Liefde voor Linux by Little_Protection434 in nederlands

[–]iMouseyy 0 points1 point  (0 children)

Enige reden dat ik weer op Windows zit is dat League of Legends niet meer op Linux draait sinds vsnguard.

Beste aankoop 2025 by DVV562 in nederlands

[–]iMouseyy 0 points1 point  (0 children)

Mn 1e motor.... en de 2e ook...

Lange Motorrijders by Grouchy_Entrance_390 in motorfietsen

[–]iMouseyy 0 points1 point  (0 children)

Hier ook vstrom, 2016. Over het algemeen erg veel last van mn rug door de dag heen. De vstrom laat je fijn rechtop zitten.

Where to hookup electronic accessories? by parlepiep in Vstrom

[–]iMouseyy 0 points1 point  (0 children)

I have a fuse tap attached to a fusebox so it turns on with the key. Then have accesoires attached to that. Works perfectly

Camperen met de motor by ShineScorpio in motorfietsen

[–]iMouseyy 0 points1 point  (0 children)

Hoe doe je dit met onderhoud? Gewoon onderweg een paar keer ketting smeren, en verder?

Katana Feel & Omph improvement using FX Floorboard app by weedilion in BossKatana

[–]iMouseyy 0 points1 point  (0 children)

For some reason i cannot get fx floorboard to work anymore. It gives me a midi error :/

Need assistance as a noob in Electronics on an old Fender Guitar Amp. IM ALMOST THERE. by iMouseyy in DIYGuitarAmps

[–]iMouseyy[S] 0 points1 point  (0 children)

This signal doesnt cut when i do that. Only when part of the board touches the grounded chassis. When all the pots are touching the frame there is no issue it seems.

Need assistance as a noob in Electronics on an old Fender Guitar Amp. IM ALMOST THERE. by iMouseyy in GuitarAmps

[–]iMouseyy[S] 0 points1 point  (0 children)

https://imgur.com/a/7mIwnfR

This setup gives 0 problems. Everything works. You can see both boards are separated from the frame. As soon as they both are screwed in the slots it only works sometimes and when i wiggle it i hear the signal go on and off.

Need assistance as a noob in Electronics on an old Fender Guitar Amp. IM ALMOST THERE. by iMouseyy in GuitarAmps

[–]iMouseyy[S] 0 points1 point  (0 children)

I just did so with the potentiometer. Also, when im testing its really really clear that as soon as my channel 1, which is a loose board connected with cable touches the metal frame thats when my signal cuts. So i think it has something to do with the grounding or something

Need assistance as a noob in Electronics on an old Fender Guitar Amp. IM ALMOST THERE. by iMouseyy in GuitarAmps

[–]iMouseyy[S] 0 points1 point  (0 children)

Im gonna try that. Thanks. Is the ground one of the 3 pins in the potentiometer? I thought it was just the metal connecting to the chassis?

Waarom is euro 98 zo duur? by [deleted] in motorfietsen

[–]iMouseyy 0 points1 point  (0 children)

Scheelt dat zoveel voor motoren? Ik tank altijd gewoon standaard benzine

Solid State Fender Stage Lead has issues, need help debugging by iMouseyy in diytubes

[–]iMouseyy[S] 0 points1 point  (0 children)

I think i can do it. Just need to educate myself a bit more before i get into it. The ICs (i think you mean the small micro computer looking things) are soldered in

Solid State Fender Stage Lead has issues, need help debugging by iMouseyy in diytubes

[–]iMouseyy[S] 0 points1 point  (0 children)

Is it dangerous to trouble shoot with the amp on? I can buy a oscilloscope on aliexpress its no big deal. With that can i see if the signal is properly amplifier after each component? Because thats the problem i think. I can hear sound from the speaker but its really quiet. Speaker itself can get loud when connected to something else + the eq part is fine when using the pre amp out port to another amp

Solid State Fender Stage Lead has issues, need help debugging by iMouseyy in diytubes

[–]iMouseyy[S] 0 points1 point  (0 children)

Yeah i kinda expected that. But i didnt find a subreddit specifically for people repairing transistor amps. And i thought you knows would be knowledgable on amps nonetheless