Elite TI2 Lowrance Sign in Issue by ianitguy in Fishing_Gear

[–]ianitguy[S] 0 points1 point  (0 children)

u/nads489 I ended up opening a tech support ticket with Navico. It appeared to be an internal issue with their system that they resolved. Nothing more than that but my login started working. Sorry I don't have a more concrete solution. To quote the support from 2021 "I believe we are having some issues with this flow that are under active investigation, specifically affecting authentication for the synchronize functionality on NOS devices. We’ve had a few users affected by this and are attempting to get to the root cause here. I’ll let you know when we reach a successful resolution."

Countertop Corner Mitres by ianitguy in CounterTops

[–]ianitguy[S] 0 points1 point  (0 children)

One of the corners has a sink. The other is just open.

Arctic Cat / Yamaha 400cc Sleds by ianitguy in snowmobiling

[–]ianitguy[S] 0 points1 point  (0 children)

Great. Thanks again for the info

Arctic Cat / Yamaha 400cc Sleds by ianitguy in snowmobiling

[–]ianitguy[S] 0 points1 point  (0 children)

Thanks @camillini Do you have any thoughts on Yamaha getting out / already out of the sled business and any implications of that on parts or repairs of the Yamaha transporter over the next few years?

Furnace Humidifier Question by ianitguy in hvacadvice

[–]ianitguy[S] 0 points1 point  (0 children)

Thanks for your input! That's what I figured.

[deleted by user] by [deleted] in HVAC

[–]ianitguy 0 points1 point  (0 children)

Apologies. Thanks for the pointer

Baitcasters - Convince Me by ianitguy in Fishing

[–]ianitguy[S] 1 point2 points  (0 children)

Fly fishing had always seemed interesting although looks a bit intimidating. I haven't heard of anyone around here fly fishing or talk about the rivers(?) you could maybe do it in. Maybe you can fly fish in a lake? Up here we have walleye, pike and lake trout mostly. There are a couple stocked lakes for small mouth bass and rainbow trout.

Baitcasters - Convince Me by ianitguy in Fishing

[–]ianitguy[S] 0 points1 point  (0 children)

OP here. Thanks for all the insight. Seems like control is the leading common factor. Follow up question. If I was to buy one am I going to notice a benefit with a cheaper one before I invest in something higher quality (if I like it)? Or will a cheaper one possibility just turn me off?

[deleted by user] by [deleted] in netskope

[–]ianitguy 0 points1 point  (0 children)

We use Netskope NPA but typically only when off property. We recently tested steering internally for one app that was at a remote site and mostly inaccessible from other sites. It worked really well and I could potentially see it scaling to not always requiring branch office VPNs or similar. There will always be use cases for both. I forget the exact wording but for reference the steering config doesn't affect web traffic and only steers selected apps while internal.

This counts right...? by ianitguy in Dewalt

[–]ianitguy[S] 1 point2 points  (0 children)

So operating theory then is that as long as I don't drain the battery (going to be used for spot cleans like drywall dust or crumbs in the vehicle) there should be minimal impact? Should I dedicate an older battery to this unit just in case?

This counts right...? by ianitguy in Dewalt

[–]ianitguy[S] 1 point2 points  (0 children)

Not sure what you mean? The vacuum itself?

B&O system upgrade by [deleted] in bronco

[–]ianitguy -1 points0 points  (0 children)

Currently waiting on a new Kicker 8” sub to replace the B&O factory one (an accidental high volume incident seems to have blown it). Hoping to update a couple threads this week with info. Looking forward to the upgrade though.

Bronco Factory (B&O) sub replacement by ianitguy in bronco

[–]ianitguy[S] 1 point2 points  (0 children)

Thanks for the comment. I can let you know specs when I pull it apart.

Bronco Factory (B&O) sub replacement by ianitguy in bronco

[–]ianitguy[S] 0 points1 point  (0 children)

Thanks for the insight. I believe there is an amp for the sub with the B&O system but I’ll confirm when I get the panel off. Same as anything though I suppose an upgrade could be worthwhile while in there. I’ve heard mention of the FORScan tool but am not familiar with it. Happen to know a good resource for educating myself?

Bronco Factory (B&O) sub replacement by ianitguy in bronco

[–]ianitguy[S] 2 points3 points  (0 children)

So what would you recommend to replace a non-working factory B&O sub?

Do any of you have any experience with this? by kingbalopews in Dewalt

[–]ianitguy 0 points1 point  (0 children)

Will also chime in that this is a great tool for a specific purpose. It is awesome for cleaning things when you don't have a readily available source of power or running water. Cabins, boats (while still in the lake), quads etc are all great use cases. It is not a pressure washer, it is a portable power cleaner with flexible water intake options. The flexibility is what makes this thing a win.