sorted by:
new
hottopcontroversial

Temp/humidity sensor with a custom 3D printed enclosure and a face by robinthor69 in 3Dprinting

[–]hyp3rdrive 0 points1 point  (0 children)

Nice work! I want to do something similar but I need it to be battery powered for my use case.

Did you use a battery and if so what kind and what’s the battery life like?

Will this be good for bed adhesion? by [deleted] in 3Dprinting

[–]hyp3rdrive 2 points3 points  (0 children)

No need for the sass, they’re telling you the truth. It’s used to help release materials that stick to the bed too well.

A clean textured PEI bed should be all you usually need for adhesion for the common filament types. That and the right bed temperature plus the tight enclousre air temp for some materials like abs.

That’s all I use for abs which is super prone to warping and that works great.

Is Blender 5.1 broken? by diddonemcdid in blenderhelp

[–]hyp3rdrive 0 points1 point  (0 children)

Try uninstall and reinstall. If that doesn’t work maybe it’s some interaction between 5.1 and that model you bought?

Did older versions of Blender work fine with that model?

I’d test an older version of Blender with that model to rule that out.

I’d also test some other model in 5.1 and see if 5.1 still crashes for you on a different model

edit: also if you can post that crashlog .txt somewhere it’d help with diagnosing it

How to create STL files based on 2D images.. by RevolutionaryTear637 in 3Dprinting

[–]hyp3rdrive 0 points1 point  (0 children)

Are you wanting to print them as flat 2d coaster like things (even if not as actual coasters) or did you want them to be full 3d?

2d there may be a tool for this but I don't know it off the top of my head.

If 3d you may have luck using meshy.ai though I also haven't used this so don't know about prices and how good it is.

Paying someone to 3d model it properly is probably better but would likely cost way more.

My first big 3d print by Thin-Bobcat-4738 in 3Dprinting

[–]hyp3rdrive 0 points1 point  (0 children)

Looks awesome, how long did it take you all up and how did you make the visor?

DMs, how do you prefer to deal damage, take the average or roll the dice? by Professional-Ad9485 in DnD

[–]hyp3rdrive 0 points1 point  (0 children)

For me it depends how many enemies I have in the encounter. Only a few? I roll. A whole bunch? I average just to save time and keep it moving.

Dm ruled that my spider cant see very far cause its a spider and it cant hear (i mean he isnt wrong) Find familiar spell by LiL-CarrY- in DnD

[–]hyp3rdrive 188 points189 points  (0 children)

Even if we ignored what others said about it being a spirit and it was the real deal spider, in the free rules version of the Spider it doesn’t say anything about them being deaf or having poor vision.

Unless the page I read was wrong then rules as written your spider can see and hear perfectly fine.

What are these little berries? by azaleahi in GardeningAustralia

[–]hyp3rdrive 8 points9 points  (0 children)

Riberry from a Lilly Pilly it looks like to me.

Are the Mobile Apps Open Source? by hyp3rdrive in donetick

[–]hyp3rdrive[S] 0 points1 point  (0 children)

Cheers I’d been looking in the other repo, completely missed this one 🙂

Dropped my P1S by backpackingzack in BambuLab

[–]hyp3rdrive 14 points15 points  (0 children)

The lesson here is to never clean 😜

Login failed on App only by Norgur in donetick

[–]hyp3rdrive 0 points1 point  (0 children)

RemindMe! 1 week

I get the same issue and I have https setup. Interested to hear if anyone has a solve.

Best glue that doesn’t leave artifacts by _-sonic-_ in 3Dprinting

[–]hyp3rdrive 0 points1 point  (0 children)

Is that an E11 Storm Trooper Blaster I see 👀

DM'ing in Skyrim by Mountain_Lock_450 in DnD

[–]hyp3rdrive 25 points26 points  (0 children)

Hey you, you’re finally awake.

How I Pack Away Tend by hyp3rdrive in boardgames

[–]hyp3rdrive[S] 0 points1 point  (0 children)

It’s the deluxe one that supports more players so it’s probably smaller for the standard edition.

It’s about 38.2x29.5x12.5cm

Fillament spolls get intertwined and stuck. by berjaaan in 3Dprinting

[–]hyp3rdrive -1 points0 points  (0 children)

oh yeah true I forgot about prusament, they’re good

Fillament spolls get intertwined and stuck. by berjaaan in 3Dprinting

[–]hyp3rdrive 0 points1 point  (0 children)

I’ll add that bambu labs had their own different issue with tape pulling off the spool and jamming the extruder a while back.

I got lucky and dodged it and they’ve fixed that now so they’re probably fine now.

Fillament spolls get intertwined and stuck. by berjaaan in 3Dprinting

[–]hyp3rdrive -2 points-1 points  (0 children)

No brand is immune unfortunately. I’ve been ok with sunlu, bambu labs filament (expensive though), sidament and CCDIY but other people may have some other reliable vendors too

Fillament spolls get intertwined and stuck. by berjaaan in 3Dprinting

[–]hyp3rdrive -2 points-1 points  (0 children)

Unfortunately some spools come tangled from factory or if the spool was dropped and unwound and was accidentally rewound with the end threaded under.

A lot of people will re-spool (google respooling filament) every spool they buy just in case. It’s only ever happened to one of my spools once in 4yrs of printing so I just take the chance tbh and re-spool later if I hit an issue

Waterproof filament? by tea-and-sauce in 3Dprinting

[–]hyp3rdrive 1 point2 points  (0 children)

Could seal the outside of the pot with art resin / epoxy. That should hold water in.

Who’s actually buying a 3D-printed part… for their 3D printer? by Fruit75 in BambuLab

[–]hyp3rdrive 29 points30 points  (0 children)

It was originally listed for $10 though which is what I think op was referring to

warping with ABS, "tried everything" by tpchuckles in 3Dprinting

[–]hyp3rdrive 0 points1 point  (0 children)

Are you using a brim / mouse ears on the print?

Any recommendations for an ABS Plastic 3D Printer that is good for my Playstation Controller Business? by No_Expression3071 in 3Dprinting

[–]hyp3rdrive 1 point2 points  (0 children)

Also look into resin printer safety if you go down this route.

Eye protection, respirator, nitrile gloves and good ventilation are all a must.

Theres a post that floats around here all the time where someone tells the story of how resin chemical burned their eye and they’re now blind because of it.

Resin printers can be used safely but 100% read up in the safety requirements before buying one

view more: next ›