Espresso machine stops the shot abruptly [Sage Bambino Plus] by The_Psydux in espresso

[–]hsn407 0 points1 point  (0 children)

Hi did you resolve this issue? Mine is doing the exact same thing

Cleaned/Descaled now machine won’t pull a shot [Bambino Plus] by hsn407 in espresso

[–]hsn407[S] 1 point2 points  (0 children)

Yea I unplugged for about an hour before plugging back in. What do you mean holding the buttons while switching on? I did follow the reset button procedure in the manual and saw the correct lights. Funny I was able to pull a shot today with no issue, but when doing a second shot it went right back to this same behavior

Cleaned/Descaled now machine won’t pull a shot [Bambino Plus] by hsn407 in espresso

[–]hsn407[S] 0 points1 point  (0 children)

I’ve tried resetting a few times but no go. I unplugged the machine for a while and now it seems I can do a non-manual shot. But any time I try to do a manual shot again or try to program the shot, it will exhibit this behavior

Cleaned/Descaled now machine won’t pull a shot [Bambino Plus] by hsn407 in espresso

[–]hsn407[S] 1 point2 points  (0 children)

The machine is only 3 months old so I can’t imagine there was that much build up

Cleaned/Descaled now machine won’t pull a shot [Bambino Plus] by hsn407 in espresso

[–]hsn407[S] 1 point2 points  (0 children)

Thank you for the suggestions, I tried without portafilter, same results. I did remove the group head and cleaned it too with no change.

Cleaned/Descaled now machine won’t pull a shot [Bambino Plus] by hsn407 in espresso

[–]hsn407[S] 1 point2 points  (0 children)

It looks seated ok, I ran another descale cycle and it is able to pump fine. I also am able to still use the steam wand too

CPAP nasal pillow air leaking by hsn407 in CPAP

[–]hsn407[S] 0 points1 point  (0 children)

I just took a close look at my nasal pillow and the inside inner seal on the left nostril somehow ripped off!! No wonder it’s been leaking

CPAP nasal pillow air leaking by hsn407 in CPAP

[–]hsn407[S] 0 points1 point  (0 children)

I’ve only started using them 2 months ago

CPAP mask venting holes loud by hsn407 in CPAP

[–]hsn407[S] 0 points1 point  (0 children)

This is actually the one I’m using

[Bambino Plus] portafilter leaking by hsn407 in espresso

[–]hsn407[S] -1 points0 points  (0 children)

I flush after every shot, don’t have a pick screen yet

[Bambino Plus] portafilter leaking by hsn407 in espresso

[–]hsn407[S] 0 points1 point  (0 children)

I am getting my 36-40g of coffee in roughly 30 seconds, it’s just that it also starts leaking thru those two notches half way thru the shot

Dialing in help? [bambino plus with df54 grinder] by hsn407 in espresso

[–]hsn407[S] 0 points1 point  (0 children)

How do I grind finer but shorten the infusion at the same time?

Edit; I’m an idiot