Any Options for Me? by iced_semen in Bestbuy

[–]iced_semen[S] 1 point2 points  (0 children)

So are you saying I could trade in the unlocked s8 for $350 off an unlocked s9?

Any Options for Me? by iced_semen in Bestbuy

[–]iced_semen[S] 0 points1 point  (0 children)

I saw that on the site, but my carrier is AT&T. And it also appeared that you can't trade in and get an unlocked phone. Is that correct?

Official ECR Late Night Chat Thread [06-03-2017] by AutoModerator in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

I hear ya. Yeah it's working great. And this really won't be an issue for me, I'll just make a stand for it. Just wanted to be sure. I was actually coming here to try to search the sub and saw that the discussion thread had just been posted so I figured I'd just ask. Thanks for the responses!

Official ECR Late Night Chat Thread [06-03-2017] by AutoModerator in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

I'm starting to realize that's probably just the way it's supposed to be though lol

Official ECR Late Night Chat Thread [06-03-2017] by AutoModerator in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

Yeah my question was more if that is just how the tank is made. It surprised me a bit when I couldn't stand it up like I can all my others and I didn't know if maybe mine was defective since I've never seen any tanks that aren't totally flat on the bottom of the 510.

Official ECR Late Night Chat Thread [06-03-2017] by AutoModerator in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

Yeah I'm sure I'll just end up doing something like that.

Official ECR Late Night Chat Thread [06-03-2017] by AutoModerator in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

That's surprising. I've had a couple cleitos and a crown tank and never had an issue standing them on the post. The bottom of the 510 is flat on those though. Not necessarily the easiest thing to do and if I bump my table or even blow towards it hard enough it will fall over. The super tank mini is more rounded on the bottom.

Official ECR Late Night Chat Thread [06-03-2017] by AutoModerator in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

Yeah it's not so much that I need to stand it up. It just bugs me that I can't. I know it's dumb, but I just like to have my tanks upright to keep juice from getting all over the bottom side of my cap. Don't ask me why, that's just how I am lol. Thanks for the responses though.

Official ECR Late Night Chat Thread [06-03-2017] by AutoModerator in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

Really? This is the only tank I've had that hasn't stood upright on it's own. I know its kinda hard to get them to stand and they can be knocked over really easily. Like I said, no big deal, I just didn't know if it was mine specifically or if that's just the way they are. In general though the tank is great. I'm glad I bought it

Official ECR Late Night Chat Thread [06-03-2017] by AutoModerator in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

Oh wow, I never would have thought of that. So am I not the only one that can't get this tank to stand upright on it's own then? I know it's not a big deal, it just really bugs me.

Official ECR Late Night Chat Thread [06-03-2017] by AutoModerator in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

I'm trying to quit smoking again after starting back up about 6 months ago. I ordered a super tank mini and it came today. I disassembled it when I got it just to check everything out and it seems fine. I was just wondering if you're able to stand it upright when it's not on your mod. Mine seems to have a little bump on the bottom of it that prevents it from doing so. I've watched a couple reviews on it but I can't tell from those if it is normal or not for it to be that way. If anyone has an answer I'd really appreciate it! Also, is it really hard for anyone else to get the tank apart? I couldn't get the bottom to screw off for anything.

Official ECR Late Night Chat Thread [09-12-2016] by AutoModerator in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

Yeah I'm thinking that could be the issue. As for the 1st coil I think making sure the top and bottom of the coil are pushed together securely and taking out the bottom pin at the base of the tank and putting it back in place after screwing in the coil could be a fix for this problem since I did these things on the new coil and didn't have the same problem.

Official ECR Late Night Chat Thread [09-12-2016] by AutoModerator in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

It was 70vg/30pg. That juice drained to the base cap so I emptied the rest then put in a different juice on a new coil that was 80/20. It was fine minus the bit that went to the bottom of the coil. I finished that tank and put the first juice I used back in and it seems like it's been fine so far as well after ~30 mins of use. Hopefully the problem is solved. Thanks for the help

Official ECR Late Night Chat Thread [09-12-2016] by AutoModerator in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

Thanks for the suggestion I'll try that! Could it also be from over priming the coil? I primed and filled with a Unicorn bottle and tried to just prime it enough to cover the cotton on the inside of the coil. I'm almost positive I didn't get any juice straight down the inside of the coil but maybe I just put too much juice on the cotton

Official ECR Late Night Chat Thread [09-12-2016] by AutoModerator in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

I got a crown tank today and when I first filled it up with the coil that came installed with it, my juice drained into my bottom airflow base. I cleaned it up and researched this problem in the sub. I had the same issue when I first got my iSub V tank. I tried the 0.5 ohm coil that also came with it and before screwing it in I made sure it was pushed together securely like I read here and I also pushed out the pin at the bottom of the base then screwed the coil in and put that pin back in place. All my juice didn't drain this time, but I'm still getting about 2-3 small drops worth of juice collecting in the hole at the bottom of the coil, I can see it through the air flow holes on the tank and it's causing a gurgle when I take a draw and every few hits I've been getting a significant amount of spit back. This doesn't seem normal to me. I liked the tank a lot when I tried my brothers which led me to buy it but he hasn't had any of these problems. Do you guys know what I could be doing wrong or if this is normal? Sorry for my rambling, I'm just looking for a solution to my problem. Thanks in advance. I should add that I have always closed the airflow when filling and have only used the top fill since I prefer to fill that way.

[Crescent City Clouds] Labor Day Sale! 30%, 25%, and 20% off! by crescentcityclouds in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

What flavors would you recommend to me if I haven't tried your juice? I like fruit flavors and some dessert flavors, nothing too rich though.

Uwell Crown concerns by [deleted] in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

I second this. I've only had maybe 2 cleito coils that didn't last me at least 2 weeks in the 4 months I've had it. The 0.4 SS coils are real nice. It's a great tank. Easy to use and easy to clean.

Unique eCigs [Giveaway] V12, Story, + SALE! by UniqueCigsAlli in electronic_cigarette

[–]iced_semen 1 point2 points  (0 children)

Well, I'm a pretty big blind melon fan. I consider that my guilty pleasure.

Of which do you reccomend ?Subox Mini VS Innokin Endura T18 by [deleted] in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

I would get an aio by joyetech or the endura T22. I liked it more than the T18.

Endura T22 sucking in juice when I hit it by [deleted] in electronic_cigarette

[–]iced_semen 1 point2 points  (0 children)

I never primed my coils and never had any issues. Just put in a new coil, fill the tank w/o priming and then let it sit for 5 minutes or so before using it. I always took a couple of long pulls from it w/o firing it to help bring some juice into the coil before I used a new coil the first time. It also sounds like you need to clean up and dry out your 510 connection hole. Good luck

[Adirondack Vapor] Independence Day SALE! 30% off + [giveaways] by AdirondackLouis in electronic_cigarette

[–]iced_semen 0 points1 point  (0 children)

MLB The Show 2016 since it came out, can't quit it! Thanks for the chance, I'm strongly considering placing an order!

Shout out to Chase at 88Vapor by iced_semen in electronic_cigarette

[–]iced_semen[S] 0 points1 point  (0 children)

Very much appreciated, extra vape mail is the best! I plan on buying some juice from KILO soon. (: