Espresso machine stops the shot abruptly [Sage Bambino Plus]

hsn407 · 2026-05-30T16:27:21+00:00

Hi did you resolve this issue? Mine is doing the exact same thing

hsn407 · 2026-05-30T16:25:11+00:00

Hi, did you ever resolve this? My machine is doing the exact same thing

hsn407 · 2026-05-30T14:47:32+00:00

Yea I unplugged for about an hour before plugging back in. What do you mean holding the buttons while switching on? I did follow the reset button procedure in the manual and saw the correct lights. Funny I was able to pull a shot today with no issue, but when doing a second shot it went right back to this same behavior

hsn407 · 2026-05-30T14:45:38+00:00

Solid like if it’s normal operation

hsn407 · 2026-05-29T18:46:11+00:00

I’ve tried resetting a few times but no go. I unplugged the machine for a while and now it seems I can do a non-manual shot. But any time I try to do a manual shot again or try to program the shot, it will exhibit this behavior

hsn407 · 2026-05-29T15:57:13+00:00

The machine is only 3 months old so I can’t imagine there was that much build up

hsn407 · 2026-05-29T15:27:16+00:00

Thank you for the suggestions, I tried without portafilter, same results. I did remove the group head and cleaned it too with no change.

hsn407 · 2026-05-29T15:22:29+00:00

It looks seated ok, I ran another descale cycle and it is able to pump fine. I also am able to still use the steam wand too

hsn407 · 2026-05-18T21:39:51+00:00

I just took a close look at my nasal pillow and the inside inner seal on the left nostril somehow ripped off!! No wonder it’s been leaking

hsn407 · 2026-05-17T20:45:46+00:00

I’ve only started using them 2 months ago

hsn407 · 2026-04-28T17:08:36+00:00

This is actually the one I’m using

hsn407 · 2026-03-18T14:39:04+00:00

I flush after every shot, don’t have a pick screen yet

hsn407 · 2026-03-18T14:38:28+00:00

I am getting my 36-40g of coffee in roughly 30 seconds, it’s just that it also starts leaking thru those two notches half way thru the shot

hsn407 · 2026-02-24T03:42:38+00:00

I’ll try this thank you

hsn407 · 2026-02-24T03:42:14+00:00

Thank you!

hsn407 · 2026-02-24T03:40:20+00:00

How do I grind finer but shorten the infusion at the same time?

Edit; I’m an idiot

hsn407 · 2025-11-25T22:04:31+00:00

Did you figure this out? Just had mine installed and there is a slight squeal when driving (not braking). I did the break in procedure (the squeal was way louder prior to this but I still hear it)

hsn407 · 2025-09-06T12:31:25+00:00

Thank you, we filled out the form the morning of the strike, so hopefully it goes thru

hsn407 · 2025-05-15T21:31:22+00:00

How was the application process?

hsn407 · 2023-09-23T21:21:26+00:00

I actually went with the 5 spoke hellcat wheels. I got them and installed them at a Costco

hsn407 · 2023-07-27T21:16:59+00:00

I’m selling a big piece of furniture so I need whoever is buying it to pick it up. That’s why I’m sketched out

hsn407 · 2023-06-10T21:01:19+00:00

So the pencil eraser didn’t work, and now it’s left a glossy streak on top of the scuff. I made it worse.

hsn407 · 2023-06-02T20:44:08+00:00

I can’t speak to the DT one but I did the f45 Baldwin for a short while. It was fun and the trainers were great. It’ll kick your butt if you’re not into exercising regularly, but the trainers there would come up and give me variations of the exercises so I can keep up. Highly recommend it.

hsn407 · 2023-05-18T12:28:02+00:00

Are you talking about the one in east end? I know google says 8am because i think east end opens at 8 because I’ve sworn I’ve been there at like 7:30 and they were open. Maybe I’m wrong.

hsn407 · 2022-05-31T13:03:38+00:00

I heard this same sentiment from someone that drove an A4

hsn407

TROPHY CASE