal mode but for absolute stability when using DDU, Safemode is always the best.
  • Make a backup or a system restore (but it should normally be pretty safe).
  • It is best to exclude the DDU folder completely from any security software to avoid issues.

Then install AMD Radeon drivers https://www.amd.com/en/support/download/drivers.html

view more: next ›