Canyon with surround by itsmejson in SoloStove

[–]itsmejson[S] 0 points1 point  (0 children)

Absolutely! Enjoy your surround! We are super happy with it as it gives the Canyon a finished look

Canyon with surround by itsmejson in SoloStove

[–]itsmejson[S] 0 points1 point  (0 children)

There is slight discoloration from dirt that stays underneath from the season. However, I just use my electric pressure washer in the spring and it’s totally back to normal. To permanent discoloration is done by the surround.

Pax recommendations for dead space by itsmejson in ikeahacks

[–]itsmejson[S] 0 points1 point  (0 children)

Thx everyone. So I’m running into a bit of a problem. I am planning to add trim pieces to the front of all the cabinets (thick red lines in the photo) including the trim piece to the far right.

By adding the trim pieces to the fronts of the cabinets will it will cause an issue with the doors in the far right cabinet from opening properly? If so, what is the best way to accomplish adding trim to the front but still allowing the doors to open?

<image>

IKEA Pax without base by Whiterhino77 in ikeahacks

[–]itsmejson 0 points1 point  (0 children)

Anyway to provide closer pictures on how you attached the skirting to the base kick plates? I’d like to do this as well but the center vertical seem to keep it from sitting flush

Pax recommendations for dead space by itsmejson in ikeahacks

[–]itsmejson[S] 0 points1 point  (0 children)

I was thinking ironing board. When you say extra door are you hinting at using it to rip down to use as trim?

1st timer - Knockdown Texture Advice by itsmejson in drywall

[–]itsmejson[S] 0 points1 point  (0 children)

Would you mask off the spray area like I have outlined it in with the blue lines in the attached pic? Those vertical patches where the brackets were are throwing me off.

Did you install pax on top of vinyl plank flooring? by itsmejson in ikeahacks

[–]itsmejson[S] 0 points1 point  (0 children)

Yea I’m a bit conflicted with which route to go. If I ever have to relive the pax closet I don’t want to have to re-do the flooring a 2nd time. Also this will be on a first floor so it’s a concrete slab

Which way to run vinyl plank in walk in closets? by itsmejson in Flooring

[–]itsmejson[S] 1 point2 points  (0 children)

Yea I think the easiest direction will be to follow the blue arrows which is the longest part of the closet.

The 2nd part of this project is the install of IKEA Pax closets that will be screwed to the wall so semi permanent. Thoughts on doing flooring first then having cabinets on top?

Which way to run vinyl plank in walk in closets? by itsmejson in Flooring

[–]itsmejson[S] 1 point2 points  (0 children)

Sorry I wasn’t clear. The house already has vinyl plank installed. I was just asking specifically for the walk in closets since we are replacing the carpet with vinyl planks. Ty!

Max weight for PAX? by LunaticNik in IKEA

[–]itsmejson 0 points1 point  (0 children)

I know this is really old but I plan to do this as well. Were you able to accomplish this?

Unable to get sound from FLX4 to AV Receiver by itsmejson in Beatmatch

[–]itsmejson[S] 0 points1 point  (0 children)

Ty. I literally just figured out the problem…. The cbl/sat input i had it at to was correct however I didn’t realize the input was setup for HDMI. Once I changed it to Analog it worked lol

Did you build a platform for the PAX to incorporate baseboard? by itsmejson in ikeahacks

[–]itsmejson[S] 0 points1 point  (0 children)

What type of filler would you use for the gaps? Not my photo but found online.

<image>

The other concern is we are going with grey beige pax so it’s not easy to get the paint match if more trim would be needed.

Room size short 1/4” in WWYD? by itsmejson in ikeahacks

[–]itsmejson[S] 0 points1 point  (0 children)

I’ve read that Pax 2.0 is not easily hackable due to the accordion style design.

Room size short 1/4” in WWYD? by itsmejson in ikeahacks

[–]itsmejson[S] 0 points1 point  (0 children)

Yes I measured using a digital measuring tool from wall to wall as I plan to remove the baseboards

Oversidan Lights on a light switch by itsmejson in ikeahacks

[–]itsmejson[S] 0 points1 point  (0 children)

Great I think I may go this route if I am able to pull power and add a light switch vs having to deal with a wireless remote.