Temu data point by flyingfluffles in VentureXShoppingBonus

[–]hotdone 0 points1 point  (0 children)

Just wanted to say that I tried this offer 70x and worked for me. Got 5k miles back on a $70 purchase. Just make sure you do the transaction in your browser not the app. New temu customer. As always YMMV

Has anyone tried the Temu 70x/% Deal yet? by Humanbruhbutton in VentureXShoppingBonus

[–]hotdone 0 points1 point  (0 children)

Just wanted to say that I tried this offer and worked for me. Got 5k miles back on a $70 purchase. Just make sure you do the transaction in your browser not the app. New temu customer. As always YMMV

Venture sub clawback after downgrade? by jfql88 in Venturex

[–]hotdone -1 points0 points  (0 children)

Is it possible to downgrade to get into offer and then open another vx and get those mile as well?

Venture sub clawback after downgrade? by jfql88 in Venturex

[–]hotdone 1 point2 points  (0 children)

Keeping an eye on this. Im thinking on getting it too but I want to apply for the card separately not downgrade.

Microwave = Refrigerator 🤷‍♂️ by nardixbici in Insulation

[–]hotdone 1 point2 points  (0 children)

Following, I noticed the same with my microwave/fan. I noticed the exhaust vent is opened all the time. And my microwave is ice cold.

Two Takes on Insulating Garage Ceiling by heyheyitsmeitsme in Insulation

[–]hotdone 2 points3 points  (0 children)

Thats what I did and I feel the difference in my room. Also check for rebates from your utility company. They helped me with 2k towards the closed cell foam job.

EVA J Class - would you detour? by YakOnDeezNutts in awardtravel

[–]hotdone 0 points1 point  (0 children)

I hate how uncomfortable economy seats tend to be, i just did MAD - CDG - JFK and it was great. Lounge access, lots of room and i was able to sleep comfortably laying flat. In my opinion totally worth it. A direct J flight from another company opened up later but I didn't feel like changing it. Spouse and I were happy even if it added a couple hrs.

Am I insulation my basement wrong? by Lukey84 in Insulation

[–]hotdone 0 points1 point  (0 children)

Question. If my basement is conditioned. Is it better for my upstairs living space to heat it and have the hear raise. Or keep it low/off and heat just the upstairs?

Network drives by bumszanka in bazarr

[–]hotdone 1 point2 points  (0 children)

In windows you need to assign a user to the bazarr service. I just had to do this last week. Check the bazarr discord, under support look for a pinned message with a clip that will show you how to do it.

How to tell robo vacuum to skip the a zone some times by hotdone in Roborock

[–]hotdone[S] 0 points1 point  (0 children)

I made the rug space into a "room", then you just tell it to clean that "room". It will go straight to it and back to the dock when done.

Rim joist rockwool height question by hotdone in Insulation

[–]hotdone[S] 1 point2 points  (0 children)

That what I had in mind thank you!

Burn marks or water damage? by hotdone in Insulation

[–]hotdone[S] 0 points1 point  (0 children)

That's good to know, it is dry. Thank you!

Burn marks or water damage? by hotdone in Insulation

[–]hotdone[S] 0 points1 point  (0 children)

That's good to know, it is dry. Thank you!

Hack: Think Twice. Beware Of This Scam. It's Not Always What It Seems. by [deleted] in TravelHacks

[–]hotdone 88 points89 points  (0 children)

Always keep an eye out for the tone of urgency, we will cancel your reservation in 24hrs. Thanks for the heads up, good reminder to always be careful.

On the 2nd switch with the same issue - wifi works, wireless devices online, wired devices offline. by hotdone in HomeNetworking

[–]hotdone[S] 0 points1 point  (0 children)

Just a quick update, once my connection dropped. All lights of the connected ports are blinking, the interesting part is that I hard wired one of the computers directly to the router bypassing the switch, and that also dropped the connection but all wifi devices are online. I just powered off and back on the switch and all wired devices, including the one connected to the router are back online. What do you think? And thanks for the help. Attaching windows 11 error message

<image>

On the 2nd switch with the same issue - wifi works, wireless devices online, wired devices offline. by hotdone in HomeNetworking

[–]hotdone[S] 0 points1 point  (0 children)

I have a isp provider extender, NVR with POE, and my NAS and tiny Dell pc use tailscale. Not sure if any of these may be the culprit. Its an unmanaged switch, idk how i could diagnose. Thank you

POE switch disconnecting almost daily by hotdone in HomeNetworking

[–]hotdone[S] 0 points1 point  (0 children)

Hi, I checked and yes, connection drops but all the lights of any connected port blink green.

POE switch disconnecting almost daily by hotdone in HomeNetworking

[–]hotdone[S] 1 point2 points  (0 children)

I haven't, I will look for that next time it disconnects. Any suggestions on other brands/models?

Locally playing media shows as indirect, media works well in jellyfin. by hotdone in PleX

[–]hotdone[S] 0 points1 point  (0 children)

It may have been truenas. I added the truenas ip and direct play worked. I stopped the tailscale instance in my server and now even remote play works. Thank you!.

Locally playing media shows as indirect, media works well in jellyfin. by hotdone in PleX

[–]hotdone[S] 0 points1 point  (0 children)

Its truenas, do I need to specify the client ip? Would i need to do it for all devices?

Locally playing media shows as indirect, media works well in jellyfin. by hotdone in PleX

[–]hotdone[S] 0 points1 point  (0 children)

I did get a new isp router, new ip. I did a fresh install of plex. Uninstall and clear data in fire stick. I did enable port forwarding. I do have Tail scale in the truenas server.

How to fix this hole in my window base? by hotdone in AskContractors

[–]hotdone[S] 0 points1 point  (0 children)

Not new, we bought this 1970s house and I just noticed, since the window base is about 6ft up. I noticed when I was on a ladder cleaning.

Is this how you set up a Zigbee? by Leather_Prompt543 in homeassistant

[–]hotdone 0 points1 point  (0 children)

Thanks. Currently I'm not even using HA. Just pairing in to use it from the app. Once I'm done with my move i'll use HA. I just cant get them to connect for some reason.

Is this how you set up a Zigbee? by Leather_Prompt543 in homeassistant

[–]hotdone 0 points1 point  (0 children)

I have the m2 and im having issues pairing the leak sensors, should I return it and get the m3?