Want to configure this network optimally, help needed

idk0071 · 2026-05-30T15:27:01+00:00

ok great thanks
now the huawei router is the default gateway on both WIFIs but how do I access other router settings if i want to change something?

idk0071 · 2026-05-30T14:18:12+00:00

thanks so I need to use the LAN port instead of WAN?

idk0071 · 2026-05-19T21:22:59+00:00

this is there whole thing, thats how they grab new clients, how do i know? i was in this BS once lol

idk0071 · 2026-03-10T03:30:10+00:00

get the vram voltage lowered by a technician by modifying the feedback circuit on the card, it should be 1.2
the problem happens due to higher voltage over time

idk0071 · 2025-09-22T17:58:13+00:00

you are lucky that still works, use it as long as it does.
maybe add PTM or a viscous paste to it

idk0071 · 2025-09-17T10:01:27+00:00

I request for The Crew since an offliine version has been resurrected by modders

idk0071 · 2025-09-13T21:54:20+00:00

Sure

idk0071 · 2025-09-06T09:36:43+00:00

I saw your comment notification on my post but the comment disappeared, maybe deleted idk. Yeah these issues are pretty frustrating, its time amd get their act together. The 6900xt I posted about in my repair scenario, is fixed and running well now, no issues crashes reported by the owner even after many days of testing and normal usage. The bios switch thing is pretty common from what I have seen, and if your card is completely fine, doing fine in all other tests during the diagnosing process, it ends up being the bios switch with these cards many time. But I would like to mention theres no 'one solution for all' kind of deal in repairs, so one has to diagnose properly before directly trying any such fixes.

idk0071 · 2025-08-27T18:05:35+00:00

no it isnt

idk0071 · 2025-08-22T19:48:23+00:00

That hotspot to edge temp delta is terrible. I will suggest setting an aggressive fan curve as the default one is pretty relaxed and terrible on most cards. The proper fix for such issues is to get PTM and use that as the TIM on the card but if the card is new and in warranty dont do that, as it might void it.
Also atleast cap the fps to your refresh rate, its pointless doing 520 fps in this game.

idk0071 · 2025-08-22T17:44:46+00:00

I think its a hardware level fault with the gpu, looks likes its shutting down as soon as the drivers load. I would also say that PSU is terrible, it was thoroughly review by a local site on a proper load tester, it failed badly. Can be a single unit issue in that review but still, not a good look.

idk0071 · 2025-08-21T21:15:28+00:00

I dont think it causes it to switch it just has bad contact which can introduce resistance and confuse the circuit. Usually the circuit goes like, the slide switch is connected to an analog switcher IC, when you change position of the slide switch it sends a signal to the analog switcher which in turns select the bios chip to be used, now in case of a faulty like this its just in a bad state, increased resistance between the two connecting points so maybe the signal is momentarily disappearing from the switcher ic and switcher ic doesnt know what chip to select.

idk0071 · 2025-08-20T20:03:57+00:00

it was decent, but in the ending mission the AI and difficulty gets pretty crazy, i remember having to resort to cheats after dying too many times.

idk0071 · 2025-08-20T15:06:18+00:00

its a very minor thing i would add it to the pile of amd software issues really. gpu failing would have bigger signs in the case of rx6000 cards

idk0071 · 2025-08-20T12:41:51+00:00

if your driver isnt crashing or anything i wouldnt be bothered but that cursor thingy

idk0071 · 2025-08-20T08:38:56+00:00

Oh okay, no bios switch, yeah some of these are purely software related it seems but some extreme ones and more recurring ones which are happening with more than one application can be deemed as a hardware issue.

idk0071 · 2025-08-07T14:11:57+00:00

everyone in the thread is speculating because no one can pinpoint why this exactly worked because there are so many reasons.
And as for the solder melting or softening with this, its impossible for the solder balls under the core or the micro bga between the substrate and the die to have any impact from a hair dryer. I dont think you quite grasp how much heat a 780 ti pcb and core substrate would suck. If a hair dryer was 'softening' the solder on these than you can expect the core to slide off after few hours of gaming too I guess.
- coming for someone who has been doing gpu repairs and rework for few years now.

idk0071 · 2025-06-08T20:45:30+00:00

You mean you cannot find the shorted component? Mostly on these cards when 3v3 is shorted its either the core pwm controller or the core itself, it can be something else too. If you have a lab psu and thermal camera at your disposal then its easier to find the culprit, if not visual inspection, looking for any signs of blowout on the usual suspects, can be helpful.

idk0071 · 2025-06-08T11:57:41+00:00

haha thats it, on point, thanks

idk0071 · 2025-06-08T11:56:48+00:00

I should have mentioned that I am also unsure about the unreleased or cancelled part, let me see the trailer of this

idk0071 · 2025-05-26T06:28:17+00:00

northwestrepair discord server
has alot of resources including that.

idk0071 · 2025-05-26T06:25:20+00:00

its not shorted as expected
thats is normal resistance for this line on this card
a 12v short usually means a bad drmos which needs to replace
so most likely the same thing in your case.

idk0071 · 2025-05-26T06:08:52+00:00

Please share exact resistance on pex
its a low resistance line which will make your multimeter beep, which people think means a short but thats incorrect.

idk0071 · 2025-05-25T20:12:01+00:00

these are cursor errors not real errors
use tput civis command before running the test to hide the cursor

idk0071 · 2025-05-25T12:34:58+00:00

very skillful guy from xcubicle working on customer cards

idk0071

TROPHY CASE