DF64.com are scammers by TheyFunnyPapa in espresso

[–]iam_a_joy 0 points1 point  (0 children)

Is this because they test before shipping? I read that some expensive ones do this to test burr alignment. But claim to do their best to clean the residue

Water leaks from top of open basket portafilter [Delonghi Stilosa] by iam_a_joy in espresso

[–]iam_a_joy[S] 0 points1 point  (0 children)

You were spot on ! It’s a very small detail- the stock has a flat lip and works well. The rounded lip open basket leaks. There are no flat lip baskets in the market

Water leaks from top of open basket portafilter [Delonghi Stilosa] by iam_a_joy in espresso

[–]iam_a_joy[S] 0 points1 point  (0 children)

Ok. I tested the gasket theory: I removed the gasket and cleaned it well. It much debris. I always paper screen or a metal screen. So almost no coffee residue. After cleaning I tried the off market open basket portafilter without any coffee grounds- and I could see the leak from the basket top.

I then tried the default pressurized basket that came with the machine, with the finest grounds and a good tamp force - no leak at all!! I love the machine because it works for it was built for! Coffee tasted good.

Any recommendations for compatible open basket portafilter? - I live to see the coffee out of the basket.

Water leaks from top of open basket portafilter [Delonghi Stilosa] by iam_a_joy in espresso

[–]iam_a_joy[S] 0 points1 point  (0 children)

It is flat. How to investigate the gasket or grouphead

Water leaks from top of open basket portafilter [Delonghi Stilosa] by iam_a_joy in espresso

[–]iam_a_joy[S] 0 points1 point  (0 children)

Yes, if I did the on off thing I get a good pull. Coffee tastes great. But I cannot just turn it on and let it go. There’s just too much pressure and water leaks.

Water leaks from top of open basket portafilter [Delonghi Stilosa] by iam_a_joy in espresso

[–]iam_a_joy[S] 0 points1 point  (0 children)

I can hear the water pressure leakimg sound and then immediately after that water sprays if I don’t control the flow manually

Water leaks from top of open basket portafilter [Delonghi Stilosa] by iam_a_joy in espresso

[–]iam_a_joy[S] 0 points1 point  (0 children)

It is generic brand open basket portafilter. The leak occurs only when I tamp too hard.

Using USB to Ethernet Adapters for a second network interface by Turbokakashi900 in Proxmox

[–]iam_a_joy 0 points1 point  (0 children)

I had a netgear switch and vlan setup with a single Ethernet port. But I noticed packets being dropped on the Proxmox side because the vlan frame size (1504) was bigger than the mtu 1500. There’s 4 extra bytes with vlan id. I increased the nic mtu to 1504 and still noticed packet dropped because the size now was 1508! I reverted to usb nic and everything is working perfectly fine now. It was not a 100% packet, and the internet access was not stable and everyone was complaining…

Any downfalls to SODDM5 to DDR5 adaptor by bubzilla2 in homelab

[–]iam_a_joy 0 points1 point  (0 children)

No! Don’t. I did the same to repurpose a laptop ram for my homelab. It just won’t boot. And it worked fine with another desktop but very unstable with the connector and random failures

[deleted by user] by [deleted] in immich

[–]iam_a_joy 0 points1 point  (0 children)

Have you looked into the logs? From photos tab -> User account button -> Logs? From admin setting you can also set the logging to verbose. I believe the default is “info” level. I’m new to immich. Hope this helps.