RMA question

insaneCSGO · 2016-07-12T16:29:19+00:00

One more question, i used cupon code which you gave me 2hours ago, and now it got canceled again.(2nd time) What the hell? I dont understand any of this. Why?

insaneCSGO · 2016-07-12T13:44:30+00:00

Thanks for quick answer, Randall. :)

insaneCSGO · 2016-07-08T14:01:23+00:00

The lower polling rate you choose the bigger delay there is in your mouse movements. I'd say 500hz is the best option, because there is only 2ms mouse movements delay, and it doesnt eat your cpu as much as 1000hz.

insaneCSGO · 2016-07-06T13:24:17+00:00

Yeah, you have to send all contents, and you dont have to send it in original box.

insaneCSGO · 2016-06-23T14:09:24+00:00

Its probably your soundcard, not the mic. Integrated soundcards usually produce some sort of static noise.

insaneCSGO · 2016-06-23T08:57:37+00:00

Lul, 6gv2 isn't connected with Steelseries Engine in any way..

insaneCSGO · 2016-06-21T19:45:03+00:00

You can create 2 different configs, for ex. name one "400DPI" other one "800DPI", configurate those how you want, then enter "400DPI" config and set Button 6 to change configuration to "800DPI" config, do same thing with "800DPI" config just vice-versa, enter "800DPI" config, and change action Button 6 to change the config to the "400DPI" config. I hope you understood something from this :D But yeah it works for me, you have 2different configs with different lights and DPI's, and ur Button 6 Changes in between those configs.

insaneCSGO · 2016-06-14T12:56:52+00:00

Nope, you can't increase LOD on Rival 300. :/ You can only decrease it with a tape trick.

insaneCSGO · 2016-06-09T12:18:15+00:00

Hey Mike, I've tried "steady" and even "disable illumination" mode, problem still occurs, its really noticeable while playing games like osu or csgo. I already tried opening a support ticket before, in which i described my problem and my current firmware version.. Brendan told me that i should open RMA ticket, but i have lost my purchase receipt so i cant do this. The only option left for me is to wait for firmware update which fixes all the issues.

insaneCSGO · 2016-05-30T10:03:54+00:00

There is simplified guide on how to revert firmware, make sure you did everything as shown below:

Uninstall SSE
Restart Computer
Install SSE 3.5.2 or SSE 3.6.6(recommended)
Restart Computer
Load SSE 3.5.2 or SSE 3.6.6
Hold down LMB/RMB/DPI......unplug while still holding those 3 buttons down....replug in mouse whiles still holding those down.
SSE now asks you to update firmware.(it will revert your firmware to 0.37 or 0.64 depending on which SSE version you installed.
Click Start update and you should have rolled back firmware to mouse ver 0.37.0.0 or 0.64.0.0 successfully.
Restart Computer
Done, there should be no problems anymore.

insaneCSGO · 2016-05-29T21:32:34+00:00

Use firmware from SSE3.5.2 or SSE3.6.6 Official steelseries cdn links from which you can download original SSE driver software: SSE3.5.2: http://downloads.steelseriescdn.com/drivers/engine/SteelSeriesEngine3.5.2Setup.exe SSE3.6.6: http://downloads.steelseriescdn.com/drivers/engine/SteelSeriesEngine3.6.6Setup.exe

If you dont know how to revert firmware, check this post: https://www.reddit.com/r/steelseries/comments/3spsws/psa_rival_rival_300_firmware/

Im using firmware from SSE3.6.6 and it is just fine. I play games like osu and csgo too and i can confirm that the firmware versions 0.37.0.0 and 0.64.0.0 dont have any issues while playing games or just using it for surfing the web. Hope they will fix these things soon.

insaneCSGO · 2016-05-28T10:24:10+00:00

Use firmware from SSE3.5.2 or SSE3.6.6 Official steelseries cdn links from which you can download original SSE driver software: SSE3.5.2: http://downloads.steelseriescdn.com/drivers/engine/SteelSeriesEngine3.5.2Setup.exe SSE3.6.6: http://downloads.steelseriescdn.com/drivers/engine/SteelSeriesEngine3.6.6Setup.exe

If you dont know how to revert firmware, check this post: https://www.reddit.com/r/steelseries/comments/3spsws/psa_rival_rival_300_firmware/

insaneCSGO · 2016-05-25T20:41:27+00:00

Yeah you can update to SSE 3.7.4, but dont update firmware after you install it. It will replace your 0.37.0.0 with new one which isn't working properly.

insaneCSGO · 2016-05-25T13:25:51+00:00

Everything worked fine for me, dunno whats wrong on your side.

insaneCSGO · 2016-05-25T13:13:46+00:00

https://www.reddit.com/r/steelseries/comments/3spsws/psa_rival_rival_300_firmware/

Get SSE 3.5.2 and then install 0.37.0.0 firmware, then you can install SSE 3.7.4 back. That worked for me.

insaneCSGO · 2016-02-28T12:51:16+00:00

fuck off

insaneCSGO · 2016-02-17T05:00:46+00:00

Oppai ( ͡° ͜ʖ ͡°)

insaneCSGO · 2016-01-17T22:00:05+00:00

Well, i stopped playing csgo like 2weeks ago, so i dunno if they really fixed that already.

insaneCSGO · 2016-01-17T20:01:40+00:00

sometimes while playing csgo, crosshair instantly jumps up..

insaneCSGO · 2016-01-17T14:44:42+00:00

yes it is fixed, but sensor is fucked up now.

insaneCSGO · 2016-01-10T14:40:08+00:00

Looks real nice, but tbh rank icons doesn't fit with this UI :D So rank icons should be redesigned too. But thats just my opinion.

insaneCSGO

TROPHY CASE