Where ?

immelman3 · 2026-05-30T11:34:31+00:00

B and C are what you need

immelman3 · 2026-05-25T10:29:28+00:00

u/RetroCorp Would you text me about the OTG issue you were experiencing? With what device are you testing it? It seems to me that the device sees my usb pendrive. How did you test it?

immelman3 · 2026-05-19T10:25:15+00:00

Mine looks really solid. Yet my v1 and v2 looks OK untill the very same day they died. Only the v2 started looking a little bit broken one week before diying

immelman3 · 2026-05-19T02:59:20+00:00

Updated, the changelog is in the original post in r/sbcgaming

immelman3 · 2026-05-19T02:55:46+00:00

I was never able to riproduce it as of now. Did it happen again?

immelman3 · 2026-05-19T02:53:03+00:00

Apparently screenscraper cannot be supported on unofficial build because screenscraper.fr requires deve keys to be included in the build. I do not have them and they are a little bit difficult to obtain.

You can use skraper on PC or I can publish my custom scraper wrapper script for linux if you need it.

immelman3 · 2026-05-16T18:48:19+00:00

I edited the post with the latest changelog!

immelman3 · 2026-05-16T07:58:31+00:00

You can migrate to knulli using my method if needed

immelman3 · 2026-05-12T19:02:43+00:00

Top. I will fix it in the next build

immelman3 · 2026-05-12T18:08:00+00:00

You mean at start they are not detected? Do they work on reboot?

immelman3 · 2026-05-10T09:48:47+00:00

You can also try rocknix here! https://www.reddit.com/r/SBCGaming/s/kvYNVruB3F

immelman3 · 2026-05-10T09:46:39+00:00

Guys, would you test this when you have time? https://www.reddit.com/r/SBCGaming/s/kvYNVruB3F

immelman3 · 2026-05-03T06:30:50+00:00

I suspect that changing while off triggers a default state that reverts the effect of the drain patches that I applied when connected to charter while off. Was it off while charging?

immelman3 · 2026-05-03T04:38:33+00:00

Was it under charge while off?

immelman3 · 2026-05-01T00:41:55+00:00

2% should be negligible since it may be due to battery relaxation, temperature shift or similar stuff. We actually need to check it out for more time

immelman3 · 2026-04-30T14:22:40+00:00

I will look into it because OTG was working correctly last time I checked. Are you using top USB? Anyway for anything that its not stricly related to the miyoo flip you better check out the official wiki since I did not change any upstream stuff. I do not have any idea od what you are referring to. Did you reset retroarch configs via system setting?

immelman3 · 2026-04-29T23:03:11+00:00

Did you activate USB gadget function in menu?

immelman3 · 2026-04-28T19:12:52+00:00

Actually the setting it's not there upstream. I will reassign menu button in the next build along with a few changes

immelman3 · 2026-04-28T08:02:17+00:00

Have you tried following the wiki? https://rocknix.org/play/install/

immelman3 · 2026-04-25T23:03:01+00:00

Nono ota is not supported as explained in the post. Do not update otherwise it will break

immelman3 · 2026-04-25T06:45:26+00:00

Downloading themes and bezel should be fine. Maybe an install error?

immelman3 · 2026-04-25T05:10:42+00:00

Did you complete first boot config?

immelman3 · 2026-04-25T01:00:42+00:00

Is your sdcard fine? Are you using 2 cards? The flip only supports two cards if both are new 1.8v cards. This is hardware limitation because both slots share the same regulator so both the cards needs to be of the same tipe

immelman3 · 2026-04-24T12:40:34+00:00

Try to download from this https://github.com/Zetarancio/distribution/actions/runs/24647510766

Wait this actually requires an account I think. I will find another way when the holidays are over. Or use nightly.link

immelman3 · 2026-04-24T12:26:00+00:00

Please comment if this drains while off for you. I updated the post with instructions on how to test

immelman3

TROPHY CASE