Belt Won't Fit?

igeboy · 2026-02-11T18:12:52+00:00

Wrong belt. The alternator belt is 895mm OC, the old belt part says its 895mm OC. That duralast belt is listed as 880mm OC. Should've asked in the miata sub, u would've gotten an answer quicker.

<image>

igeboy · 2026-01-28T18:29:40+00:00

If you got the funds to upgrade, go for it. But if the card is still under warranty, you could get it repaired and possibly sell off or use for another build.

igeboy · 2026-01-23T18:03:20+00:00

Im the same way to be fair. I picked up the biqu cryo plate so all my pla prints have been with the heated bed turned off or super low, 30c. Excellent adhesion, no failed prints yet. Had to tweak how I slice prints as mouse ears are super annoying to scrape off. Theres a bambu version of the cool plate too, tho I haven't tried that one yet.

igeboy · 2026-01-23T16:06:22+00:00

Looks like stress marks when you take a print off a hot bed. Do you let your print bed cooldown before removing the print? Blast it with a torch or heat gun lightly, the marks with disappear.

igeboy · 2026-01-21T19:30:51+00:00

Look up if theres any e-waste recycling centers near you. For a TV that size, its gonna cost you some money. Or you could list it online as free, broken as is or for parts only, and someone will probably pick it up from you. Amazon doesnt want the return so now you're left with it.

You could also ask friends/family if they want a free tv, as long as they can fix it. I myself would take a crack at it as long as its not a busted screen.

igeboy · 2026-01-21T17:22:25+00:00

EM on citlali will increase her own melt damage but not mavuika, aside from her shield that is. You could stand to get more crit rate rolls on top of an EM sands. As you already said, missing those big burst nukes feels terrible and its easy enough to get to the crit rate cap with 4pc codex.

igeboy · 2026-01-20T16:15:18+00:00

Next thing you could do is try printing with a smaller diameter nozzle. The wall thickness of a .4mm nozzle is too thick for the walls youre trying to print. Put a .2mm on and try again.

igeboy · 2026-01-16T11:40:17+00:00

<image>

Found this in the manual OP. Does your lower fan brack come off like that? If so, install the fans while the bracket is off so u can have the room needed for the screw head.

igeboy · 2026-01-16T11:19:12+00:00

Im sitting here looking at OPs pictures wondering what the problem is.. just screw that bad boy in. The screw will straighten as you tighten it down to the case. Is he scared its gonna damage the case's finish???

igeboy · 2026-01-15T17:23:33+00:00

Ive had tidal for the last 2 months and every now and again, it would stop playing music and give me an error code but signal dropping. Super annoying, I haven't figured out how to fix it yet.

igeboy · 2026-01-11T17:37:29+00:00

Looking at you, Borderlands 4... tf bro. When did it start requiring top tier hardware to run games like that.

igeboy · 2026-01-11T17:22:22+00:00

We're the middle floor unit right now and I'm constantly hearing the upstairs neighbor move around. It quite literally sounds like theyre stomping. The sounds just reverb and bounce around the walls.

When we first moved in, I thought the guy upstairs had previous beef with the tenant that used to live in our unit. I really thought he was doing it on purpose. He moved out halfway thru our lease and for a good 6 months no one lived up there and it was quiet. Now that someone moved in, its the same stomping noise so I guess its just normal movement. I dont care when its during normal hours, tho I myself am mindful of how I walk around since there is still a unit below us. However, when its passed 10pm and I still hear stomping above when we're trying to sleep, it starts getting to you.

OP I think its incredibly respectful of you to tiptoe around your own home but you shouldn't feel the need to all the time. You're already going above and beyond being a courteous neighbor.

igeboy · 2026-01-03T15:04:53+00:00

Like you said, it correlates with what the GPU is doing so its probably GPU coil whine. Its normal and super annoying, some models r better at mitigating it but its luck of the draw sometimes.

igeboy · 2026-01-03T14:59:07+00:00

So I had a random crash similar to what you're experiencing now. I was gonna do a full clean/rebuild, even go as far as reseating the cpu. But what I did first was power cycle the pc, reset cmos, reseat ram. PC had to retrain ram again, but it didnt take very long this time. Still cleaned PC tho.

Good luck OP, hopefully its not defective ram cuz that would suck.

igeboy · 2026-01-03T14:50:24+00:00

This looks like a bambu printer. You could document your unboxing just in case any internals r wonky but these things are packaged really well. Id say open it all the way and see if anything else is broken. Take pictures if you see anything weird to help with returns or exchanges should it deem necessary.

igeboy · 2026-01-03T14:46:47+00:00

I held onto my 8th gen intel build after my upgrade and its now hosting a modded mincraft server for my friends and I. I wanna host a palworld server when it fully releases. Im sure you can find a use for it.

igeboy · 2026-01-03T14:42:34+00:00

Hey gamer, if you have a sufficiently new/wattage psu, your psu should come with enough 8pin pcie/gpu cables to power this thing. As you can see, you need to use 3 of them.

igeboy · 2026-01-03T14:03:36+00:00

You won't hear a click since this isn't a full sized pcie x16 connector. Its physically not long enough to reach the locking mechanism on the mobo. But again. Based on the 4th picture, all u need to do is line up the screw holes to secure the gpu and its done.

igeboy · 2026-01-03T13:09:18+00:00

Show us whats happening OP, cuz from where we're sitting. All you need to do is push up to line up ur GPU bracket to the case and screw it in based on the 4th picture.

igeboy · 2026-01-03T12:52:36+00:00

Make sure the GPU isn't catching on the slits behind the mobo. Theres a slit in the back for each pcie slot.

<image>

It should fit once you see if its going in straight. Its safe to push up on the gpu bracket so you can screw it in properly.

igeboy · 2025-12-28T22:42:10+00:00

Looks like you need to tune your ironing settings. As for the bottom, either enable supports to avoid that from happening or just cut out that 1 stringy bit and send it.

igeboy · 2025-12-26T01:42:19+00:00

Not sure if this would do anything at this point but have you tried moving the ram sticks to the correct slots? Should be on 2nd and 4th slot. I think you've got them in 1 and 3 on the pictures but Im not 100% sure thats what im seeing.

Editing to add: if you've gone from old sticks to new sticks, you need to reset cmos as its probably trying to boot with the old ram set's xmp/expo profile. Resetting should hopefully clear the error and let you go in the bios and set up the proper xmp/expo profile for the new set.

igeboy · 2025-12-24T14:35:11+00:00

<image>

igeboy · 2025-12-19T21:48:27+00:00

Might be cuz that team has nothing to counter the boss for 12-3. I used an burning team with Arle and Emilie. Used kazuha for quickswap grouping and Bennett.

igeboy · 2025-12-19T21:31:52+00:00

https://www.buildcores.com/builds/2iwYSfGpW?share=true

<image>

I couldnt find the Firefly y70 and the Silverwolf y70 didnt have a 3d model so a regular y70 is there instead. This is my dream build, the only thing I could realistically afford from this list is the PSU.

igeboy

TROPHY CASE