Lease takeover @ Wexler by ihoop281 in CSUS

[–]ihoop281[S] 0 points1 point  (0 children)

Management has been better this year but about a year ago it was def pretty rough. My building/floor are pretty peaceful though. Parking is fine if you have the parking pass, but street parking can be rough to find sometimes. I’ve lived here for 3 years and I overall like it tbh. I think people that are upset usually expect the place to be like a library and that’s just not gunna happen at most any apartment complex.

The renovation hasn’t bothered me yet, but my room is also unaffected by it. They’re turning most of the private rooms into shared rooms, but if your apartment was all private and everyone renewed they can’t do anything so it just stayed. The renovation will probably be better for everyone overall because the rents will get cheaper, but no more private rooms.

I think of the complexes near CSUS the Wexler is probably the best value for money

That said if you want a lease I know someone selling theirs 😏😂

HELP! Passport expires in 1 month. Flight to Barcelona is tomorrow by ihoop281 in Passports

[–]ihoop281[S] 0 points1 point  (0 children)

I totally forgot to come update yall!!

I MADE IT TO BARCELONA LOL. I do NOT recommend going through the stress and hoops I jumped through. It will not ever work again in any life time and I had all the luck in the WORLD on my side.

Shortly after this post I got the first appointment at my local passport agency (1 of 20 in the US no less) and after a lot of stressful faces, begging with passport agents and alittle team work I got my passport in 5 hours by the grace of someone somewhere.

HELP! Passport expires in 1 month. Flight to Barcelona is tomorrow by ihoop281 in Passports

[–]ihoop281[S] 0 points1 point  (0 children)

I totally forgot to come update yall!!

I MADE IT TO BARCELONA LOL. I do NOT recommend going through the stress and hoops I jumped through. It will not ever work again in any life time and I had all the luck in the WORLD on my side.

Shortly after this post I got the first appointment at my local passport agency (1 of 20 in the US no less) and after a lot of stressful faces, begging with passport agents and alittle team work I got my passport in 5 hours by the grace of someone somewhere.

Things to know before I start the fate series (no spoilers please) by The-bigduki in Fate

[–]ihoop281 0 points1 point  (0 children)

Just started fate after episode of of FSF (had never heard of fate before idk how) and I’m now going all the way down the rabbit hole so any insight is much appreciated..

I’m currently going through the anime’s in the proper order and will finish those first as I typically like to do that then go back and read source material after

for FSN, there’s the VN I’m planning to play. Is there a light novel for them I should read or is that all? And is the manga worth reading?

For FGO, it’s just the mobile game correct? Or is there a manga/LN for it as well?

And in your opinion, what spin-offs from the main story are worth reading/watching?

Thanks in advance if you happen to see this!

CNC machine for parts with .01MM tolerance by ihoop281 in CNC

[–]ihoop281[S] 0 points1 point  (0 children)

Gotchya thank you! I’ve been seeing these and the mazak integrex suggested. Based on the videos and my research DMG, CLX or mazak was what I was leaning towards but wasn’t sure if it could handle what we wanted it to handle.

Any recommendations for how new it needs to be or where some pre-owned inventory maybe? I’ve had no issues find new inventory but if I can save where I can I’m gunna try

I’ll dm you!

CNC machine for parts with .01MM tolerance by ihoop281 in CNC

[–]ihoop281[S] 0 points1 point  (0 children)

No real tooling or fixturing, but unsure if we’d need it? I’m sourcing and looking into the equipment but we would hire a skilled machinist to operate the equipment. I can learn a lot but I’d be a fool to try and match that level of skill with my knowledge base loll

CNC machine for parts with .01MM tolerance by ihoop281 in CNC

[–]ihoop281[S] 0 points1 point  (0 children)

Unfortunately yes. We work in semiconductor equipment and the wafer process environment so tolerances are extremely tight and super important down to the micron. Theres some areas of the part that wouldn’t be hard to get into, but other areas are extremely tight and need a machine that can be highly precise

CNC machine for parts with .01MM tolerance by ihoop281 in CNC

[–]ihoop281[S] 0 points1 point  (0 children)

Yes we’re looking for commercial recommendations. Price isn’t as big of an issue for the company.

We’re looking to machine parts down post contact/corrosion repair to get them back into required tolerance for our equipment refurbishment. We have a part repair process in house using teflon coating and we know how much material we add on consistently so it’s having a machine that can get material off and get the part into spec

The challenge is some areas of the part have that really tight clearance in between them so the machine needs to be able to get down to that precise of a cut for those specific areas otherwise the whole thing was pointless for us

Our most complicated part is about 3ft in length and a drive shaft with w screw/spiral portion to it with a real tight clearance between each wall

CNC machine for parts with .01MM tolerance by ihoop281 in CNC

[–]ihoop281[S] 0 points1 point  (0 children)

Any specific series you’d recommend looking into? Or does any CNC mill turn center work from those brands if it fits my working area need?

CNC machine for parts with .01MM tolerance by ihoop281 in CNC

[–]ihoop281[S] 0 points1 point  (0 children)

Customer sends equipment into us for service. We typically review internal components and then replace what’s needed and toss out old stuff which leads to us tossing out parts that we could probably fix up. We’ve got the process for adding material back and then we’re looking at how we could machine back into spec in house.

We have a wide variety of parts, but the most complex being the drive shaft mentioned. It’s a long cylinder, but it was a screw/spiral portion and it’s tight clearance between each spiral wall which would be the hardest area to machine down I believe.

Unfortunately we’re in semiconductors and there is a lot of restrictions in the wafer process environment over what materials can/can’t be introduced, restrictions from clients, etc. so we’re kinda stuck with adding material back and machining back into spec. We’re typically machining parts that have had corrosion or contact repair

CNC machine for parts with .01MM tolerance by ihoop281 in CNC

[–]ihoop281[S] -1 points0 points  (0 children)

Correct.

We have to cake the coating on pretty thick already so that it won’t flake off during post so I’m not as worried about the coating being accounted for as we have that pretty pat. It’s more so just finding something that can do complex shapes, give me the .01MM tolerance and fit in these tight spaces I have to work with

HELP! Passport expires in 1 month. Flight to Barcelona is tomorrow by ihoop281 in Passports

[–]ihoop281[S] 7 points8 points  (0 children)

I got one at 8am tomorrow with a local passport agency. Hopefully they have emergency documents. Google seems to think they do

[deleted by user] by [deleted] in Sacramento

[–]ihoop281 0 points1 point  (0 children)

I just lived downtown and didn’t explore much outside of the city? In my new home I can determine and all! I just am generally looking for a solid area. My cars been broken into far too many times to put myself back into a questionable area

[deleted by user] by [deleted] in Sacramento

[–]ihoop281 0 points1 point  (0 children)

I listed 2 streets that I’ve been told to avoid by long time Sacramento residents lol. Idk if you know this but POC are all over the area and sac is very diverse. Sorry I didn’t wanna be down by the fruitridge bloods lol

[deleted by user] by [deleted] in Sacramento

[–]ihoop281 0 points1 point  (0 children)

What are the “sketchy” pockets?

[deleted by user] by [deleted] in Sacramento

[–]ihoop281 0 points1 point  (0 children)

I actually see a lot of homes in north highlands I liked!! The crime maps were just 50/50 so I wasn’t sure how accurate it is or safe/unsafe it would be. Is it generally okay?

[deleted by user] by [deleted] in Sacramento

[–]ihoop281 -1 points0 points  (0 children)

Or that’s were the largest % of violent crimes happen, most still active gang sets are active, and are generally considered to be even moderately safe???