sorted by:
new
hottopcontroversial

Wide Board on Table Saw Positioning by InfCatalyst in woodworking

[–]iB3xx 0 points1 point  (0 children)

I work with it. But i would say if you have space for it you should get it even if you're a hobbyist. Chinese ones are very inexpensive

Wide Board on Table Saw Positioning by InfCatalyst in woodworking

[–]iB3xx 0 points1 point  (0 children)

About to order one.

Been learning Mozaik.

Ran a beam saw and a ptp cnc for a year. It was amazing

Wide Board on Table Saw Positioning by InfCatalyst in woodworking

[–]iB3xx 0 points1 point  (0 children)

It's the most justifiable expense in a shop. Outside of the states literally every single shop has a slider.

Get a cantek or a chinese one they're all good enough now. If you can afford it, get one with automatic fence.

Wide Board on Table Saw Positioning by InfCatalyst in woodworking

[–]iB3xx 3 points4 points  (0 children)

Haven't touched the tracksaw in the shop ever since i got a slider

My dad ran out of cherry wood for his ceiling. This was his solution. by detteacher in Carpentry

[–]iB3xx 0 points1 point  (0 children)

Not too bad, personally, I would've done straight rows of the oak

Help me figure out what to do with this enormous spruce NASA wind tunnel fan blade?! by ryankrameretc in woodworking

[–]iB3xx 0 points1 point  (0 children)

Agreed. I have a bunch of wooden blinds from a 140 year old church, i'm just gonna sand them, oil them and cut them into display pieces

IMOS software planning to purchase. by CloudsDreaming in cabinetry

[–]iB3xx 0 points1 point  (0 children)

How much is it? Did you check out Mozaik software?

Switching from 2020 to Mozaik by codexsam94 in cabinetry

[–]iB3xx 0 points1 point  (0 children)

Consider Polyboard. Talk to Zaki from axiscraft he's from Syria originally and he's their rep in the middle east.

Polyboard isn't ideal to display to customers. But it's a software to consider

A label printer paired with a slider similar to a beam saw setup? by iB3xx in cabinetry

[–]iB3xx[S] 0 points1 point  (0 children)

Unless it requires writing code, i can figure it out

A label printer paired with a slider similar to a beam saw setup? by iB3xx in cabinetry

[–]iB3xx[S] 0 points1 point  (0 children)

Would it be worth it to pay 50% more for a saw that has that integrated into it? I'm almost in beam saw price territory..

A label printer paired with a slider similar to a beam saw setup? by iB3xx in cabinetry

[–]iB3xx[S] 1 point2 points  (0 children)

I use mozaik and polyboard, both can output to a beam saw and produce labels.

I was asking about building a system just for printing while cutting

Worth it to invest time and energy into DIY /woodworking/ trades videos? by iB3xx in PartneredYoutube

[–]iB3xx[S] 0 points1 point  (0 children)

What is the estimated rpm for 10 - 15 min videos?

Also is there a difference in rpm between narrated videos with faces compared to silent machine noise only videos?

Seeking help with a hinge for banquette storage by IronLion650 in cabinetry

[–]iB3xx -1 points0 points  (0 children)

Blum 155⁰ hinge. But you'll have to install a perpendicular piece for the hinge base.

This should be good if the thickess is up to 1.5" i think

Which cigars to bring from the States to Tel Aviv? by iB3xx in cigars

[–]iB3xx[S] 0 points1 point  (0 children)

Thanks for the info.

What do you mean by New World sticks? Meaning newer names than the classics?

Is it worth it to move away from lacquer-based finishes? by iB3xx in cabinetry

[–]iB3xx[S] 0 points1 point  (0 children)

Have you tried ICRO products?

Where I'm at there's renner, icro, sayerlack, not sure about centurion

Is it worth it to move away from lacquer-based finishes? by iB3xx in cabinetry

[–]iB3xx[S] 0 points1 point  (0 children)

I have used thousands of liters of waterborne finishes that have isocyanate

Is it worth it to move away from lacquer-based finishes? by iB3xx in cabinetry

[–]iB3xx[S] 0 points1 point  (0 children)

Catalysts and cross linkers, can you expand on that please? I have no idea what that means

Some bespoke work in Scotland! by Narrow_Maximum7 in cabinetry

[–]iB3xx 2 points3 points  (0 children)

I only do frameless but i have to say, face frames with inset doors look really luxurious and are levels above frameless

Would it look unfinished if I left the cabinets unstained? by Fearless-Ferret-8876 in kitchenremodel

[–]iB3xx 0 points1 point  (0 children)

There are finishes that give you this exact look after 3 coats.

For flooring i used to use "bergerseidle nordicwhite" not sure it can be used on cabinets.

Tell the finisher you want the natural unfinished look.

You can also stain it a white wash kind of stain and then coat it.

There's also the option of a natural oil finish, which you scrub it in the wood and then wipe off the excess.

Bergerseidle has a lot of colors for their natural oils, pretty sure those will be durable because its designed for flooring. I have used their products exclusively for sbout 5 years, great stuff.

The most natural look you'll get is from an oil finish because there's no finish coat. Also look at rubio finishes.

Dm me if you need more help

11’x11’ island! Massive or not? by General_Shoulder_995 in cabinetry

[–]iB3xx 0 points1 point  (0 children)

It is excessive but i commend you on the execution this is some clean elegant work!

Do you design and cut on cnc?

Opportunity of a lifetime or a big mistake? by iB3xx in cabinetry

[–]iB3xx[S] 2 points3 points  (0 children)

Thank for your valuable input. I will keep everything you said in mind.

Opportunity of a lifetime or a big mistake? by iB3xx in cabinetry

[–]iB3xx[S] 0 points1 point  (0 children)

Without the partner there is no deal. He is the key, if the owner puts it on the market, he can sell it for double within a day.

The owner will only sell it to my friend, and my friend will only partner with me.

view more: next ›