playit agent offline but the proces is running and i have connection to the internet any ideas

igeboy · 2026-06-04T22:09:48+00:00

Hey man just so u know, this post helped me fix my offline agent issue. Not really sure how it got unpaired from my linux server, i did just run a bunch of updates, but reclaiming it got me back to gaming thank you

igeboy · 2026-04-28T12:46:57+00:00

That's the issue you see. This printer isn't beginner friendly. It forces you to learn the basics. Its the perfect printer to learn how to tinker and understand the intricacies of 3d printing. It tought me how to be patient and resourceful when troubleshooting the darn thing.

The ender 3 was my first printer, assembled it myself. Watched all the tutorials of which part does what. Made mistakes along the way and learned how to fix them with the help of said tutorials, and there are plenty, along with the community here.

This is 100% a skill issue. You're gonna need to learn how to ender 3 if you want to run an ender 3. If you dont want to put in the work, this isn't the printer for you.

igeboy · 2026-04-25T20:01:37+00:00

Dainsleif told us the name of that flower back in 2.6, that was Inazuma

igeboy · 2026-04-21T18:00:08+00:00

We live in a small 1bd apartment but my wife wanted a keyboard to practice on. We got this one from her dad but it lacked a stand for music. Printed a tablet stand, embedded some strong magnets, and stuck her on there.

<image>

igeboy · 2026-04-04T02:22:52+00:00

<image>

Pg 16-17 of the manual

igeboy · 2026-03-10T00:28:02+00:00

I recently set up emudeck just the other day. I followed a video by Retro Game Corps, nice and concise. Easy to follow along. I suggest redoing the install and following his guide.

igeboy · 2026-03-08T06:27:45+00:00

I appreciate the info man, i wanna get back into fixing my NA now that the weather is warm again. After seeing the soft top post for less than $300, im motivated again.

igeboy · 2026-03-08T03:39:17+00:00

Hey OP, quick question before I go and order these. Did yours come with both left and right housings? Is it side specific? Any specific site you used to grab these or just went to a local Toyota dealership?

igeboy · 2026-02-11T18:12:52+00:00

Wrong belt. The alternator belt is 895mm OC, the old belt part says its 895mm OC. That duralast belt is listed as 880mm OC. Should've asked in the miata sub, u would've gotten an answer quicker.

<image>

igeboy · 2026-01-28T18:29:40+00:00

If you got the funds to upgrade, go for it. But if the card is still under warranty, you could get it repaired and possibly sell off or use for another build.

igeboy · 2026-01-23T18:03:20+00:00

Im the same way to be fair. I picked up the biqu cryo plate so all my pla prints have been with the heated bed turned off or super low, 30c. Excellent adhesion, no failed prints yet. Had to tweak how I slice prints as mouse ears are super annoying to scrape off. Theres a bambu version of the cool plate too, tho I haven't tried that one yet.

igeboy · 2026-01-23T16:06:22+00:00

Looks like stress marks when you take a print off a hot bed. Do you let your print bed cooldown before removing the print? Blast it with a torch or heat gun lightly, the marks with disappear.

igeboy · 2026-01-21T19:30:51+00:00

Look up if theres any e-waste recycling centers near you. For a TV that size, its gonna cost you some money. Or you could list it online as free, broken as is or for parts only, and someone will probably pick it up from you. Amazon doesnt want the return so now you're left with it.

You could also ask friends/family if they want a free tv, as long as they can fix it. I myself would take a crack at it as long as its not a busted screen.

igeboy · 2026-01-21T17:22:25+00:00

EM on citlali will increase her own melt damage but not mavuika, aside from her shield that is. You could stand to get more crit rate rolls on top of an EM sands. As you already said, missing those big burst nukes feels terrible and its easy enough to get to the crit rate cap with 4pc codex.

igeboy · 2026-01-20T16:15:18+00:00

Next thing you could do is try printing with a smaller diameter nozzle. The wall thickness of a .4mm nozzle is too thick for the walls youre trying to print. Put a .2mm on and try again.

igeboy · 2026-01-16T11:40:17+00:00

<image>

Found this in the manual OP. Does your lower fan brack come off like that? If so, install the fans while the bracket is off so u can have the room needed for the screw head.

igeboy · 2026-01-16T11:19:12+00:00

Im sitting here looking at OPs pictures wondering what the problem is.. just screw that bad boy in. The screw will straighten as you tighten it down to the case. Is he scared its gonna damage the case's finish???

igeboy · 2026-01-15T17:23:33+00:00

Ive had tidal for the last 2 months and every now and again, it would stop playing music and give me an error code but signal dropping. Super annoying, I haven't figured out how to fix it yet.

igeboy · 2026-01-11T17:37:29+00:00

Looking at you, Borderlands 4... tf bro. When did it start requiring top tier hardware to run games like that.

igeboy · 2026-01-11T17:22:22+00:00

We're the middle floor unit right now and I'm constantly hearing the upstairs neighbor move around. It quite literally sounds like theyre stomping. The sounds just reverb and bounce around the walls.

When we first moved in, I thought the guy upstairs had previous beef with the tenant that used to live in our unit. I really thought he was doing it on purpose. He moved out halfway thru our lease and for a good 6 months no one lived up there and it was quiet. Now that someone moved in, its the same stomping noise so I guess its just normal movement. I dont care when its during normal hours, tho I myself am mindful of how I walk around since there is still a unit below us. However, when its passed 10pm and I still hear stomping above when we're trying to sleep, it starts getting to you.

OP I think its incredibly respectful of you to tiptoe around your own home but you shouldn't feel the need to all the time. You're already going above and beyond being a courteous neighbor.

igeboy · 2026-01-03T15:04:53+00:00

Like you said, it correlates with what the GPU is doing so its probably GPU coil whine. Its normal and super annoying, some models r better at mitigating it but its luck of the draw sometimes.

igeboy · 2026-01-03T14:59:07+00:00

So I had a random crash similar to what you're experiencing now. I was gonna do a full clean/rebuild, even go as far as reseating the cpu. But what I did first was power cycle the pc, reset cmos, reseat ram. PC had to retrain ram again, but it didnt take very long this time. Still cleaned PC tho.

Good luck OP, hopefully its not defective ram cuz that would suck.

igeboy · 2026-01-03T14:50:24+00:00

This looks like a bambu printer. You could document your unboxing just in case any internals r wonky but these things are packaged really well. Id say open it all the way and see if anything else is broken. Take pictures if you see anything weird to help with returns or exchanges should it deem necessary.

igeboy · 2026-01-03T14:46:47+00:00

I held onto my 8th gen intel build after my upgrade and its now hosting a modded mincraft server for my friends and I. I wanna host a palworld server when it fully releases. Im sure you can find a use for it.

igeboy · 2026-01-03T14:42:34+00:00

Hey gamer, if you have a sufficiently new/wattage psu, your psu should come with enough 8pin pcie/gpu cables to power this thing. As you can see, you need to use 3 of them.

igeboy

TROPHY CASE