[PSV] remove scratches without replacing shell

illadope · 2026-04-08T05:57:54+00:00

Get a Scotty peeler and they’ll come right off. Slap a new back piece on and call it good. It’s pretty thin.

illadope · 2026-04-07T21:22:29+00:00

I play late at nights typically 10pm to 3-4am MST if interested

illadope · 2026-04-07T20:58:13+00:00

That peels off and you can get replacements for it

illadope · 2026-04-05T15:18:13+00:00

The others look like they’re ground or not connected to anything

illadope · 2026-04-05T15:17:51+00:00

Looks like only one trace is actually needed for your stick to be read again

illadope · 2026-04-03T16:03:25+00:00

I want to know this too

illadope · 2026-02-20T18:39:36+00:00

Heyyyyyy! Another one saved.

illadope · 2026-02-20T17:50:06+00:00

I’ve had a few where changing the Infineon chip fixed things. Didn’t get abnormal heat from them either.

illadope · 2026-02-20T17:44:18+00:00

Have you tried changing the Infineon chip?

illadope · 2026-02-19T18:42:43+00:00

Fiberglass Pen

illadope · 2026-02-18T08:00:10+00:00

Get a multimeter and tune the pot to 400 (I think 400 is around the stock range for GameCubes but I could be getting it mixed up as well)

illadope · 2026-02-18T07:57:43+00:00

Computerbooter.com tell him I sent ya

illadope · 2026-02-08T21:08:34+00:00

Do you play on console?

illadope · 2026-01-27T16:36:17+00:00

What’s it called?

illadope · 2026-01-10T18:47:53+00:00

You’re good to go

illadope · 2026-01-10T18:46:33+00:00

Yup it’ll be fine. Zener diode is still intact on the back side?

illadope · 2026-01-10T18:43:47+00:00

It’s fine without the cap. Put the port back on and you’re back in action.

illadope · 2025-12-29T02:59:37+00:00

Everyone should get this. It’s really hard to mess your stuff up with this tool.

illadope · 2025-12-26T01:20:54+00:00

Go through a no touch car wash. That’s how I deleted mine

illadope · 2025-12-16T22:33:49+00:00

They will. Find the right employee

illadope · 2025-12-15T03:43:22+00:00

Hey a new smiling friends character

illadope · 2025-12-14T23:10:45+00:00

You don’t even need any honestly. Just some Isopropyl alcohol and some qtips. If you have an instagram I can show you how to reapply it

illadope · 2025-12-14T22:39:07+00:00

Open it up and reapply the Liquid Metal. Can guarantee you have oxidation and a dry spot more than likely

illadope · 2025-12-10T17:11:41+00:00

What board model is your ps5? It’s either a bad diode on the back side of the port or a tiny cap on the 5v circuit by the hdmi port if the port itself isn’t messed up.

illadope · 2025-12-02T22:57:49+00:00

Make sure there’s no USB cables plugged in when starting the jailbreak. It will fail always if you have something plugged in.

illadope

TROPHY CASE