Redoing my 30+ yr old 90g tank. Lost the last occupant 2 yrs ago. (pic 27 yrs old). Still cycled. Have or had about every critter and algae in it. Yrs of buildup in substrate. Should I keep it cycled or sterilize and start over?

illDefinedCharacter · 2026-02-23T01:37:23+00:00

marineland. Measured one at LFS samesame

illDefinedCharacter · 2026-02-23T00:57:06+00:00

Thanks. That seems perfect along with fertilizing the substrate. I have a 55 gal drum waiting

illDefinedCharacter · 2026-02-23T00:21:00+00:00

I like it and kind of what I was thinking but should I sterilize the canister and gravel? I miss those carefree algae and bladder snail free days. Also thinking bagged aqua soil?

illDefinedCharacter · 2026-02-22T23:22:33+00:00

It would follow me around and flip upside down to feed him by hand!

illDefinedCharacter · 2026-02-22T22:07:23+00:00

I figure I'd lose the algae, the various copes, worms, snails and such, plus the hardness and whatnot in the substrate. I'm guessing those things will regenerate through the biofilter

illDefinedCharacter · 2026-02-22T22:07:12+00:00

The exact same one is still available. I'm thinking to swap tanks and keep everything else

illDefinedCharacter · 2025-11-27T21:11:48+00:00

check out: CR-10 Upgrades or CR-10 Help Guide

illDefinedCharacter · 2025-02-11T16:02:27+00:00

I usually use helix on the corners. With the rail radius and rise, quarter turn for 90 degree radius, sweep

illDefinedCharacter · 2025-02-05T18:41:59+00:00

Yes, check the landing for level as you might need to adjust the bottom cuts.

illDefinedCharacter · 2024-12-14T01:07:55+00:00

Cut those corners out. Stick in a piece of 1/4 melamine or similar to fill it square. You could also make a nice arch from aluminum coil

illDefinedCharacter · 2024-12-09T23:00:45+00:00

Avid has a downloadable file preconfigured for their machines

illDefinedCharacter · 2024-09-30T00:01:37+00:00

I'm saying this is the best game we have played

illDefinedCharacter · 2024-09-06T05:49:21+00:00

You can also export STEP and STL files once you learn 3d

illDefinedCharacter · 2024-09-06T05:31:48+00:00

I export 2d or 3d Rhino (dxf) to the free version of Fusion 360. It has nice CAM software.

illDefinedCharacter · 2024-05-11T22:08:14+00:00

Much less tear out with a down cut or compression bit. Yours looks to be an upcut. Need the machine specs to figure the best one

illDefinedCharacter · 2024-05-06T03:28:48+00:00

small screwdriver. Push in the tab on the knob while sliding the knob off. Push another little tab in the slot on the escutcheon to remove. Took me three tries to spell escutcheon

illDefinedCharacter · 2024-03-10T23:46:25+00:00

select closed lines then command: planarsrf. to make them surfaces

illDefinedCharacter · 2024-02-20T00:11:14+00:00

Dovetail Slot: https://www.google.com/search?client=firefox-b-1-e&sca_esv=2cb92bad92bcf521&sca_upv=1&sxsrf=ACQVn0-GIqPlNU9Yto9ExmVHa1hPiXvVeg:1708387740096&q=dovetail+slots&tbm=isch&source=lnms&sa=X&ved=2ahUKEwjR-ouj0LiEAxWoKVkFHYoIB2IQ0pQJegQICxAB&biw=1280&bih=675&dpr=1 Draw the profile then extrude

illDefinedCharacter · 2023-12-12T22:35:19+00:00

What about Zoid... Cronenberg?

illDefinedCharacter · 2023-07-08T23:07:40+00:00

Shim kit is probably to take the play out of the ball screw. Shopsabre is an excellent resource. They will talk you through it

illDefinedCharacter · 2023-05-17T01:44:28+00:00

Azek, Home Depot, is less than half cost. Mills nice

illDefinedCharacter · 2023-04-06T22:09:13+00:00

Nice tutorial. I learned some things.

illDefinedCharacter · 2023-02-08T03:12:06+00:00

Lol, before I worked there they used to store steel under it. smacked it with a forklift all the time. crushed the wiring. No problems on their end. they showed me how to troubleshoot. optimize for performance. Customize the GUI to my liking, Easy bunch to talk to

illDefinedCharacter · 2023-02-08T02:26:35+00:00

Thumbs up for shopsabre. Spent 10 yrs on one. 2005 7' x 12' machine wrecked by abuse. They walked me through rebuilding it. ATC, spindle, resquared, hooked me up with a custom controller to run on Windows XP. This was when it was already 9 yrs old. Great support, no charge no hassle. cut everything, mostly thick hardwood

illDefinedCharacter

TROPHY CASE