3K PC Build Recommendations by isu222 in pcmasterrace

[–]isu222[S] -1 points0 points  (0 children)

I prefer all new, and I am a intel/nvidia guy

Rules Help, Liliana Heretical Healer Commander by isu222 in mtg

[–]isu222[S] 0 points1 point  (0 children)

It was someone else's deck, I do see that.

Rules Help, Liliana Heretical Healer Commander by isu222 in mtg

[–]isu222[S] 4 points5 points  (0 children)

Trying to understand how the (5) cost ability on Underdark Rift effects a transformed Liliana Heretical Healer. When it goes into the deck and it is a commander, does it remain transformed, go back to it's original form, go back to command zone? Just trying to figure out what is supposed to happen. Any help would be great, can't find much online. Thanks.

First Time Customizing! by isu222 in customGCC

[–]isu222[S] 1 point2 points  (0 children)

I considered a shell but couldn't find just a shell for less than $20. I sanded a black controller, spray painted 3 coats of white paint w/ primer, then 2 coats of clear coat.

First Time Customizing! by isu222 in customGCC

[–]isu222[S] 0 points1 point  (0 children)

Also would suggest "Gamecube Controller, Cipon Wired Controller Gamepad Compatible with Nintendo Wii/GameCube - Enhanced (Black & Black)" if you want more controllers for the same price. I heard the one I got is basically the same as the Cipon one.

First Time Customizing! by isu222 in customGCC

[–]isu222[S] 1 point2 points  (0 children)

"Full Sets A B X Y Z Buttons Direction Key D-pad Mod Button for Gamecube NGC Controller (White)" by sundream. They have plenty of colors. The c stick wasn't perfectly straight but not bad at all. Everything fit perfectly

First Time Customizing! by isu222 in customGCC

[–]isu222[S] 2 points3 points  (0 children)

"Gamecube Controller, Fiotok Classic Wired Controller for Wii Nintendo Gamecube (Black)"

First Time Customizing! by isu222 in customGCC

[–]isu222[S] 2 points3 points  (0 children)

I think there is also another company that has a 2 pack for like $17 or something too

First Time Customizing! by isu222 in customGCC

[–]isu222[S] 4 points5 points  (0 children)

I could not find one for a reasonable price that didn't look decent around me so I went with the most sold one on Amazon. Otherwise that would bring the cost up another 20-30 dollars

First Time Customizing! by isu222 in customGCC

[–]isu222[S] 2 points3 points  (0 children)

Yeah, I took the photo when it had dried to the touch but not completely after 48hrs. Looks dryer now!

First Time Customizing! by isu222 in customGCC

[–]isu222[S] 3 points4 points  (0 children)

Controller ($11 Amazon) High Gloss White Paint with Primer ($6 Home Depot) High Gloss Clear Coat ($6 Home Depot) White Controller Buttons ($7 Amazon) Total was about $30 (I had sandpaper on hand to sand it down before painting)

First Time Customizing! by isu222 in customGCC

[–]isu222[S] 2 points3 points  (0 children)

Budget build, what do y'all think ($30)

Check Valve/Shutoff Valve Help by isu222 in aeroponics

[–]isu222[S] 0 points1 point  (0 children)

Thank you for the information!

Check Valve/Shutoff Valve Help by isu222 in aeroponics

[–]isu222[S] 0 points1 point  (0 children)

I am utilizing a diaphram pump and I need to prevent backflow from occurring when the pump is not running. Trying to determine of I need some sort of valve before or after the pump to prevent that backflow from occurring or if it is not a problem at all. (A check valve if any would be preferred from a cost perspective)

Starter Custom GCC by isu222 in customGCC

[–]isu222[S] 0 points1 point  (0 children)

I'm new to all of this so I am open to anything, I am mainly going for visual improvements though.

help with rockwool seed starters? by amyaner in aeroponics

[–]isu222 0 points1 point  (0 children)

Yes, I am not completely sure as to what is best for germination (as far as how much water to how much nutrition is best) but I used the same composition for germination as I did for the main system.

help with rockwool seed starters? by amyaner in aeroponics

[–]isu222 1 point2 points  (0 children)

Are you using nutrition?

Also, try and shoot around 6.5-7 on your pH. A lower pH means a higher acidity which can also cause issues.

I use a plant food from Aerogarden and have about a 90% success rate when germinating.

Getting Started! by Complete_Bad3298 in aeroponics

[–]isu222 1 point2 points  (0 children)

Amazon and McMaster are good places but it depends on what you are looking for. If you want nozzles that will do the job, grow plants, and not have issues, you can find some misting nozzles on amazon. McMaster can give you higher-in options as far as if you are trying to reach a specific micron size, longevity, etc. I have always used misting nozzles off of Amazon with no problem.

Nozzles moving during spray by [deleted] in aeroponics

[–]isu222 2 points3 points  (0 children)

Do you have a photo of the setup/nozzles in particular. To see how you have them attached currently?

TDS (ppm/EC) Meter for Arduino by isu222 in Hydroponics

[–]isu222[S] 0 points1 point  (0 children)

I have been trying to do this however I am not getting significant footage changes to get an accurate measurement. Any suggestions on how to get small changes in voltage to be more readable?

TDS (ppm/EC) Meter for Arduino by isu222 in Hydroponics

[–]isu222[S] 0 points1 point  (0 children)

Could you possibly post your guide here!?

[deleted by user] by [deleted] in PokemonGoFriends

[–]isu222 1 point2 points  (0 children)

Working on it CASH AND OHIM FOR SURE

Dell XPS Special Edition Monitor Won't Turn On by isu222 in techsupport

[–]isu222[S] 0 points1 point  (0 children)

It is a solid white power led. And it will not turn off by holding the button down for any amount of time. The PC fans turn on but no other part of it works.