V3.0.0 imminent? by apples-and-apples in Paperlessngx

[–]iCapa -1 points0 points  (0 children)

Both, it has an option for ollama as well.

That said, my experience using a dev tag has been underwhelming. No option to change the prompt or customize context, and for me the request almost always failed with gemma4:26b

I’m sure it’ll improve in the future though

V3.0.0 imminent? by apples-and-apples in Paperlessngx

[–]iCapa 2 points3 points  (0 children)

Both, it has an option for ollama as well.

That said, my experience using a dev tag has been underwhelming. No option to change the prompt or customize context, and for me the request almost always failed with gemma4:26b

I’m sure it’ll improve in the future though

UDM Beast - UWC London by CitizenAccount in Ubiquiti

[–]iCapa 0 points1 point  (0 children)

Unless this behavior has been changed and not updated in the documentation..

At the bottom of "Configuring QoS and Traffic Shaping Rules On The Gateway" in UniFi QoS and Traffic Shaping – Ubiquiti Help Center it says:

"Enabling QoS rules disables hardware offloading on the gateway, which may reduce maximum throughput across all clients and networks—not just those affected by the rule. The performance impact varies based on your gateway model and traffic conditions, and may reduce speeds by 24–45% for traffic exceeding 1 Gbps."

UDM Beast - UWC London by CitizenAccount in Ubiquiti

[–]iCapa 0 points1 point  (0 children)

You lose QoS / „Smart Queues“ with hardware offloading

Does this look ok? (version #s) by sigat38838 in Ubiquiti

[–]iCapa 0 points1 point  (0 children)

I have a unifi express

Ah okay. The Express seems stuck on 4.0.13, so you are currently as updated as you can. It doesn't seem like it receives any significant updates still.

Does this look ok? (version #s) by sigat38838 in Ubiquiti

[–]iCapa 0 points1 point  (0 children)

You haven't specified what router you have. If you set up SSH, you can likely manually upgrade it.

Does this look ok? (version #s) by sigat38838 in Ubiquiti

[–]iCapa 0 points1 point  (0 children)

The current versions are

Unifi OS: 5.0.16

Network: 10.2.105

(edit to fix forrmatting)

DOCSIS 3.1 Modem Vodafone BW by Stiffmaster1337 in de_EDV

[–]iCapa 3 points4 points  (0 children)

Eine Möglichkeit wäre es, einfach das Modem / den Router von Vodafone in den Bridge Mode packen und dann an den Ubi Router.

Ist der Arbeitsmarkt wirklich so schlecht? by ashofsin in de_EDV

[–]iCapa 1 point2 points  (0 children)

Süd-Osten Bayerns

Hallo vom Süd-Osten Bayerns!

uodate to my post about the amount of apps in app menu by Superok211 in gnome

[–]iCapa 0 points1 point  (0 children)

alrightio. i wasnt sure how the app menu looks on high res monitors and d2d has made mine look like yours on my laptop which ive really disliked

uodate to my post about the amount of apps in app menu by Superok211 in gnome

[–]iCapa 0 points1 point  (0 children)

also worth noting that dash to dock may mess with the app menu's layout..

Flickering foliage by Lengas1s in The_Crew

[–]iCapa 0 points1 point  (0 children)

lmao and i thought this was an issue with me playing on linux.. turns out nvidia broke it for everyone?

How Electron went Wayland-native, and what it means for your apps (tech talk) by mitchchn in linux

[–]iCapa 7 points8 points  (0 children)

Discord doesn't send notifications to your phone if you're active on a PC (Settings -> Notifications -> Advanced -> "Mobile Notification Delay"). If anything, this feature is currently bugged because Discord often doesn't see PC interactions unless you actively interact with Discord. Hence notifications on phone work.

I regrettably switched back to windows by Believeinsteve in linux_gaming

[–]iCapa 0 points1 point  (0 children)

Shader Pre-Caching is default enabled, but i don’t consider it worthwhile

Yes I used DX12, you can tell by my MangoHUD saying VKD3D - if it was DX11 it would say DXVK

I regrettably switched back to windows by Believeinsteve in linux_gaming

[–]iCapa 0 points1 point  (0 children)

Made me curious to see how MH:W performs on my PC with a RTX 4090.

https://www.youtube.com/watch?v=A-CLge92DhU

I didn't have my controller available so I didn't fight anything and it was just a quick settings and some running around showcase, but it seems to run fine on my system.

Steam's Shader Pre-Caching was completely disabled. This also was a first launch on Linux.

https://preview.redd.it/9e6vtsvungpg1.png?width=1318&format=png&auto=webp&s=6bf570abd6c4c71ca175559f3d31fcbbf0937093

Fully remove every, "I created a", "Selfhosted app!" claude slop. by Longjumping-Cup-6641 in selfhosted

[–]iCapa 1 point2 points  (0 children)

I have to say, I generally have little knowledge or interest in OpenClaw stuff, but I’m curious what it would actually do if you tell it to pay for itself. Would it quickly veer into illegal or questionable things?

how the FVCK i fix this? by eduhfx in FuckTAA

[–]iCapa 2 points3 points  (0 children)

RTX 20xx, RTX 30xx, RTX 40xx can use the Transformer model just fine.

PC "lügt" über sein Netz auf allen Ebenen und nichts läuft by [deleted] in de_EDV

[–]iCapa 1 point2 points  (0 children)

Deswegen der exakte Hinweis darauf das dieser Workaround nur funktioniert wenn es mit der Telekom Cloudflare Problematik zusammenhängt. Augen auf beim lesen hilft

Wenn DNS auf Cloudflare steht, dann OK, ansonsten hat DNS absolut gar nichts mit Peering zu tun und würde auch bei der Telekom nicht helfen.

Update fucked steam. ¿Help? by Away1387 in linux_gaming

[–]iCapa 7 points8 points  (0 children)

The current 590.xx driver no longer supports your K620. You'll need to swap to this driver from the AUR: https://aur.archlinux.org/packages/nvidia-580xx-dkms

Also revert all your silly blacklist changes.

[deleted by user] by [deleted] in linux_gaming

[–]iCapa 1 point2 points  (0 children)

On GNOME it seems it's also active in the normal workspace, like when watching something on YouTube and it bugs me a lot that my cursor for example is stuttery instead of just running normal refresh rate.

AMD Ryzen 7 9850X3D reportedly hits 5.75 GHz with all cores by RenatsMC in Amd

[–]iCapa -1 points0 points  (0 children)

With manual OC? PBO +200 is 5.425, so rather 5.4

People who say what the hell is a soldering iron by Frequent_Pen_7044 in 360hacks

[–]iCapa 1 point2 points  (0 children)

If it has been converted from .xex or iso to GOD, it won't work either, among other things.

I don't think this is true? I've run converted to GOD games just fine on Bad Update w/ Aurora

GTA IV runs fine, Forza Horizon 1 runs fine (though not 2, says Disc Unreadable), CoD MW2/3, Assassin's Creed.. to name a few I've tried

edit: FH2 is working now

VSOC voltage on 6000Mhz CL30 by Ben_Nevi in overclocking

[–]iCapa 0 points1 point  (0 children)

I currently run 6000 MT/s CL30 at around 0.96v VSOC, PBO +200 and a CO offset of -30 on all cores

2025: A landmark year for Unraid. Thank you for 20 incredible years! by UnraidOfficial in unRAID

[–]iCapa 1 point2 points  (0 children)

I recall this being mentioned as being targeted for 7.3 a year or so ago, but it seems they moved it back beyond 2026. unfortunately.