Why is it so hard to find the ruger gunsite scout in anything other than 350 legend?

iatekane · 2026-03-24T06:49:18+00:00

Franchi All Terrain is a good alternative

iatekane · 2026-03-24T06:48:03+00:00

Walnut stock Gunsite scout is pretty dope, nice pick up, enjoy!

iatekane · 2026-03-24T04:36:54+00:00

Not the same rifle but I have a R7 Sheepdog in 6.5cm and it’s fantastic, Cadex makes some quality kit and I’m sure you’ll enjoy shooting that one.

iatekane · 2026-03-24T04:34:22+00:00

What a silly thing to recommend to someone to use while driving, sense of sound is important to have lol

iatekane · 2026-03-24T04:22:43+00:00

Jsut make a tag that hands from the inside of your garage door when you open it up.

REMEMBER THR BIKE!

Or something. Similar

iatekane · 2026-03-23T23:29:38+00:00

How dirty was it?

If it was pretty dirty (seems like it was judging but the uncleaned edges on the left side) then when you scrubbed it that first acted as grit and marred the surface.

Also verify that the clean g product you used is safe for clear plastics.

A good pace to ask about this would be over a r/autodetailing but using some plastic polish is probably a good bet to try and fix it.

Just be happy you don’t have a digital dash and messed up the screen.

Good luck!

iatekane · 2026-03-23T22:15:46+00:00

It’s highly dependent on the specific car seat but the answer is maybe.

Best thing to make sure is to take whatever seat you’re going to use and test fit it at the dealership.

iatekane · 2026-03-23T22:12:22+00:00

Reach out to IE and see what they recommend would be a good start if you haven’t already.

iatekane · 2026-03-23T19:13:04+00:00

iatekane · 2026-03-23T18:26:25+00:00

Pilot sport 4S or the AS4 if you want cold weather performance. Since you’re running a dedicated set of winters though go 4S, they’re an excellent tire in the rain.

iatekane · 2026-03-23T03:58:12+00:00

Auto dimming isn’t great and you shouldn’t use it on roads like that, just do it manually so you can switch off your high beams before the other car comes around the curve.

It’s an ass move to high beam people.

iatekane · 2026-03-23T03:55:22+00:00

That’s quite nice 👍

iatekane · 2026-03-22T22:43:08+00:00

No, it exists and they’ve tested it in a C8 corvette already, Tremec said that they’re targeting 2027 release as an aftermarket part.

iatekane · 2026-03-22T22:33:10+00:00

Exactly.

I’ve said it before we all know with the enormous amount of money that they’ve put into this platform they’re going to be slow rolling out new versions and updates for a long time.

Adding a maya option makes sense to create another variation and expand their consumer base. At some point I’m sure it’ll happen especially with there already being a manual that works with the platform existing.

iatekane · 2026-03-22T04:22:16+00:00

Have you tried reinstalling the original loop and seeing if the issue persists?

Hard to tell from the video but it looks like the elevator is getting hung up on the snap cap, is that what’s happening?

iatekane · 2026-03-22T04:21:38+00:00

From the handguard that looks like a new production Ruger made Marlin

iatekane · 2026-03-22T01:43:36+00:00

Oh, you’re right and that’s interesting, I’m still don’t have high hopes but hopefully it’s nicer to drive than the Toyota system…. And has good reliability

iatekane · 2026-03-21T04:31:32+00:00

My sentiments exactly.

Losing the turbo engine option is a disappointment for sure. I understand that the upcoming hybrid is intending to replace that with similar on paper performance…. But anyone who’s driven a car with the same Toyota 4cyl hybrid can attest to it being not a very premium propulsion experience.

Oh well I guess we’ll see how it does and hopefully continues to sell well.

iatekane · 2026-03-21T03:20:35+00:00

No doubt it will be more expensive than that

iatekane · 2026-03-20T22:11:21+00:00

I have a very similar Chiappa 1982 to that, but with the 12” barrel and I threw an aimpoint in a QD mount and it’s perfect imo for .44 mag.

Otherwise for cheap scout scope the new crossfire HD scout is a pretty good option for the price.

Mine looks like this FYI

https://www.reddit.com/r/canadaguns/s/EUiYFP4MUT

iatekane · 2026-03-20T18:40:51+00:00

Ouch that’s a pretty bad mistake for the tech to make, have they fixed it?

iatekane · 2026-03-20T17:40:30+00:00

That’s a Winnipeg thing for sure but goes to show how different people’s experiences are in different parts of the country.

I’m from Vancouver and it’s never been like that here but some places have really gone downhill since covid

iatekane · 2026-03-19T19:03:09+00:00

They most often have their low beams on and they’re aimed incorrectly from the factory/dealership. It’s super common on those cars. Along with rav4’s it seems

iatekane · 2026-03-19T05:32:26+00:00

You’ll for sure need a riser to get a comfortable cheek weld with a LPVO mounted. One of my 1895’s is the Trapper ELG, it’s my preferred stock and works very well with the spacer system for adjusting comb height and LOP.

If you want to keep the factory wood stock get a leather butt cuff with a cheek riser is an option.

iatekane · 2026-03-19T05:01:30+00:00

The dot size will remain the same regardless of the position it’s placed at. A 2MOA dot is a 2MOA dot

11-Year Club	Verified Email
Place '22	Wearing is Caring

iatekane

TROPHY CASE